Other, of circular cross-section for steering wheels with connection 6 pins with output 4 pins other, of circular cross-section Clemsa Mutant code is RNE248.

Module for the operation of 1 automatic open-stop-close in single or multi-group mode.

The SPACE N automation has been designed for sectional and swing doors of piers up to 16 m2, for residential use and medium to high intensity. A motor that is characterized by having a fast movement (24cm/s), silent and powerful.

QBE is the innovative solution for a new generation home.

It allows you to remove wires thanks to the wireless connection and control, with a single tool, all automated systems inside and outside the home.

Traditional home automation systems are expensive and require specialized personnel to install all the necessary wiring.

QBE uses wireless technology, specially developed to control each electronic device without using wires.

In addition QBE connects in Wi-Fi mode to any router it is also important to note that the Commission has not yet adopted a proposal for a regulation.

Pair of safety photocells Beninca Pupil oriented 180o. Ability to synchronize up to 4 pairs. Power supply 24 Vdc.

Easy adjustment by LED indicating correct alignment.

The MX14 and MR14 devices are a solution developed for the prevention of automated vehicle accidents, as required by EN 12978.

Battery accumulator and load regulator included and 20W solar panel for 24V automatic systems. What. With the ECO-LOGIC module we can drive sliding or swinging motors if necessary to have electric current at 230V.

Nearkey is an access control device mainly applied to the opening of electric doors and push buttons and buttons using the smartphone and Bluetooth technology.

Lamps and lighting fittings CAME KLED for automatic door signalling, fed at 120/230 Vac.

Suitable for outdoor use (outdoor and waterproof).

Mechanical stop in beating motor lock V2 STARK THREE.

Garage crew FAAC TM1433DS binary at 433 MHz.

The encoding of this emitter is done by a combination of 12 dip switches.

Sliding engine EMFA "COMEC 20 HE' for industrial doors up to 2000 kg. Version electromechanical 230Vac with built-in display. The COMEC 20 HE engine has the oil bath gearbox, prepared for intensive use and self-ventilated.

Motor mounting bracket or plate FAAC 580.

This support is what is placed on the door and on it is placed the hydraulic motor.

AB/BRACKET' roof mount for sectional engines DEA.

Safety deposit box DEA Blinds for placing external unlock device, ideal for sectional door unlocking cables.

Control panel Clemsa Class 30.1 for the actuation of 24Vdc sectional roof doors. What. Residential use. This is a manual/automatic/semi-automatic.

Battery buffer 24V 1,6 Ah for sliding motor V2 THE TORQ.

Metallic protector Erreka LPRER4 for safety mirrors of photocells.

Passive band Erreka rubber bumper profile designed for automatic tilting, sliding or swinging doors.

2 Ah battery kit for the FT210/FT210B transmitters.

Surface keyboard CAME SELT1W4G wireless over radio 433,92 MHz, with 12 buttons with backlight it's blue. Capacity for 25 memorable codes and programming access password. Configurable in Rolling Code or Fixed Code mode. The gray colour RAL7024.

Electronic plate BFT SCHEDA LEO B CBB for sliding engines from Icaro.

The electronic board is compatible with the following models:

• Sliding engine BFT Icarus SMART AC A
• Sliding engine BFT Icarus ULTRA AC A

External receiver Came RE432M 2 channels and multi-user, working frequency 433.93 MHz and 12-24V AC/DC power supply.

Medva "VERSUS I20ES" triphasic 230/400 V, absolute or end-of-race encoder, with configurable inputs and outputs.

Transmitter CAME ELVIS 433.92 MHz with one channel in white.

Allows control and management of tubular motors CAME for blinds and awnings.

Electronic plate Forsa ERG 24V replacement for the tilting motor, which has a display for programming parameters and memory of remote controls.

Table NO incorporates built-in receiver, must therefore be added in an additional form by inserting it into the corresponding socket.

External receiver BFT "CLONIX 2E AC U-LINK 230' with built-in receiver 433 MHz, compatible with the U-LINK protocol (equipped with 3 connecting slots). The Receiver is powered at 230Vac and has a memory capacity of 2048 users.

Table of manoeuvres BFT "ALCOR' for 1 or 2 230V pulsating operators with built-in receiver.

The control panel has: for use in the manufacture of motor vehicles [1] used in sliding doors, with control of a sensitive bar and the possibility of checking security entrances. You can also manage the connection with an EBP electric lock or an ECB (with an additional ME card).

The radio receiver has been incorporated with variable code technology.

The terminals are colourful and removable to manage the cables with greater agility.

Infrared radar 3H-IR14C Double technology with safety 3m maximum height, 4 dual relay outputs certified according to EN 16005.

Automatic activation of sliding doors and pedestrian safety sensor. Small in size, with a precisely adjustable detection area.

Electrical brakes Forsa IT'S UNIQUE.

The clutch or electrobrake allows us to lock the blind so that it cannot be manually actuated, and in case we have to unlock to open manually we have a knob that we must operate to be able to unlock or unlock.

Traffic management box Celinsa to regulate and control the passage of vehicles.

Manufacture from materials of any heading BFT "MURA A30' anchorage for automatic locks and safety devices up to 30 metres.

For the purposes of this Regulation, the following definitions shall apply:

KITs Electromechanical engines DITEC PWR50 24V for heavy duty double swing doors with a leaf length of up to 5 metres.

Reversible actuator DITEC The 24 Vcc PWR50 is intended for frequent and intensive use. With machinery for making pulp of fibrous cellulosic material.

Base or bench PPA in iron for sliding motors.

Table of manoeuvres CAME 801QA-0050 for one or two 24 V electromechanical vibrating motors.

The plant is powered at 230Vac and has a programming and indication display, self-diagnosis of the safety devices, Adaptive Speed & Torque Technology,

Hydraulic motor FAAC 422 for residential or communal sliding doors of 1.8 m to 3 m each.

Machinery and apparatus DEA TEO700 steel allowing to gear the engine axle with the cog wheel.

Machinery for making pulp of fibrous cellulosic material Nice "WALKYKIT 2024' for residential swing doors of small dimensions up to 1,8 m per sheet.

It is particularly suitable for small wooden or PVC doors.

Irreversible electromechanical gearbox motor of 24 Vdc, with articulated arm.

Replacement rope unlock Motorline RED EVO.

Biometric sensor Motorline Independent MLB2 with built-in RFID system for access control. What. Ideal for use in companies, offices, condominiums and any other place where there is a need to manage and control the entry and exit of people.

Replacement nylon crown BFT For the purposes of this Regulation, the following definitions shall apply:

Plastic housing for sliding motors Nice THOR IS 1500.

KIT Closing caps + cable insertion and rubber resistance V2.

Outdoor antenna designed for installations with reception problems due to obstacles such as metal surfaces, radio shadow zones or long distances.

The external antenna RET 400 needs to be connected a decoder card or Access Control, replacing these to the affected receivers if necessary. This connection is carried out using only two wires, so the installation is simple by taking advantage of cables from old installations of other equipment

The power source Motorline FAC5A with battery charger is ideal for installation in pedestrian doors, allows us to place electrical or magnetic locks as well as for connect an access control. What. It has a power supply capacity up to 5A and has a box with a stand to place a battery.

Removable memory card GO FORSA with capacity for 500 users.

Hydraulic whip EMFA meters with its racors designed for swinging and swinging doors.