Engine Pujol Marathon PRO Q III three-phase for sliding doors up to 2000 kg residential, community or industrial. Equipped with electronic board and built-in receiver.

Electromechanical engine Erreka KAIROS at 24 Vdc of a kind used in motor vehicles up to 300 kg or 3 metres per leaf for residential or community use.

Intermittent light and acoustic pilot, powered at 230V, ideal for sound signalling and warning of the presence of a vehicle when entering or leaving the garage.

Reversible electric lock EC113. What. Adjustable input of 50 to 70 mm. What. Food 12V ac/cc. What. Inner and outer bulb 60 mm.

Electric lock applicable to interior and exterior doors and gates, ideal for folding/sloping doors.

Hydraulic operator Aprimatic TWENTY 270 for swinging canes one or two leaves, semi-intensive use. Speed deceleration closing. Built-in anti-crush safety valves. Quick emergency release. Useful length of stem 270 mm. Stem diameter is 16 mm.

Engine FAAC 412 electromechanical 230 V for hinged doors up to 6 feet, ideal for residential use.

Telescopic masts barriers Motorline KBM6, KBM8 and KBM11

LED traffic light Clemsa of two red and green lights or Amber With a lens diameter of 120mm of 25 LEDs. It is ideal for signaling the passage of vehicles or people.

Basic Control Panel Clemsa CLAS10 for tilting doors. What. Residential use 230V. Maximum power 750W. Programmable opening and closing time from 6’’ to 70’’.

Control of household blinds Somfy this Regulation shall be binding in its entirety and directly applicable in all Member States unidirectional 1 channel at 433,42 MHz.

Sliding engine Motorline Manufacture from materials of any heading, except that of the product very heavy.

Developed and produced in Portugal, STARK is available in 3 versions, 4000Kg, 6000Kg and 8000Kg at 230Vac or 400Vac. What. More compact and modern, it also has quality mechanics, making it an elegant and reliable engine.

Asemgay is a device whose function is to discriminate calls used to manage traffic lights. What. It's housed in the control panel of the automatic doors.

The universal receiver BFT Clonix 2E, you can connect any manoeuvring box on the market that has a voltage output of 12/24VAC/DC.

This receiver card has two channels for pulsing two actuators or electronic devices.

It has capacity for 128 additional transmitters in auto coding the working frequency is 433.92MHz

Engine Nice RUN 1800/2500 kg of 230 V Irreversible for sliding doors with built-in control.

Self-ventilating motor with in the case of vehicles of categories M1 and N2 with a maximum mass exceeding 2000 kg: and with the electromechanical end of run (RUN1800/RUN2500/RUN2500I).

Engine Nice SPINBUSKIT BD 24V 650N with magnetic encoder and two-way emitter, for sectional doors up to 10,5 m2, and for hinged doors up to 11,8 m.

Receiver kit Nice long range OXILR with two-way emitters and a universal adapter for frames from other manufacturers.

Electric brake Clemsa EF81 for rolling stock AR2581, allows us to block the blinds once closed. Emergency unlocking can be done with the handle on the mechanism.

Kit of mini photocells with switch and stands of application for KAPV automatic doors.

This module photocell set adapts a control technology that offers high integration and stability. Easy to install, this product has lenses with excellent focus quality. It gets a long transmission distance, no interference.

Electromechanical barrier 24 V CAME Gard GT4 heavy duty with aluminium mast in white lacquer of 90x60 with a length of 4220 mm.

Pinon Z15 M4 slide for engines Nice from the ROBUS and THOR series

Motor kit CAME BKV15AGS at 36 V for sliding doors up to 1500 kg both residential and communal. Includes graphics card, Adaptive Speed & Torque Technology, 4 safety inputs, movement management and obstacle detection.

Pulsed SMD 6x6x4.3mm (10 units)

Plastic housing for sliding motors Nice Robus is 600/1000.

Table of manoeuvres Pujol SENIOR 1 analogue for swing doors with electric lock output.

Electromechanical motor 230 V ERREKA DELFOS for residential and industrial revolving doors with a lifting capacity of 170 to 360 kg, for tubes with shafts of 48 mm, 60 mm and 76 mm.

Magnetic loop detector Erreka IBUC (Carlo Gavazzi) What is it in 230Vac of measurements 80x40x79 mm, available for 1 or 2 loops.

Car unlock set Motorline RED EVO.

Unlock key V2 It's called Calypso.

Unlocking lock assembly PZ.38 for sliding engine TMP Sprint low. Includes two keys.

PUJOL armored box with unlocking lever designed to incorporate electrobrake of the rolling motors, it also incorporates an internal switch to operate the automation (up and down).

Vertical electric lock BFT "EBP AC A' of 230 V.

Electric vertical floor lock, for automating swing doors. It is an important accessory for completing an installation and for safeguarding the gear motors installed in large doors; in addition, it is essential to enable the doors to be locked with reversible operators. Different models are available in 230V, 120V and the new 24V version, connected directly to the control unit. The wide operating temperature range from -20°C to +55°C allows its application in a wide variety of situations.

Mechanical safety belt EMFA 70 mm by micro-switches, with cable voltage monitoring and sensitivity regulation.

It can be used for swinging or tilting doors, sensitive over the entire path of the band (including ends).

Integrated electronic board BFT "MERAK' for 24V operators of sliding failures.

Table of manoeuvres DITEC LCU40H for 1 or 2 motors at 24 Vdc with display programming.

The boards of the Ditec LCU series make it possible to easily configure, by means of the display, the operating modes and to control at all times the position and speed of the, allowing regulation of acceleration, deceleration and start time, deceleration space and approach speed in opening and closing. Thanks to the additional plug-in cards it is possible and

Lever unlocking sliding engines Nice ROBUS, ROAD and ROX.

Issuers V2 LOKI Tube engines for domestic blinds and awnings.

Cylinder unlock lock BFT "PHOB A", "COSTOS", "DEIMOS", AND "ICARO".

Other, of circular cross-section BFT WE PUT A400 AND A600.

Motor gearbox replacement Motorline RED EVO.

Electronic plate CAME & MOTOSTAR XS100.

DEA "NET-NODE 2.0" is a device that connects to DE@NET hubs and external receivers.

Thanks to NET-NODE, for programming with a smartphone you can use the DEAinstaller and DEAuser applications on your smartphone. It is only compatible with DE@NET power plants equipped with serial port and NETLINK technology.

230Vac to 20V transformer with 150VA and 4A.

Unlocking Nice WINGO thumping engines.

Impulse garage light card Clemsa TG3 for old CLAS manoeuvres.

Column FAAC for photoportable cells with a height of 50 cm.

Receiver 12/24V 433 MHz 1 channel.

Encoder for sliding engine Pujol Mini Marathon 400kg 24V. Compatible with the new series Mini Marathon Pro.

Replacement Baseboard and Display Motorline RED EVO.