Motor chain drive DEA LATO for industrial sectional doors up to 35m2. What. Model in 230V and 400V version with manual or chain unlocking system.

Infrared sensor FAAC XPB-ON presence and movement, with active infrared technology with background suppression.

The photocells FAAC MINISWITCH GLS function as safety aids. What. For its correct use, standard EN16005 should be taken as a reference in those countries where it is in force.

KIT Electromechanical engine 230Vac Erreka RINO for sliding doors, with built-in panel, ideal for installation in residential, community or industrial doors.

Adjustable forks for automatic barriers Aprimatic.

Unlocking pill Nice ROAD400 with two metal keys.

Control panel Clemsa CLAS25 for 24V tilting and sliding actuators. What. Maximum operating power 150W. Programming by pulse.

Electromechanical engine Erreka HIPPO three-phase 230Vac and 400Vac for community and industrial sliding doors up to 4000 kg.

Electric lock voltage reducer from 24V to 12V.

BOOSTER PC170/190 is a voltage reducer for electric lock to 12V in frames with 24V output.

Surface keyboard CAME SELT1W8G wireless via radio 868,35 MHz, with 12 buttons with backlight it's blue. Capacity for 25 memorable codes and programming access password. Configurable in Rolling Code or Fixed Code mode. The gray colour RAL7024.

Support or mounting plate Medva CS HOME with anchor bolt.

Table of manoeuvres CAME 2ZE5 for tilting engine E456.

KIT Electromechanical engines DITEC PWR25H 24V for two heavy duty swing doors with a leaf length of up to 3.5 metres.

The irreversible actuator DITEC The 24Vcc PWR35H is intended for frequent and heavy use. With machinery for making pulp of fibrous cellulosic material.

Table of manoeuvres DITEC LCU30H for 1 or 2 motors at 24 Vdc with display programming.

The boards of the Ditec LCU series make it possible to easily configure, by means of the display, the operating modes and to control at all times the position and speed of the, allowing regulation of acceleration, deceleration and start time, deceleration space and approach speed in opening and closing. Thanks to the additional plug-in cards it is possible to further expand the functionalities of the facility with self-controlled security bolts, magnetic loop detector, Bluetooth module.

Unlocking lock FAAC with a custom key.

Telescopic harnesses and torsion bars Forsa I MEAN, ERG.

The engines of Motorline KVM205, KVM210 and KVM215 are three-phase three-axle traction motors powered at 230 V. With electronic end, for the automation of industrial sectional doors from 20m2 to 60m2, with possibility of horizontal or vertical application.

With a frequency converter system built into the power station, it enables smoother starts and stops and provides benefits such as: energy savings, process improvement and reduced mechanical maintenance.

Engine Motorline MCBS80 designed to execute opening and closing of tilting windows, blinds and skylights.

KIT Engines buried Motorline "SUBWING' to automate swings up to 2.5 metres.

SUBWING has been developed to automate beating gates with blades up to 2.5m, available in 230Vac, or 24Vdc.

Discreet, it's buried beneath the base of the sheet, making it virtually invisible, without altering the appearance of the gate.

The construction of the outer case in galvanized steel provides great robustness and strength. With the possibility of applying mechanical caps on the automatic to limit opening and closing.

Tube motor FAAC "TM2 45 AND" 45 for domestic rolling shutters with an electronic running end for use wired by a wall switch.

Universal PUJOL micro receiver wired for 31 users RollingCode 433.92 MHz.

The power supply of this receiver is at 12/24 Va/Dc, 1-channel mono-stable.

Card battery system CAME for electricity supply in the event of a power failure. What. Compatible with sliding motors CAME BKV.

The system allows us to automatically recharge batteries. It does not include the batteries but you can use the universal ones regardless of their maximum capacity.

KIT Operator FORSA NEPTIS 120 Brushless to automate pedestrian swinging doors. What. With an internal opening guide and a digital function selector.

NEPTIS operators are designed to drive residential pedestrian beating doors such as private homes, offices, commercial premises, etc., as well as community doors such as lobbies or building doors to neighborhood communities.

NEPTIS is designed for doors of large dimensions and/or weight, as well as doors for public, community, commercial or emergency use.

Sliding engine EMFA HULK "High Speed" and Brushless technology 48V heavy use, doors up to 1800 KG. It incorporates a manoeuvre display and a 433 MHz receiver.

The SUPER HULK version uses Brushless technology but its speed is standard, in turn allows us to power doors up to 2500 kg.

HULK is the new range of engines developed by EMFA-MAP with a high-performance 48Vdc Brushless technology, for heavy use and heavy doors. What. Under a single aesthetic, the firm has developed two different versions for sliding doors up to 1800 & 2500 kg.

The HULK industrial models have been designed to operate doors of an industrial type and for heavy use. What. They have pinon in M4 steel, although there is an option to apply a larger M6 pinion.

HYDOM lathe of 1.4 m for the MINIMAX and ROTOR-UNIC engines.

Electromechanical barrier EMFA "B-PARK" 24V heavy duty with 4 or 6 meter mast.

Solar power system Motorline IT'S APOLLO.

Apollo is a solar power system that allows through sunlight, increase the charge of the batterya, thereby optimizing the efficiency and autonomy of automation. It's the solution ideal for remote gates to a fixed power grid and to simplify the installation, when it is impossible to pass electrical wires.

Sliding engine unlock assembly DMIL TIFON 8 EVO.

The spare is made up of a knob, a bottle and a key.

Control centre Motorline MC60KVM with output for electro lock EF25.

Medva PC190 control panel for 1 or 2 24V to 160W engines, with digital display, connected for 24V electric lock, encoder and force regulation and soft stop.

The vehicle shall be equipped with an automatic transmissionfor the operation of industrial sectional doors, sliding or tilting doors with 230 V Triphase motors.

Garage crew FAAC TM2868DS binary at 868 MHz.

The encoding of this emitter is done by a combination of 12 dip switches.

Electronic plate Medva QRF H4 24Vdc for 24V sliding motors with emergency battery connection terminals. It has: incorporated receiver RollingCode 433,92 MHz.

Unlocking knob BFT ICARO SMART AC with light bulb and 2 keys.

This version is mainly used with the ICARO SMART AC A engine.

Electronic plate BFT SCHEDA VENERE ARGO G. THIS IS THE FIRST TIME.

Motor DMIL RAYO 1 electro-mechanical 230V with running end and encoder, for residential swing doors up to 9m2, the manoeuvre chart (DEVELOPMENT) built-in analogue and emitter compatible receiver Forsa 868 MHz.

The RAYO 1 EVO engine can be installed in 1 or 2 hinged doors.

Portable programming device with ROLLER CODE and EVO CODE.

• In the case of the IRPROGM handheld programming device
• A portable programming device that allows you to program memories and emitters roller code and evo code and quickly enable a new user.
• All this thanks to the possibility of automatically generating a series of correlation codes and downloading them to the receiver.

Electronic plate CAME 3199ZLJ14 for controlling 24Vdc actuators compatible with the AXO, FROG, FERNI, FAST engines.

Parts and accessories of machinery CAME 119RIR509 ZL60 ZL65 BXV06

NICE SPWA20 electronic plate for barriers WIL4 and WIL6

Control panel with built-in electronic board Pujol P1 II single phase 230 V.

Electromechanical 230 V articulated arm motor Clemsa "AA 7002 B' with lock for residential overhangs up to 3 m per sheet.

Key unlocked Oxygen SARGON

KIT Sliding engine Clemsa "AC862N" electromechanical 230 V for residential doors up to 800 kg. It incorporates a manoeuvre chart CLAS62C. The actuator has magnetic running ends, levered unlock system, aluminum body painted with polyester powders and ABS crankcase. in addition, thanks to its anti-crush system and smooth stopping we will have an engine with reliability and maximum precision.

In the case of vehicles of categories M1 and N2 with a maximum mass not exceeding 2000 kg:

KIT CA HOME kit of two trailing hoods MEDVA HOME to weld on bars.

Product discontinued by the manufacturer. Not available for sale.

This model has been officially replaced by a more current version, which incorporates technical and functional improvements.

👉 Recommended substitute product:

Transmitter Nice Domip6SV for domestic blinds and awnings

Group auxiliary contacts to verify mast position CAME Gard GT4.