Pre-wired aerial receiver Nice 2 channel transmitter compatible Nice it shall be capable of operating at a frequency of 433,92 MHz (FLO, SMILO and ERA INTI).

Casing or Tube of attachment of a kind used in motor vehicles Minimax Hydom.

Control, programming and diagnostics unit for equipment with the BUS T4 connection, in situ or remotely via GPRS through the connection with your PDA, Smartphone or PC.

Change of maneuver board V2 OTHER for hinged doors up to 9 m2.

Support bolt CAME THE FOLLOWING PARAGRAPH IS ADDED: for tubular motors with a diameter of 35 mm.

Extension of iron rod for ROSSO EVO (1m) + Chain

Electromagnetic lock of 380 kg Motorline EF380.

The electric lock has an LED that indicates whether the door is open or closed and whether the power supply used is the most appropriate.

Table of manoeuvres DEA 400RR digital three phase 400V AC or single-phase 230V AC (with 100G box or without box) for 1 engine with encoder (Gulliver-Lato).

Tubes and pipes for household blinds, curtains and retractable displays from 36 to 92 kg it can be used both in a drawer and in a compact drawer.

The operator is powered at 230Vac and has a a diameter of 45 mm for for use in the manufacture of goods of chapter 87. What. It has a mechanical manual end run with progressive screw regulation.

Three-phase control panel Pujol The Master Pro III at 230 V/400 V.

Distance control DTM-ROLL at 433.92 MHz for the duplicate Rollingcode controls.

* Special prices for professionals. Contact us to open your file.

Distance control DTM-2 at frequency 433.92 MHz for duplication of fixed-code commands such as binaries and trinaries.

* Special prices for professionals. Contact us to open your file.

230 V Medva HLR hydraulic motor for residential and community swing doors a maximum length of 3 and 6 metres.

Improvements to the actuator have been applied that make it quieter and faster, offering a higher opening and closing speed.

Engine with a new pump, makes it faster and quieter.

Patented adjustable ring system on the stem to adjust the degrees of aperture, smooth stop adjustable at opening and closing.

Connection to hydraulic lock.

Replacement motor pinion Nice IT'S ONLY 2000.

Other bars and rods, not further worked than cold-formed or cold-finished, has a SAG lock protected with a patented card and an internal pusher for up and down automation maneuvers.

It can be installed on site or screwed on the surface.

Replacement plate CAME THE ZBK.

Triangular unlock key FAAC.

Hang 3 knots of iron or zinc for tilting doors.

Vertical electric lock BFT "EBP AC A' of 24 V. It includes a transformer.

Electric vertical floor lock, for automating swing doors. It is an important accessory for completing an installation and for safeguarding the gear motors installed in large doors; in addition, it is essential to enable the doors to be locked with reversible operators. Different models are available in 230V, 120V and the new 24V version, connected directly to the control unit. The wide operating temperature range from -20°C to +55°C allows its application in a wide variety of situations.

Range of buried operators BFT SUB for residential and community cancellations.

Sliding doors in zinc or aluminium.

Side pin for iron swing doors.

Sectional engine Forsa DELTA for residential sliding doors up to 18 m2 with built-in receiver box and manual unlock.

Automatic self-locking 24Vdc for residential sectional doors and overhangs In the case of vehicles of categories N1 and N2.

Control panel BFT THALIA BT A80 DUO for 1 or 2 operators of 24V for cancellations in high complexity systems.

Engine Nice Wingo WG3524 24V electromechanical for swing doors up to 3.5 meters per leaf.

Hydraulic oil for SEA engines packed in 1 liter, designed to cool the coil of the sliding engines.

Issuer FAAC XT4 SLH 4 channels and frequency 868 MHz.

The programming or memorization of the new emitter shall be performed by proximity or confrontation from an original operating control.

* Special prices for professionals. Contact us to open your file.

PUJOL WINNER PRO 600/200 Roller door motor designed to automate roller shutters garages and commercial premises, with lifting capacity of up to 170 kg.

The WINNER PRO engine does not incorporate electrofreno and is designed for 48/60mm shafts and 200/220mm pulleys.

Hydraulic lock for locking with bracket and rack for HYDOM MINIMAX & ROTOR-UNIC.

Motor for residential sliding doors (version 230V), or semi-intensive use (version of 24 V). 400, 600 or 800 kg version.

For the purposes of this Regulation, the following definitions apply:

Saft AA lithium batteries for industrial and commercial applications. These AA batteries are not like conventional AA batteries. They have a rated voltage of 3,6 V and can be used in applications where the device must operate for a long period of time such as meters, alarm systems and safety devices.

The LS14500 batteries use lithium thionyl chloride, which gives them a high energy density and a low discharge rate, ideal if they are to be stored for long periods. In addition, they comply with the safety standards IEC60086-4 and IEC60079-11.

Operator with diameter 35 mm (10 NW) or 45 mm IN THE CASE OF VEHICLES OF CATEGORIES N1 AND N2 for household blinds. What. With a simple regulation end race system.

KIT Motor for sliding door Erreka PUMA INVERTER, at 230Vac for residential use up to 400 kg, with magnetic end run and obstacle detection.

Wi-Fi controller for the smartphone operation of automatic systems of the mark Nice. What. It includes domestic blinds, section motors, sliding motors or lights.

Tubular Motorline For roller domestic blinds and curtains with a shaft 35mm.

Engines designed for Motorize blinds and curtains, interiors or outdoor, allows the application of various accessories to work with all types of tubes.

Sectional motor guide DEA TEO 700 in steel and chain length 3300 mm (divided into two 1500 mm pieces).

System to control capacity a business, office, swimming pool or commercial premises in a simple and intuitive way.

Autonomous operation. What. All you have to do is type in the maximum capacity you want for the establishment.

Operator BFT "TIZIANO B GDA 260 S01' for sectional garage doors with a tensile strength of 60 kg and heavy duty. What. Area of the door 10 m2. Opening speed 6.6 m/min. D-Track

With a thickness of only 13 cm, TIZIANO is one of the most compact operators on the market, so it can be installed in any architectural context.

Thanks to the radio receiver built into the control centre, the TIZIANO can memorize the code of 10 remote controls from the MITTO or KLEIO series and/or wireless control systems such as, for example, MIMEPAD or T-BOX.

Piston assembly hydraulic lock for unlocking the hydraulic motor Erreka OTHER. What. Includes a 1-meter whip.

2 channel remote control Dorcas model K43 for opening a receiver Dorcas K4.

Central Motorline MC62 developed to work with 1 or 2 24Vdc motors, with a maximum power of 120W each

230V Medva ECO hydraulic motor for residential and community swing doors with a maximum length of 4, 6 and 7 metres depending on the model.

Improvements have been made to the actuator to make it quieter and faster, offering higher opening and closing speeds

Patented adjustable ring system on the stem to adjust opening degrees, adjustable soft stop at closing.

Machinery for making pulp of fibrous cellulosic material, except in the BACN model.

Motorline M1805 is a compact automatic for swinging pedestrian doors up to 120 kg with the possibility of application on all types of doors of wood, iron and glass, by applying the appropriate accessory.

Two models availableM1805 and M1805 ECO

The automation M1805 ECO differs from the other model by being more economical, as it cannot be installed on evacuation routes. (See comparative table)

The electronics are ready for emergency batteries, radars, security photocells and electric lock.

Allow me for use as a panic alarm door (model M1805), in which when forced the door opens immediately.

Painting Nice D-Pro 500 for single-phase 230V or three-phase 400V motors with mechanical and electronic running ends.

Program selector Motorline MCELE01 to define the different modes of operation of automatic glass doors KAPV and pedestrian motor M1805. It can work with a security code so that when exposed, its use can be blocked.

Garage crew MEDVA model of the vehicle with 4-channel RollingCode coding at 868 MHz.

The new transmitter can be programmed remotely using a pre-programmed control or by pressing the "PROG EMISSORES" button on the receiver.

Rechargeable battery CR2032 of 3.6V 180o to replace BMW.

Hose cable 8 threads + screen (Erreka).