Blister of the brand GP. What. This is a 3V CR2450 lithium battery.

Blister of the brand GP. What. This is a 3V CR1220 lithium battery.

Outer receiver CAME model RKLT-50 for powering electromechanical end-of-course blinds, awnings and curtains up to 50 Nw.

" This model has been replaced by the RKLT-120 with higher benefits "

KIT Solemyo is the solar power system for automation systems for garage doors and access barriers mounted even away from the electricity grid.

Adjustable support for vibrating motor Erreka model VULCAN and VULCAN D.

KIT Electromechanical engine Erreka CALYPSO CA53 of 230Vac to automate residential doors of a sheet up to 3m and 300KG.

The Kit features a VIVO-M101 maneuver box for a 230Vac drive, receiver card, KUMA handles and safety photocells.

Hydraulic motor Erreka 230Vac ATLAS for residential or community intensive use for doors up to 15 m2 with an obstacle detection system. Available in reversible or irreversible versions and with anti-lock system.

Engine Nice WINGO HS electromechanical for rapid actuation sliding doors with blades up to 3 metres or 200 kg. Ideal for automating residential folding doors.

Central Motorline model MC41SP, 24Vdc for racing motors with end-of-run, automatic shut-off, speed reduction on opening and closing, built-in receiver with memory for 30 codes.

" This model has been replaced by the MC60SC "

Electronic switchboard Motorline MC50SC single-phase 230Vac sliding door, with built-in receiver, possibility to store in memory 99 Rolling Code total opening codes plus 99 pedestrian opening codes.

" THIS PRODUCT HAS BEEN REPLACED BY THE PLATE MC50 "

Receiver AERF "SRM 1L4255" for outdoor use 12/24V with 2 channels, rolling code 433.92 MHz.

Motor gearbox V2 alfariss irreversible electromechanical model with 24V for sliding doors up to 300 kg in weight. With obstacle detection, encoder, steel pinion and precise magnetic race ends.

* THIS ENGINE HAS BEEN REPLACED BY THE MODEL TORQ OF 24V UP TO 500 KG *

Motor gearbox Forsa BOXER 230Vac up to 1000 kg oil bath for sliding doors of heavy use.

2 channel remote control Somfy model Keytis 2 RTS for garage doors and frequency cancellation Rollingcode 433,92 MHz.

4 channel remote control Somfy model Keygo RTS for garage doors and frequency cancellation Rollingcode 433,92 MHz.

Electromechanical drive Erreka ZETA of 24 Vdc for residential sectional doors For the purposes of this Regulation, the following definitions shall apply:

The radio system simplifies even complex installations, eliminating the need for wiring between the safety band and the automatic control panel.

ANDthe radio system consists of a receiver XR S 868, communicating with an emitter XT S 868, to which one or two 8,2 Kohm resistive safety bands or auxiliary devices may be connected.

" The safety belts on the product accessories are fully compatible "

Emergency battery kits Clemsa and FAAC to manoeuvre in the event of a power failure.

The maximum manoeuvres shall depend on the state of charge of the batteries and the consumption of the automatic system.

Plug-in traffic light card with standard connector a width of not more than 50 mm AERF (including Hydom, DEA, Medva, among others).

Motor gearbox Aprimatic Wave 400 to 230 V, use in individual residences up to 400 kg. What. Built on a sturdy aluminum monoblock injected and oven lacquered with special outdoor epoxy resin. It has a precise encoder that facilitates maximum control over the speed, strength and position of the door. Incorporates maneuver chart easy start-up with self-learning of the basic working parameters. Transmission consisting of endless steel screws and bronze crown obtaining a door movement soft, quiet and very reliable.

Kits Linear hydraulic motors Erreka VULCAN intensive use for double swing doors residential, community and industrial with a maximum leaf length of 4 or 6 metres depending on the chosen stem.

KIT Motor Came BX-78 from 230V for sliding doors of up to 800 kg and of a length not exceeding 14 metres. What. It incorporates electronic card with programming display, built-in radio decoding, motion control device and mechanical race terminals.

" THIS PRODUCT IS DISCONTINUED, REPLACED BY MODEL OTHER OF A THICKNESS OF "

Outer receiver Clemsa MasterCode RV44, frequency 433.92 MHz 4 channel 230Vac or 12/24V ac/dc power supply.

• Automation for bellow or dissected gates Motorline KFM, effective and robust intensive use with built-in central.

Saxo or telescopic gearboxes for Medva model HB1 engines

Table of manoeuvres V2 EASY2 230V analogue for roller blinds with courtesy light and automatic closure.

Replacement of maneuver box or electronic plate TMP Jaguar. Equipment designed for motor drive TMP Jaguar Low of Duty Duty to 24V and Encoder.

The plant incorporates a Internal receiver at 433,92 MHz compatible with controls TMP Link.

Security receiver by radio 868MHz Erreka RADSECRX that next to the issuer Erreka RADSECRX will get a two-way radio communication.

Clamp for guide of the ROSSO EVO with 350 mm

O-Box is the multifunctional interface that, through the dedicated software O-Box Software Suite”, allows you to configure and program directly with a PC or PDA, in a simple and intuitive way, transmitters and receivers other, of circular cross-section Nice.

Mobile support for mast barriers Motorline

Other, of circular cross-section V2 AGON for revolving doors with axle 60 and up to 280 kg with electro-brake. What. Motor for spring-loaded industrial revolving doors, axle 60 mm in diameter, lifting capacity up to 280 kg and crown 200/220.

Table of manoeuvres BFT ALPHA SD for sliding doors and shutters. What. For residential use only, both in households and communities of owners. The functions can be programmed by LCD screen. It has a removable knob to connect accessories that extend the functionality of this control board. Up to 63 controllers with Rolling Code technology can be installed.

" THIS ELECTRONIC PLATE IS OUT OF CATALOG. THE NEW PLATE REPLACES IT SHYRA CPEM FULLY COMPATIBLE "

Electromechanical engine V2 In the case of ATRIS 24V of a kind used in motor vehicles up to 15m2, with a starting force of 1000 N (100 kg)

Radar Motorline Small RAP50 microwave technology ideal for glass doors and pedestrians, which can be installed up to 4 m high.

Sensors are the electronic devices used to activate the door opening as well as to ensure the safety of users.

The serie BFT Kustos BT B is a range of 24V electromechanical pistons Designed for the automation of Residential and community swing doors. These operators stand out for their reliability, safety and ease of installation, being suitable for doors up 4 meters long and 700 kg of weight according to the model.

Electromechanical engine BFT 24V "KOSTOS ULTRA BT A" intensive use up to 500 KG and 4 meters.

A complete range of electro-mechanical pistons for residential use, suitable for swinging pistons up to 5 metres wide and weighing up to 500 kg.

Quick and practical installation: the new KUSTOS BT A operators have been designed to allow quick and easy installation thanks to a number of important devices such as the covered endless screw and magnetic limit switches, among others.

Hydraulic motor Aprimatic LEVA50 intensive use for use in the manufacture of motor vehicles up to 10m2 and MAXILEVA50 for doors up to 16m2.

Hydraulic operator for one- or two-bladed counterweighted swing doors. Torque control valves incorporated. Hydraulic deceleration at the end of the journey. Intensive use. Hollow shaft.

Decoder V2 DEC4-PLUS for the Proxima readers.

Column of black anodised aluminium for photocells CAME in the case of vehicles of categories M1 and N2.

Enclosure for double swinging door allowing the first sheet to be fixed to the ground once the second sheet has been closed.

Engine Nice ROBUSKIT 600 BD 24V with two-way emitters for residential sliding doors up to 600 kg.

Casing or adapter Clemsa AD2000 for RFID readers of models CK40, CK42.

If the vehicle is equipped with an electric motor, it shall be equipped with an electric motor.

Designed for use in GEARBOX engines.

Kit of 2 grooved crankshaft for Medva BASIC H4 engine.

Front cover with OPEN-CLOSE-STOP buttons for steering wheels Erreka I LIVE.

Sensor FAAC XDT1 with dual technology for movement and presence.

Aperture and security in one sensor. Safety control according to EN 16005.