Best sellers

Showing 1609-1632 of 2043 item(s)

Repeaters

Fixed code D555 controller duplicating machine

RMC888

€49.00

Fixed 433 MHz low frequency code duplicator compatible with D555 transmitters.

Electric motor kit EMFA ROT MEC at 230V for residential...

Electric motor kit EMFA ROT MEC at 230V for residential... 2

Overhead Door Motors

Electric motor kit EMFA ROT MEC at 230V for residential tilting doors up to 8m2

EMFA

KIT EMFA ROT MEC

€436.00

Electromechanical engine EMFA ROT MEC at 230V for residential tilting doors up to 8m2. Self-locking mechanism with built-in box-receiver 433 MHz to drive 1 or 2 sheet counterweighted tilting doors.

Barriers of passage

Electromechanical barrier Erreka ULTRA 230V heavy use

Erreka

KIT ULTRA

€1,441.00

230Vac electromechanical access barrier for residential, community and industrial accessup to 6 metres, equipped with anti-crush system and external running ends.

Electromechanical barrier 24 V CAME Gard GT8 heavy use...

Electromechanical barrier 24 V CAME Gard GT8 heavy use... 2

Barriers of passage

Electromechanical barrier 24 V CAME Gard GT8 heavy use aluminium mast 6350mm

CAME

KIT GT8

€2,025.00

Electromechanical barrier 24 V CAME Gard GT8 heavy duty with aluminium mast in white lacquer of 130x85 with a length of 6350 mm.

Roller Garage Door Motors

End of rolling motor race Clemsa AR2581

Clemsa

6020524

€60.00

Full race finish (box with electronics) for retractable motor Clemsa AR2581.

Rails & accessories for sectional doors

Guidance for the extension of 0.8m + motor chain Nice SPIDO600

Nice

SR08C

€59.00

Guidance for the extension of 0.8m + motor chain Nice SPIDO 600, PLEASE.

Tubular transmitters & accessories

I command Motorline 8 channel MX92 for household blinds

Motorline

MX92N

€48.00

I command Motorline 8 channel MX92N with household blind holder, programming of daily events, creation of two different groups, allows general opening and closing of engines.

Tubular transmitters & accessories

Niceway command drive open-stop-close

Nice

WM002G

€39.00

Module for the operation of 2 open-stop-close automatic systems in single or multi-group mode.

Batteries for Automation

Tarjeta para cuadros CAME ZL65 para fallo de suministro eléctrico y recargar de baterías

CAME

002RLB

€47.00

Tarjeta para cuadros CAME ZL65 para el funcionamiento en caso de falta de suministro eléctrico y para recargar las baterías.

Manufacture from materials of any heading

Safety photocells DEA 105 / N to embed 20 m

DEA SYSTEM

662012

The DEA 105 / no They are a couple of Photocells to embed, designed to provide security and discrete integration in automatic door installations, garages and residential or industrial accesses. Thanks to its recessed format, these photocells allow a more aesthetic and protected installation, being perfectly integrated into pillars, walls or access...

Door Keypads

Dea DIGIPRO keyboard, digital wired with proximity reader and built-in electronics

DEA SYSTEM

663310

Dea DIGIPRO keyboard, digital wired with proximity reader and built-in electronicswith dimensions of 76xh120x28mm.

Sliding Gate Motors

Engine Aprimatic Wave 724 to 24V for sliding doors up to 700 kg

Aprimatic

KT02724

€393.00

Engine Aprimatic Wave 724 to 24V for sliding doors up to 700 kg. What. Ideal for residential doors of intensive use. Operator at 24 Vcc for sliding doors up to 700 kg. Intensive use. It incorporates the maneuver board, with anti-crush system to reverse the maneuver in case of detection of obstacles. Personalized lock unlock in case of power failure.

Swing Gate Motors

Engine Aprimatic R223 irreversible electromechanical 230V for swing doors up to 2,5 m

Aprimatic

41036/001

€155.00

Engine Aprimatic R223 Irreversible electromechanical 230 Vac for swing doors up to 2.5 m and residential use. Built on a sturdy injected and anodized aluminum chassis for outdoor use.

Manufacture from materials of any heading

Pair of photocells CAME For the purposes of this Regulation, the following definitions...

CAME

001DELTA-E

€54.00

Pair of photocells CAME DELTA-E 12 - 24 V AC - DC surface, complete with box. Range 20 meters . " THIS MODEL HAS BEEN REPLACED BY THE NEW PHOTOCELL FOR THE PURPOSES OF THIS REGULATION, THE FOLLOWING DEFINITIONS SHALL APPLY: FULLY COMPATIBLE "

Manufacture from materials of any heading

Pair of photocells CAME DELTA-I for mounting of 12/24V

CAME

001DELTA-I

€51.00

Pair of photocells CAME DELTA-I for insertion of 12 - 24 V AC - DC, complete with box. Range , 20 meters . " THIS MODEL HAS BEEN REPLACED BY THE NEW PHOTOCELL FOR THE PURPOSES OF THIS REGULATION, THE FOLLOWING DEFINITIONS SHALL APPLY: FULLY COMPATIBLE "

Home

Table of manoeuvres DEA In the case of vehicles of categories M1 and N2

DEA SYSTEM

203RR

Table of manoeuvres DEA In the case of vehicles of categories M1 and N2 for 1 engine with clutch, slide or barrier. Anti-crush safety device, 433 MHz radio receiver, normal speed regulation and deceleration in opening and closing, force regulation with 70 separate opening and closing levels. PLATE "203RR" HAS BEEN DE-CATALOGED BY THE NEW ELECTRONIC PLATE...

KIT Hydraulic engine Aprimatic LEVA50 intensive use for...

KIT Hydraulic engine Aprimatic LEVA50 intensive use for... 2

Overhead Door Motors

KIT Hydraulic engine Aprimatic LEVA50 intensive use for tilting doors up to 10m2/16m2...

Aprimatic

KIT LEVA50 SAXO

€795.00

Hydraulic motor Aprimatic LEVA50 intensive use for use in the manufacture of motor vehicles up to 10m2 and MAXILEVA50 for doors up to 16m2. Hydraulic operator for one- or two-bladed counterweighted swing doors. Torque control valves incorporated. Hydraulic deceleration at the end of the journey. Intensive use. Hollow shaft.

Swing Gate Motors

KIT Hydraulic engine Aprimatic FORTY 270/390 intensive use for swinging canopies of 6/7...

Aprimatic

KIT FORTY 270/390

€592.00

Hydraulic motor Aprimatic model FORTY 270 for one- or two-bladed heavy-duty canisters, in the 270mm and 390mm version.

Shaft-drive motors

Engine Motorline Axle traction KVM110 for sectional doors up to 48m2

Motorline

KVM110

€510.00

Engine Motorline KVM110 is a drive shaft automatic, for automation of industrial sectional doors up to 48m2, with the possibility of horizontal or vertical application. The ease of installation, configuration and maintenance makes it ideal for all types of sectional doors.

Copying commands

The vehicle shall be equipped with:

Detumando

DTM-MV

€29.75

Distance control DTM-2 at frequency 433.92 MHz for duplication of fixed-code commands such as binaries and trinaries. * Special prices for professionals. Contact us to open your file.

Security sensor Motorline RAP5M-PRO for automatically...

Security sensor Motorline RAP5M-PRO for automatically... 2

Radar and sensor glass door

Security sensor Motorline RAP5M-PRO for automatically slamming pedestrian doors with 6...

Motorline

RAP5M-PRO

€236.00

Security sensor Motorline RAP5M-PRO for automatically sliding pedestrian doors with 6 detection pointsn and installation up to 2.6 m high.

Receptors

Receiver V2 WALLY2 bi-channel 230V at 433 and 868 MHz

WALLY2-230

€76.00

Receiver V2 WALLY2 bi-channel 230V with capacity for 240 users and with load control capability up to 1500W. Version at 433 MHz and 868 MHz.

Control Panels

Manoeuvre chart Erreka CLEVER03 for sliding doors and analogue swingers 230V

Erreka

CLEVER03

€117.00

Manoeuvre chart Erreka CLEVER03 for sliding and tilting doors analog 230Vac with soft stop option and end of run.

Swing Gate Motors

Hydraulic motor V2 URSUS 230V for heavy duty swing doors up to 4/6m

URSUS

€522.00

Hydraulic motor V2 URSUS 230V for heavy duty swing doors, sheets up to 4 or 6 meters long designed to power canopies of community garages.

Product added to wishlist

This website uses proprietary and third-party cookies to improve our services and display advertising with our preferences through the analysis of our browsing habits. To give your consent when you press the Accept button.

Best sellers

Fixed code D555 controller duplicating machine

Electric motor kit EMFA ROT MEC at 230V for residential tilting doors up to 8m2

Electromechanical barrier Erreka ULTRA 230V heavy use

Electromechanical barrier 24 V CAME Gard GT8 heavy use aluminium mast 6350mm

End of rolling motor race Clemsa AR2581

Guidance for the extension of 0.8m + motor chain Nice SPIDO600

I command Motorline 8 channel MX92 for household blinds

Niceway command drive open-stop-close

Tarjeta para cuadros CAME ZL65 para fallo de suministro eléctrico y recargar de baterías

Safety photocells DEA 105 / N to embed 20 m

Dea DIGIPRO keyboard, digital wired with proximity reader and built-in electronics

Engine Aprimatic Wave 724 to 24V for sliding doors up to 700 kg

Engine Aprimatic R223 irreversible electromechanical 230V for swing doors up to 2,5 m

Pair of photocells CAME For the purposes of this Regulation, the following definitions...

Pair of photocells CAME DELTA-I for mounting of 12/24V

Table of manoeuvres DEA In the case of vehicles of categories M1 and N2

KIT Hydraulic engine Aprimatic LEVA50 intensive use for tilting doors up to 10m2/16m2...

KIT Hydraulic engine Aprimatic FORTY 270/390 intensive use for swinging canopies of 6/7...

Engine Motorline Axle traction KVM110 for sectional doors up to 48m2

The vehicle shall be equipped with:

Security sensor Motorline RAP5M-PRO for automatically slamming pedestrian doors with 6...

Receiver V2 WALLY2 bi-channel 230V at 433 and 868 MHz

Manoeuvre chart Erreka CLEVER03 for sliding doors and analogue swingers 230V

Hydraulic motor V2 URSUS 230V for heavy duty swing doors up to 4/6m

Filter by

Categories

Price

Manufacturers

Home