Best sellers

Showing 1249-1272 of 2073 item(s)

Control Panels

Table of manoeuvres Beninca BRAINY for 1 or 2 actuators at 230 V

Beninca

9176213

€207.00

Table of manoeuvres Beninca BRAINY for 1 or 2 actuators at 230 V ideal for swinging, sliding or swinging doors.

Tubular transmitters & accessories

Niceway command 1 drive open-stop-close

Nice

WM003C

€35.00

Module for the operation of 1 automatic open-stop-close in single or multi-group mode.

Receiver card adapter connection 6 pins with output 4 pins

Receiver cards

Receiver card adapter connection 6 pins with output 4 pins

Tecnoparking

ADAPTADOR 6P/4P

€15.00

Other, of circular cross-section for steering wheels with connection 6 pins with output 4 pins other, of circular cross-section Clemsa Mutant code is RNE248.

RFID readers and keys

Casing or adapter Clemsa AD2000 for RFID readers CK40, CK42

Clemsa

130000141603

€8.00

Casing or adapter Clemsa AD2000 for RFID readers of models CK40, CK42.

Swing Gate Motors

Engine buried Nice L-Fab HS for rapid actuation of swing doors up to 4 m

Nice

L-Fab HS

€443.00

Engine buried and removable Nice L-Fab HS at 24 V for rapid operation of sliding doors up to 4 m. It incorporates magnetic encoder and mechanical stoppers. Ideal for intensive use and fast manoeuvres (aperture 90o in approximately 6 sec)

Swing gate accessories

Enclosure Erreka Stainless steel NHENC

Erreka

NHENC

€29.00

Enclosure for double swinging door allowing the first sheet to be fixed to the ground once the second sheet has been closed.

Replacement plates

Table of manoeuvres Nice OGA2N for SHEL75KCE sectional engine

Nice

OGA2N

€85.00

Table of manoeuvres Nice OGA2N at 24V for SHEL50KCE, SHEL60KCE and SHEL75KCE sectional motor. What. The plate has a built-in receiver at a frequency of 433.92 MHz and functions of automatic shutdown, motion regulation and reversal of motion in case of obstacles during travel.

Roller Garage Door Motors

BiMotor Forsa UNIKO R-60 2M Without electric brake for roller shutters up to 153 kg

Forsa

SAT012

€281.00

Bi-engine Forsa Unless otherwise specified in the EU-type examination certificate, the requirements of this Regulation shall not apply for roller shutters up to 153 kg. As a result of the tireless search for improvements in the functional characteristics of our automatic doors and thanks to innovative construction solutions, we present a team capable of...

Overhead door accessories

Motor support Hydom ROTOR UNIC for revolving doors

HYDOM

9940/85

Support for the installation of the Hydom ROTOR-UNIC engine in tilting doors.

Hydraulic motor Aprimatic LEVA50 intensive use for...

Hydraulic motor Aprimatic LEVA50 intensive use for... 2

Overhead Door Motors

Hydraulic motor Aprimatic LEVA50 intensive use for tilting doors up to 10m2/16m2

Aprimatic

LEVA50

€598.00

Hydraulic motor Aprimatic LEVA50 intensive use for use in the manufacture of motor vehicles up to 10m2 and MAXILEVA50 for doors up to 16m2. Hydraulic operator for one- or two-bladed counterweighted swing doors. Torque control valves incorporated. Hydraulic deceleration at the end of the journey. Intensive use. Hollow shaft.

Replacement plates

In the case of vehicles of categories M1 and N2 with a maximum mass not exceeding 2000 kg:

Nice

RUA1

€183.00

This is the NICE RUA1. Control electronic plate RUN 1800 / RUN 2500 for sliding motors of automatic doors and entry gates weighing up to 1800 kg and 2500 kg in its two versions with this model of control manoeuvring box for a totally safe and efficient configuration of its functions thanks to this control centre

Engine Nice Slight with integrated central and absolute...

Engine Nice Slight with integrated central and absolute... 2

Sliding Gate Motors

Engine Nice Slight with integrated central and absolute encoder for sliding doors up to...

Nice

SLH400

€358.00

Engine Nice Slight with integrated control unit and absolute encoder for sliding doors up to 400 kg and 6 m in length.

Home

Engine Novelforis for use in the manufacture of motor vehicles

Novelforis

NF-EMBA

€85.00

Motor centre axle NF-EMBA SERIES for use in the manufacture of products falling within heading 8528 [1], ideal for powering commercial doors or private garages. The electro-brake brakes the blind once it's closed and avoiding opening it manually. The motor includes the auto brake unlock (black cable), to be able to activate the blind in case of lack of...

NICE TOONA 5 engine for swing doors up to 5 m

Swing Gate Motors

NICE TOONA 5 engine for swing doors up to 5 m

Nice

TOONA 5

€327.00

Electromechanical engine NICE model TOONA 5external mounting for residential swing doors with blades up to 5 metres. Also available in 24Vdc version, with magnetic encoder.

Sectional Door Motors

Motor roof head BFT "TIZIANO' 600 N for sectional doors of up to 10 m2

BFT

P915199 00002

€163.00

Operator BFT "TIZIANO B GDA 260 S01' for sectional garage doors with a tensile strength of 60 kg and heavy duty. What. Area of the door 10 m2. Opening speed 6.6 m/min. D-Track NotesThe following: this product consists only of the engine head, intended for replacement. If you need all the material to drive a section door, we have the FRENCH KIT.

Software engineer Nice O-Box multifunction with software...

Software engineer Nice O-Box multifunction with software... 2

Repeaters

Software engineer Nice O-Box multifunction with software for programming transmitters...

Nice

O-BOX

€315.00

O-Box is the multifunctional interface that, through the dedicated software O-Box Software Suite”, allows you to configure and program directly with a PC or PDA, in a simple and intuitive way, transmitters and receivers other, of circular cross-section Nice.

RFID readers and keys

Receiver base + decoder Erreka for RFID proximity keys

Erreka

TAGBASE-250

€86.00

Receiver base + decoder Erreka TAGBASE-250 for proximity keys RFID. Interface relay for plug-in receiver power supply 230Vac or 12-24Vac/dc

Product available with different options

Tubular transmitters & accessories

Hexagonal curved axle 60 mm

EJE EXAGONAL

€10.00

Hexagonal curved axle of 60 mmfor tubular domestic blinds.

Replacement plates

Table of manoeuvres TMP WHAT'S UP

TMP

QJAGUAR LOW

Replacement of maneuver box or electronic plate TMP Jaguar. Equipment designed for motor drive TMP Jaguar Low of Duty Duty to 24V and Encoder. The plant incorporates a Internal receiver at 433,92 MHz compatible with controls TMP Link.

Vertical electric lock Nice PLA10 to 12V for swing doors

Electric locks

Vertical electric lock Nice PLA10 to 12V for swing doors

Nice

PLA10

€91.00

Vertical electric lock Nice PLA10 to 12V for sliding doors. The use of these electric locks is mandatory for non-lock vibrating motors with blades over 3 metres.

Rails & accessories for sectional doors

Kit to unlock from the outside with key V2 AZIMUTH

162537

€30.00

Kit to unlock from the outside with key V2 AZIMUTH

Traffic lights

Table of manoeuvres V2 CITY5 for traffic light management

CITY5

€103.00

Table of manoeuvres V2 CITY5 230V digital for the management of a traffic light installed near a vehicle crossing with a two-way direction of travel.

Table of manoeuvres DEA 200SR for revolving doors 230V

Replacement plates

Table of manoeuvres DEA 200SR for revolving doors 230V

DEA SYSTEM

200SR

Table of manoeuvres DEA 200SR for use in 230Vac engines with race finishes by times. The electronic plate is mainly used for the motor DEA 901L of tilting or preleving doors.

Repeaters

Software engineer Clemsa It's called MutanCODE PT7 for PC

Clemsa

130000141965

€152.00

Facility manager via PC and SW 7 software (including) MUTANcode and MUTAN II systems. This is database management. Issuers N, NT and T. " THE PT7 MODEL HAS BEEN REPLACED BY THE PT8 MODEL WITH NEW FEATURES "

Product added to wishlist

This website uses proprietary and third-party cookies to improve our services and display advertising with our preferences through the analysis of our browsing habits. To give your consent when you press the Accept button.

Best sellers

Table of manoeuvres Beninca BRAINY for 1 or 2 actuators at 230 V

Niceway command 1 drive open-stop-close

Receiver card adapter connection 6 pins with output 4 pins

Casing or adapter Clemsa AD2000 for RFID readers CK40, CK42

Engine buried Nice L-Fab HS for rapid actuation of swing doors up to 4 m

Enclosure Erreka Stainless steel NHENC

Table of manoeuvres Nice OGA2N for SHEL75KCE sectional engine

BiMotor Forsa UNIKO R-60 2M Without electric brake for roller shutters up to 153 kg

Motor support Hydom ROTOR UNIC for revolving doors

Hydraulic motor Aprimatic LEVA50 intensive use for tilting doors up to 10m2/16m2

In the case of vehicles of categories M1 and N2 with a maximum mass not exceeding 2000 kg:

Engine Nice Slight with integrated central and absolute encoder for sliding doors up to...

Engine Novelforis for use in the manufacture of motor vehicles

NICE TOONA 5 engine for swing doors up to 5 m

Motor roof head BFT "TIZIANO' 600 N for sectional doors of up to 10 m2

Software engineer Nice O-Box multifunction with software for programming transmitters...

Receiver base + decoder Erreka for RFID proximity keys

Hexagonal curved axle 60 mm

Table of manoeuvres TMP WHAT'S UP

Vertical electric lock Nice PLA10 to 12V for swing doors

Kit to unlock from the outside with key V2 AZIMUTH

Table of manoeuvres V2 CITY5 for traffic light management

Table of manoeuvres DEA 200SR for revolving doors 230V

Software engineer Clemsa It's called MutanCODE PT7 for PC

Filter by

Categories

Price

Manufacturers

Home