843,37 €
THE KIT Electromechanical engine Erreka ORION 230Vac for swing doors for use in the manufacture of products falling within heading 8528 [1] encode or end run. What. Can be used with inside opening or outside opening.

We ship your order within 24/72 hours

Secure payment: Card, Bank transfer, Bizum

Fast shipping from Spain
THE KIT Electromechanical engine Erreka ORION 230Vac for swing doors for use in the manufacture of products falling within heading 8528 [1] encode or end run. What. Can be used with inside opening or outside opening.
All the accessories necessary for a new installation are included but the opening of the door must be taken into account, if the lower leaf opens towards the internal or external.
CHARACTERISTICS
- Safety with obstacle detection/anti-crush system in models with Encoder
- Electromechanical encoder or end run
- Sliding sliding doors for two- or four-wheel drive vehicles
- Locking system
- Autographed tour
KT2010F IS
- KT2010F: Electromechanical motor with encoder, 220 Nm, locked
- EPE-B09: Analogue manoeuvre chart for one 230Vac engine
- N1100-001 OTHERThe guide
- N1100: Arm opening inside or outside
- IRE2Receiver card 433.92 MHz
- OF WHICH:: fixed code command 433.92 MHz (2 units)
- FT06For the purposes of this Regulation:
KT2000CF EQUIPMENT
- KT2000CF: Electromechanical motor with running end, 220 Nm, locked
- LIVE-M101: Analogue manoeuvre chart for one 230Vac engine
- N1100-001 OTHERThe guide
- N1100: Arm opening inside or outside
- IRE2Receiver card 433.92 MHz
- OF WHICH:: fixed code command 433.92 MHz (2 units)
- FT06For the purposes of this Regulation:
THE FOLLOWING PARAGRAPH IS ADDED:
- KT2050F: Electromechanical motor with encoder, 500 Nm, locked
- EPE-B09: Analogue manoeuvre chart for one 230Vac engine
- N1500-001 ANDThe guide
- N1500: Arm opening inside or outside
- IRE2Receiver card 433.92 MHz
- OF WHICH:: fixed code command 433.92 MHz (2 units)
- FT06For the purposes of this Regulation:
THE FOLLOWING PARAGRAPH IS ADDED:
- OTHER VEHICLES: Electromechanical motor with end of stroke, 500 Nm, locked
- LIVE-M101: Analogue manoeuvre chart for one 230Vac engine
- N1500-001 ANDThe guide
- N1500: Arm opening inside or outside
- IRE2Receiver card 433.92 MHz
- OF WHICH:: fixed code command 433.92 MHz (2 units)
- FT06For the purposes of this Regulation:
MANUALS
You might also like
Lamps and lighting fittings Erreka LUMI multi voltage with antenna 433 MHz
10 metres of stranded cable Erreka ORION (3 threads of 0,25 mm2 + mesh)
Shipping 24/72h
Fast shipping
from Spain
Quality at the best price
We have the best brands
in garage automation systems
Secure payment
Bank transfer, credit/debit card, Bizum
Technical support
We advise you before and after
to place your order