TAG or marine electronic proximity ring 13,56 MHz.

Compatible with the reader "LPROX-MF".

Hydraulic oil for SEA engines packed in 1 liter, designed to cool the coil of the sliding engines.

Table of manoeuvres AERF SIMPLY with built-in receiver for 1 230V motor designed to drive centre axle rollers with a maximum power of 736W and planned for the end of the race.

Open source built-in receiver the keeloq type at 433,92 MHz (SIMPLY 1H4) or 868 MHz (SIMPLY 1H8).

Receiver AERF "SRM 1L4255" for outdoor use 12/24V with 1 channel, rolling code 433.92 MHz.

Bi-Motor (doble bobina) ACM para puertas enrollables 60/280 con electrofreno. Motor para puertas enrollables industriales compensadas por muelles, eje de 60 mm de diámetro, capacidad de elevanción de hasta 280 kg.

KIT engine Clemsa "AB10BC' electromechanical 230V for residential counterweighted tilting doors up to 10m2.

The actuator has the manoeuvre chart CLAS107 incorporated, irreversible locking system with mechanical locking so no locks are required. The manual interior unlocking allows us to actuate the door manually in case of lack of electric current.

The outer receiver Clemsa Mutant code RN44 is the most versatile of the family of Clemsa, and a width of not more than 50 mm, with a power supply of 230 Vac or 12/24 Vac/dc. Frequency 433.92 MHz or 868 MHz.

Motor kit CAME BXV06AGS at 24V for sliding doors up to 600 kg both residential and communal.

Garage crew Telcoma EDGE two channel rolling code 433.92 MHz.

Wi-Fi controller for the smartphone operation of automatic systems of the mark Nice. What. It includes domestic blinds, section motors, sliding motors or lights.

Tubular motor CAME MONDRIAN 6 (mechanical without radio) or MONDRIAN R6 (radio mechanic) of Ø 55 mm for Ø 60 mm and Ø 70 mm pipes.

With a Ø 55mm is ideal for installation in any automation of awnings, blinds, screens. being used for different tubes such as Ø 60mm and Ø 70mm round or also octagonal (possibility of use on other types of pipes and diameters), incorporates a universal head for the application of any mechanical manual stop and fixing plate with progressive screw adjustment.

Hydraulic motor for tilting doors one or two-bladed counterweights with a not more than 14 m2, for residential, community or industrial use.

Sectional motor guide DEA TEO 700 in steel and chain length 3300 mm (divided into two 1500 mm pieces).

Other, of circular cross-section V2 SENSIVA synchronized and oriented 30o.

Receiver FAAC RP 868 SLF plugged in, fast-coupling (compatible with all electronic devices FAAC of a kind used in motor vehicles 5 pin rapid coupling, or external utility by connecting to the interface of the accessory RP relay).

KIT Electromechanical engine V2 "ATRIS 1000' Irreversible 24 V for sectional and tilting doors of up to 15m2, with a starting force of 1000 N (100 kg).

Piston assembly hydraulic lock for unlocking the hydraulic motor Erreka OTHER. What. Includes a 1-meter whip.

DOOYA transmitter 1 channel 433,92 MHz for tubular motors for household blinds (with fan function).

It incorporates a magnetic base to attach the controller to the wall.

2 channel remote control Dorcas model K43 for opening a receiver Dorcas K4.

Pair of photocells Allmatic FTALL7 (TX / RX), at modulated infrared, range up to 25 metres, with a new and refined circuit designed to ensure maximum immunity to external disturbances and interference. Integrated synchronous circuit.

Saxo electric motor DEA 902 LIGHT.

Rechargeable battery CR2032 of 3.6V 180o to replace BMW.

Replacement rear fork Clemsa A300/400.

Electronic card 780 D for sliding motor FAAC 746 and 844.

Hose cable 8 threads + screen (Erreka).

Quick support Erreka SENA-C for compact drawer.

Electromechanical engine DEA "LIVI 902 SR' 230V for semi-intensive residential tilting doors up to 9 m2 with built-in analogue box-receiver.

The engine incorporates mechanical opening-closing stroke ends for more precise adjustment.

Plug-in receiver card1 channel, with a capacity of 400 codes or 1000 codes, for plugging into manoeuvring frames with standard 4-pin connection, specially designed for CLEMSA frames. The encoding of the memory card is done with the PC-Copy duplicator.

Damper with regulation and magnet Medva"CIL3095" with 95mm stroke designed to dampen the closures of industrial sliding doors.

The linear damper CIL3095 – CIL30120 reduces the speed of the door during the final stretch of the tour, avoiding sudden knocks and personal injury. The speed can be adjusted according to the need of the installation. The shock absorber is automatically charged by the neodymium magnet each time the door is opened, being operational for the subsequent closing cycle.

Motor gearbox FAAC D1000 / GENIUS ZODIAC 100 / CLEMSA AS60-120

Garage crew CAME model TOP-434EE with 4 channels, fixed code at 433.92 MHz with self-learning recording system with a pre-programmed control on the receiver.

Other, of circular cross-section CAME MONDRIAN 4

Box battery 24V Nice PSY24 with control circuit and transport handle, intended for use with the Solar Solemyo KIT.

Hit the chain DEA simple 1/2 times 1/8.

12mm resistant safety band kit.

The band is prepared to be mounted directly into the installation wirelessly through a RadioBand.

Quartz transmitter Aprimatic tG2C model of two channels, fixed code, quartz to frecuencua 27.195 MHz. Programming by placing dip-switch.

Hydraulic motor Erreka 230Vac ATLAS for residential or community intensive use for doors up to 15 m2 with an obstacle detection system. Available in reversible or irreversible versions and with anti-lock system.

Hydraulic motor HYDOM 4LR Semi-Intensive for swing doors for residential use up to 3.5 metres per blade. What. The actuators are powered at 230V and have 250mm stroke, hydraulic damping in opening and closing, available version without lock and with double lock.

Keyboard Erreka with a thickness of not more than 10 mm for access to housing or commercial premises. With output of 2 NA/NC relays and up to 250 codes.

KIT Sliding engine Clemsa "AC562N" electromechanical 230 V for residential doors up to 500 kg. It incorporates a manoeuvre chart CLAS62C. The actuator has magnetic running ends, levered unlock system, aluminum body painted with polyester powders and ABS crankcase. in addition, thanks to its anti-crush system and smooth stopping we will have an engine with reliability and maximum precision.

KIT engine Motorline SLIDE800A at 230V with oil and grease lubricated reducer for sliding doors up to 800kg semi-intensive use and IP44 protection.

The electromechanical actuator Erreka ARES is designed to drive automatic doors for use in the manufacture of motor vehicles.

Easy installation with two stem sizes (300mm and 400mm race), economic range, with obstacle detection and electronic soft shutdown.

Side bar or bar with bucket for tilting motor Erreka THE ATLAS.

Longingtwo meters per unit.

Electromechanical safety belt Clemsa, under the supervision of the cable tension and with sensitivity regulation. What. Recommended use for folding doors. Sensitive throughout the course of the band (even extremes).

Electromechanical engine Clemsa TO 300 for folding doors up to 3 metres in length per sheet, of semi-intensive residential use. 

Curved arm Motorline reference ARC007 other, of circular cross-section type ROPER or not overflowing.

The curved arm is necessary for most Roper manufacturer swing doors.

KIT Electromechanical engine V2 AZIMUTH irreversible for sectional and tilting doors up to 8 m2.Starting force 500 N 50 kilos .

Motorcycles V2 Electromechanical doors for sliding doors of 500, 600, 800, 1000, 1200 and 1500 kg with magnetic finishes and digital maneuver board with encoder.