KIT Sliding engine Clemsa "AC862N" electromechanical 230 V for residential doors up to 800 kg. It incorporates a manoeuvre chart CLAS62C. The actuator has magnetic running ends, levered unlock system, aluminum body painted with polyester powders and ABS crankcase. in addition, thanks to its anti-crush system and smooth stopping we will have an engine with reliability and maximum precision.

OXYGEN EOS200EB center axle winding motor for Persiana Winding up to 180KG.

The lifting capacity is up to 180 KG and is designed for 48/60mm axles and 200/220mm pulleys.

Sliding engine Clemsa "AC562N" electromechanical 230 V for residential doors up to 500 kg. It incorporates a manoeuvre chart CLAS62C. The actuator has magnetic running ends, levered unlock system, aluminum body painted with polyester powders and ABS crankcase. in addition, thanks to its anti-crush system and smooth stopping we will have an engine with reliability and maximum precision.

Sliding engine Nice It shall be capable of operating at a voltage not exceeding 300 V for residential cancellations up to 600 kg. It incorporates a control panel with self-programming route and receiver 433 MHz compatible with transmitters Nice ONE.

The gearbox Nice ROBO600 incorporates mechanical race finishes in opening and closing.

KIT Sliding engine Nice It shall be capable of operating at a voltage not exceeding 300 V for residential cancellations up to 600 kg. It incorporates a control panel with self-programming route and receiver 433 MHz compatible with transmitters Nice INTI2.

The gearbox Nice ROBO600 incorporates mechanical race finishes in opening and closing.

KIT Sliding engine Beninca "BULL5M' 230V for residential use up to 500 KG with built-in receiver. What. Possibility to optionally add Encoder and Magnetic Race Ends.

Engine Beninca "YAK25 OTI' 230V for heavy industrial doors up to 2500 kg, with oil bath gearbox. What. Central with virtual encoder and inverter technology.

KIT engine Beninca "BULL624ESA' 24V for Community heavy duty sliding doors up to 600 kg. What. It incorporates central with receiver, encoder and custom unlock key.

Sliding engine Beninca "BULL10M' 230V for lamps for Community use up to 1000 KG. What. It incorporates central with receiver, encoder and custom unlock key. Available model "BULL10M.S" with magnetic running ends.

KIT Electromechanical engines Beninca "BOB30' for residential sliding doors up to 3 m per sheet.

Reliable gearbox, quiet and quick to install, thanks to the 2 mechanical stoppers adjustable in opening and closing. Available in 230 Vc and 24 Vdc versions.

Sliding engine BFT "DEIMOS AC' electro-mechanical 230Vac for residential households up to 600/800 KG with electro-mechanical end of run.

The "DEIMOS AC" operators are ideal for motorizing residential doors with a speed of 9 m/min, they are easy to install thanks to their programming by trimmer and DIP switch. The end of the race is electromechanical.

KIT Sliding engine BFT "DEIMOS AC' electro-mechanical 230Vac for residential households up to 600/800 KG with electro-mechanical end of run.

The "DEIMOS AC" operators are ideal for motorizing residential doors with a speed of 9 m/min, they are easy to install thanks to their programming by trimmer and DIP switch. The end of the race is electromechanical.

Sliding engine BFT "DEIMOS ULTRA BT A" 24V electromechanical for charges of up to 400/600 KG with intensive use and magnetic run ends.

KIT Sliding engine BFT "DEIMOS ULTRA BT A" 24V electromechanical for charges of up to 400/600 KG with intensive use and magnetic run ends.

KIT Electromechanical engines BFT "ATHOS AC A" Irreversible 230V for residential swivels up to 700 kg in weight and 4 metres in length.

High speed motor BFT "ICARO VELOCE SMART AC A' 230V for sliding doors of very heavy use up to 1000 and 2000 kg.

Engine CAME BKV 36Vdc for heavy sliding doors of 1,500/2,000/2,500 KG with heavy use.

KIT Center axle winding motor OXYGEN EOS200EB and box-receiver URANIA 433 MHz Persian Winding up to 180KG.

The lifting capacity is up to 180 KG and is designed for 48/60mm axles and 200/220mm pulleys.

Range of buried operators BFT SUB for residential and community cancellations.

Motor head EMFA MTCH of 800N and 1,000N with built-in receiver box for residential sectional doors.

KIT Motor Came BK-1800 from 230V for sliding doors of up to 1,800 kg and up to 20 metres in length. What. It incorporates electronic card with programming display, built-in radio decoding and mechanical race endings.

Other, of circular cross-section V2 AGON for revolving doors with axle 60 and up to 280 kg with electro-brake. What. Motor for spring-loaded industrial revolving doors, axle 60 mm in diameter, lifting capacity up to 280 kg and crown 200/220.

KIT 24Vdc electric motor Erreka String draw for use in the manufacture of motor vehicles up to 35m2, for residential, community and industrial use.

Includes maneuver chart VIVO-D103 (analogue for one 24 Vdc engine).

Engine V2 Electromechanical JEDI 24 V irreversible for sectional and tilting doors up to 15 m2 with a starting force of 1000 N (100 kg).

" THE JEDI MODEL HAS BEEN DISCONTINUED AND REPLACED BY THE MODEL ATRIS "

The Sprint Low is a 24V electromechanical motor that includes a gearbox and receiver for 255 emitters. What. For residential or communal sliding doors.
It is manufactured with the highest quality products and is undoubtedly the fastest automation on the market in its placement in sliding doors as it lacks exact quotas, and thanks to its pivot pin , it always fits the zipper.

KIT engine V2 Electromechanical JEDI 24 V irreversible for sectional and tilting doors up to 15 m2 with a starting force of 1000 N (100 kg).

" THE JEDI MODEL HAS BEEN DISCONTINUED AND REPLACED BY THE MODEL KIT ATRIS "

Hydraulic motor for tilting doors one or two-bladed counterweights with a not more than 14 m2, for residential, community or industrial use.

Hydraulic motor for tilting doors one or two-bladed counterweights with a not more than 14 m2, for residential, community or industrial use.

Hydraulic operator Forsa HALF TANK for sliding doors of Community use for leaves up to a maximum length of 7 metres.

Electromechanical motor of 24 V DC Erreka String draw for use in the manufacture of motor vehicles up to 35m2, for residential, community and industrial use.

Engine FAAC 412 electromechanical 230 V for hinged doors up to 6 feet, ideal for residential use.

Engine Nice RUN HS for the rapid actuation of switches for use in the manufacture of motor vehicles 1.200kg.

Rapid opening and closing maneuvers: RUN400HS opens a 4 m canopy in approximately 6* seconds, while RUN1200HS opens a 7 m canopy in approximately 18* seconds.

Hydraulic motor Forsa FULL TANK for community or industrial use sliding doors for sheet metal maximum length of 7 metres the weight of the product.

Engine DEA LIVI in the 230V version for sliding doors for residential use of 400kg, 600kg, 800kg and 900kg.

Electromechanical motor of 24 V Nice TOONA7 of a kind used in motor vehicles intensive use up to 7 metres of leaf.

Externally mounted electromechanical gearbox, powered at 24 Vdc, with magnetic encoder.

Engine DEA REV in 230V and 24V version for sliding doors of community use up to 1400 kg.

The REV series engines are equipped with a 433 MHz integrated receiver gearbox and electromechanical or magnetic terminals.

Non-reversible electromechanical motor Nice TUB 400Vac for sliding doors industrial use up to 4000 kg.

Engine DEA GULLIVER for use in the manufacture of motor vehicles machinery for making pulp of fibrous cellulosic material.

KIT Integrated Electromechanical Motor Erreka MAGIC for smooth doors designed for domestic or industrial cancellations up to 2.5 meters by leaf.

Pensed for all types of residential doors both iron and aluminum.

" The manufacturer Erreka has decatalogued this product "

KIT Integrated Electromechanical Motor Erreka MAGIC for smooth doors designed for domestic or industrial cancellations up to 3.5 meters by leaf.

Pensed for all types of residential doors both iron and aluminum.

" The manufacturer Erreka has decatalogued this product "

Electromechanical engine DEA "LIVI 902' 230V or 24V for semi-intensive residential swing doors up to 9m2.

The 'LIVI 902' version does not incorporate a manoeuvre chart and the 'LIVI 905' version incorporates a digital manoeuvre chart. The engine travel is done by Encoder but optionally you can acquire the end of race system.

KIT engine DEIMOS BT A400, operator for sliding doors of up to 400 kg. What. Blade speed is 12 m/min. End of the electromechanical race.

KIT electric motor for residential use, BFT model"PHEBE BT A U C" for automating swing doors of up to 8m2.

Electromechanical operator for residential use to automate tilting garage doors.

The integrated control centre, allows the operation of a second engine for large doors or with an integrated pedestrian door. For tilting doors up to 10m2 with installation of two motors.

In addition, microprocessor technology allows the torque of the motors to be controlled with maximum precision and complete safety.

Hydraulic operator Aprimatic FORTY 4 for swing bars one or two leaves, residential use.

Built-in anti-crush safety valves. Quick emergency release. Useful length of stem 270 mm. Stem diameter is 18 mm.

KIT Hydraulic operator Aprimatic FORTY 4 for swing bars of a leaf for residential use.

Built-in anti-crush safety valves. Quick emergency release. Useful length of stem 270 mm. Stem diameter is 18 mm.

KIT Hydraulic operators Aprimatic FORTY 4 for swing bars of two leaves for residential use.

Built-in anti-crush safety valves. Quick emergency release. Useful length of stem 270 mm. Stem diameter is 18 mm.

Hydraulic operator Aprimatic TWENTY 270 for swinging canes one or two leaves, semi-intensive use. Speed deceleration closing. Built-in anti-crush safety valves. Quick emergency release. Useful length of stem 270 mm. Stem diameter is 16 mm.

Hydraulic operator Aprimatic TWENTY 270 for swinging canes one or two leaves, semi-intensive use. Speed deceleration closing. Built-in anti-crush safety valves. Quick emergency release. Useful length of stem 270 mm. Stem diameter is 16 mm.