KIT Hydraulic operators Aprimatic FORTY 4 for swing bars of two leaves for residential use.

Built-in anti-crush safety valves. Quick emergency release. Useful length of stem 270 mm. Stem diameter is 18 mm.

KIT Hydraulic operator Aprimatic FORTY 4 for swing bars of a leaf for residential use.

Built-in anti-crush safety valves. Quick emergency release. Useful length of stem 270 mm. Stem diameter is 18 mm.

Hydraulic operator Aprimatic FORTY 4 for swing bars one or two leaves, residential use.

Built-in anti-crush safety valves. Quick emergency release. Useful length of stem 270 mm. Stem diameter is 18 mm.

Electromechanical engine BFT BOTTICELLI SMART BT A for intensive or very intensive use, designed to automate sectional garage doors.

It has a very compact design, suitable for installation anywhere, thanks to the wide range of chain rails available in various lengths.

The control centre and the end of run with encoder and mechanical cap are incorporated, respectively, on the operator and the guide.

With the Lineal Low engine, it's no longer a problem to power a community door. With our reader system angle the automatism recognizes the position and function to be performed.

The Lineal Low incorporates an angle reader (encoding) which allows us to have no quotas in the case of vehicles with a maximum design speed exceeding 50 km/h, the maximum design speed shall not exceed 50 km/h.

24 V motor DEA model TEO 700 of 1000N, designed to drive other, of circular cross-section. What. It is the manufacturer's cheap and easy to install solution DEA.

Engine FAAC model C721 with 24V operation for light residential and communal sliding doors of up to 800 kg.

Electromechanical gearbox engine 24 Vdc Nice TITAN HS with magnetic encoder for use in the manufacture of motor vehicles up to 3,7 m (TTN3724HS, TTN3724RHS), and for sheets of up to 6 m (TTN6024HRS, TTN6024HRS) AND.

Engine Clemsa AA40 electromechanical 230V for one-bladed swing doors for a maximum length of 4m per leaf. What. The AA40 model is ideal for automating residential doors for non-intensive use.

Engine Clemsa AA30 electromechanical 230V for one-bladed swing doors for a maximum length of 3m by sheet. What. The AA30 model is ideal for automating residential doors for non-intensive use.

Electromechanical engine Clemsa AA400 for swing doors up to 4 metres in length by leaf, designed for motorized residential use door. What. The model "AA400 424 B" allows us to perform a semi-intensive use motorization.

Electromechanical engine Clemsa TO 300 for folding doors up to 3 metres in length per sheet, of semi-intensive residential use. 

KIT's engine Clemsa AA30 electromechanical 230V for one-bladed swing doors for a maximum length of 3m by sheet. What. The AA30 model is ideal for automating residential doors for non-intensive use.

Electromechanical engine Nice Toona HS, 24Vdc with magnetic encoder for rapid actuation of swing doors with blades up to 5 metres or 400 kg (TO5024HS) and up to 6 metres or 1,450 kg (TO6024HS). The installation of this motor is ideal for residential or community doors of intensive use.

KIT Motor for sliding door Erreka PUMA INVERTER, at 230Vac for residential use up to 400 kg, with magnetic end run and obstacle detection.

KIT electric motor for residential use, BFT model"PHEBE BT A U C" for automating swing doors of up to 8m2.

Electromechanical operator for residential use to automate tilting garage doors.

The integrated control centre, allows the operation of a second engine for large doors or with an integrated pedestrian door. For tilting doors up to 10m2 with installation of two motors.

In addition, microprocessor technology allows the torque of the motors to be controlled with maximum precision and complete safety.

KIT engine DEIMOS BT A400, operator for sliding doors of up to 400 kg. What. Blade speed is 12 m/min. End of the electromechanical race.

Electromechanical drive Erreka ZETA of 24 Vdc for residential sectional doors For the purposes of this Regulation, the following definitions shall apply:

Electromechanical drive Erreka ZETA of 24 Vdc for residential sectional doors For the purposes of this Regulation, the following definitions shall apply:

Engine Erreka Sirius electromechanical 230Vac and 400Vac by chain transmission for hinged doors up to 50 m2.

Recommended installation in community and industrial doors.

Engine Erreka Sirius electromechanical 230Vac and 400Vac by chain transmission for hinged doors up to 50 m2.

Recommended installation in community and industrial doors.

KIT 24V engine DEA model TEO 700 of 1000N, designed to drive other, of circular cross-section. What. It is the manufacturer's cheap and easy to install solution DEA.

KIT Sectional engine Pujol for sectional doors up to 10 m² /60Kg (STC-600) or doors up to 15m² /100Kg (STC-1000) is used. It has a chain-driven traction rail, soft stop, automatic closure and automatic obstacle detection.

KIT Hydraulic motors HYDOM 4LR Semi-intensive for swinging doors residential use up to 3.5 metres per sheet. What. The actuators are powered at 230V and have 250mm stroke, hydraulic damping in opening and closing, available version without lock and with double lock.

KIT Hydraulic motor HYDOM 4LR Semi-intensive for swinging doors residential use up to 3,5 metres per blade. What. The actuators are powered at 230V and have 250mm stroke, hydraulic damping in opening and closing, available version without lock and with double lock.

Motor for sliding doors Hy-Dom for heavy duty at 230v. What. It incorporates an angle reader (encoder) and an anti-crushing system at opening and closing, a manual assistance manoeuvre activation system, and detection in case of untimely closure of the door by a gust of wind.

Motor centre axle ACM for use in the manufacture of products falling within heading 8528, ideal for powering commercial doors or private garages.

Do not allow the engine to lock when the door is stopped or left closed, if there is no electricity, you can climb by hand. It is recommended to use in places where there is NO alternative access to the shop/garage or an external brake unlocker cannot be installed, as when there is no electric current it can be operated manually.

Motor centre axle ACM of a kind used in motor vehicles, ideal for powering commercial doors or private garages.

The electro-brake brakes the blind once it's closed and avoiding opening it manually. The motor includes the auto brake unlock (black cable), to be able to activate the blind in case of lack of electric current in the room or garage.

Motor gearbox Forsa BOXER 230Vac up to 1000 kg oil bath for sliding doors of heavy use.

The electromechanical actuator Erreka ARES is designed to drive automatic doors for use in the manufacture of motor vehicles.

Easy installation with two stem sizes (300mm and 400mm race), economic range, with obstacle detection and electronic soft shutdown.

The electromechanical actuator Erreka ARES is designed to drive automatic doors for use in the manufacture of motor vehicles.

Easy installation with two stem sizes (300mm and 400mm race), economic range, with obstacle detection and electronic soft shutdown.

I'm going to go with the P-1. Designed for revolving doors up to 235 kg weight. What. Suitable for automating locks with side drive and gearbox.

Integrated electronic equipment that allows opening by key, button or remote control. Manual operation by crank.

KIT engine Motorline SLIDE1024 to 24V with oil and grease lubricated reducer for sliding doors up to 1,000kg heavy duty and IP44 protection.

KIT engine Motorline SLIDE800A at 230V with oil and grease lubricated reducer for sliding doors up to 800kg semi-intensive use and IP44 protection.

Roof motor Motorline ROSSO EVO 1200N for sectional doors up to 18m2. What. It has a modern and innovative design, standing out in any environment.

Roof motor Motorline ROSSO EVO 1000N for sectional doors up to 15m2. What. It has a modern and innovative design, standing out in any environment.

Roof motor Motorline ROSSO EVO 600N for sectional doors up to 10m2. What. It has a modern and innovative design, standing out in any environment.

Electromechanical engine Forsa SATURN at 24 V for residential sliding doors up to 1500 kg

Electromechanical engine Forsa SATURN at 230 V for residential sliding doors up to 1000 kg

Motor for residential sliding doors (version 230V), or semi-intensive use (version of 24 V). 400, 600 or 800 kg version.

Motor kit CAME BXV06AGS at 24V for sliding doors up to 600 kg both residential and communal.

Roof motor Erreka NAOS for sectional garage doors up to 11m2 24Vdc with encoder capable of lifting up to 70 kg. What. Includes receiver for up to 20 codes.

Engine FAAC model C720 with 24V operation for light residential and communal sliding doors of up to 400 kg.

KIT Motor NICE model SPINKIT 650N for sectional doors up to 8,8m2 and tilting doors up to 9,8m2. What. Leash traction.

The version in KIT comes with pre-assembled guide of 3m SPIN11KCE.

THE NICE SPIN ENGINE HAS BEEN REPLACED BY THE NEW MODEL NICE SPIDO600 WITH IMPROVEMENTS OVER THIS MODEL

Manufacture from materials of any heading Nice TOO3000 and TOO4500 230 V electromechanical switchgearblades up to 3 m and 300 kg (TOO3000 model) and up to 4,5 m and 250 kg (TOO4500 model).

Motor for rapid actuation (HS technology) for swing doors with blades up to 3 m or 270 kg. Electromechanical gearbox with articulated arm, external mounting, 24 Vdc, with magnetic encoder. Ideal for residential applications also in the presence of large columns. Ideal for heavy use and fast manoeuvres: opening to 90o in approximately 10 seconds.

For the purposes of this Regulation, the following definitions apply: compatible with all brands on the market ACM & WHISTLE.

KIT engine Motorline BRAVO524 at 24Vdc with oil and grease lubricated reducer for sliding doors up to 500kg and IP44 protection.