Replacement Motorline KBM6 - Module 3 relays for the management of LED RGB lights

Replacement Motorline KBM6 - RGB board with LEDs.

It's a two-channel PC

Software engineer Clemsa PT8 for facility management by Software SW8 for the management of Mutan-II and MutanCode systems via Smartphone (Android).

KIT Sliding engine Clemsa "AC424N" electromechanical 24V heavy use for residential doors up to 400 kg. Includes Sprint M24 maneuver board. The actuator has magnetic running ends, levered unlock system, aluminum body painted with polyester powders and ABS crankcase. in addition, thanks to its anti-crush system and smooth stopping we will have an engine with reliability and maximum precision.

Electromechanical barrier BFT Semi-intensive MOOVI30 with 3M rectangular mast, Compact suitable for delimiting private areas, parking and exclusively vehicular access accesses.

The barrier is supplied in color gray ral 7015 and has a 3300mm mast with a useful step of 3000mm with a 4.0 sec opening time. Reaction to the impact by sensitive bar. Central with built-in viewfinder.

Race finish SPAZIO 703

Garage crew Clemsa model MUTANcode N84 4 channels, rolling code 868 MHz.

This emitter comes with the standard code, so it won't work in garages where an installer has put in a custom code. It is 100% compatible with the receivers and receiver cards of this website Tecnoparking. Activation can be done by the receiver button or remotely by radio with a pre-programmed control.

Product discontinued by the manufacturer. Not available for sale.

This model has been officially replaced by a more current version, which incorporates technical and functional improvements.

👉 Recommended substitute product:

Kit CAME Axo 5024 | 24V electromechanical motor for swing doors up to 5m

Sliding engine Clemsa "AC562N" electromechanical 230 V for residential doors up to 500 kg. It incorporates a manoeuvre chart CLAS62C. The actuator has magnetic running ends, levered unlock system, aluminum body painted with polyester powders and ABS crankcase. in addition, thanks to its anti-crush system and smooth stopping we will have an engine with reliability and maximum precision.

Motor gearbox BFT IT'S CALLED TIZIANO B GDA 260 S01.

Unlock leverage BFT WE WENT ULTRA.

Sliding motor housing BFT IT'S CALLED URANIUM.

KIT watertight seals hydraulic motors BFT P & ORO (3 units).

AB-TALOS anti-vandal keyboard with fully autonomous built-in decoderit works independently.

Table of manoeuvres Clemsa "SPRINT M24' for sliding engine 'AC424N'.

KIT Sliding engine Beninca "BULL5M' 230V for residential use up to 500 KG with built-in receiver. What. Possibility to optionally add Encoder and Magnetic Race Ends.

Sliding engine Beninca "BULL10M' 230V for lamps for Community use up to 1000 KG. What. It incorporates central with receiver, encoder and custom unlock key. Available model "BULL10M.S" with magnetic running ends.

KIT Electromechanical engines Beninca "BOB30' for residential sliding doors up to 3 m per sheet.

Reliable gearbox, quiet and quick to install, thanks to the 2 mechanical stoppers adjustable in opening and closing. Available in 230 Vc and 24 Vdc versions.

KIT Sliding engine BFT "DEIMOS AC' electro-mechanical 230Vac for residential households up to 600/800 KG with electro-mechanical end of run.

The "DEIMOS AC" operators are ideal for motorizing residential doors with a speed of 9 m/min, they are easy to install thanks to their programming by trimmer and DIP switch. The end of the race is electromechanical.

KIT Electromechanical engines BFT "ATHOS AC A" Irreversible 230V for residential swivels up to 700 kg in weight and 4 metres in length.

Replacement of gaskets and motor tyres FAAC 400.

REFERENCES

• 1 unit 490329I 'm playing board game 400
• 2 unid 7090300015: Toric joints

Engine FAAC 415 24V electromechanical for heavy-duty sliding doors designed for residential or community use.

Replacement of sectional motor tractor Clemsa AS60 & AS120.

Engine gearbox Erreka IS4C.

Special 220V receiver base for electric locks or electric locks. What. It has a 12Vac outlet.

Ideal for controlled door opening (doors, office, etc.), controlled by remote control.

Unlocking mechanism BFT for ELI AC A, ELI BT A and SUB BT with leverage.

Plastic back cover Motorline KM25.

Pinon Module 6 CAME The engine is a BY3500 Ref 119RIY066.

2 battery pack 12Vdc/2.2Ah for motor Motorline THAT'S GOOD.

Leverage release Nice RUN

Lever axle unlocked Nice THE FOLLOWING POINT IS ADDED:

KIT Sliding engine Nice It shall be capable of operating at a voltage not exceeding 300 V for residential cancellations up to 600 kg. It incorporates a control panel with self-programming route and receiver 433 MHz compatible with transmitters Nice INTI2.

The gearbox Nice ROBO600 incorporates mechanical race finishes in opening and closing.

Key Tool Max is the new multifunctional professional computer, with integrated OBD cable, Bluetooth and Wi-fi.

Generation of smart keys and controls, programming of transponders, renewal of controls, recognition and copying of access cards, generation and copying of garage controls, frequency detector and copying of controls Xhorse.

Replacement DEA The MAC stator 90x50 H45 biphasic four-pole 220V 50Hz

Replacement Pinon Nice SLIGHT SLH400

Set of two roller bearings drive two blades FAAC A1000.

Motorcycles Beninca VN.S/M & VN.ST/MT for industrial sectional doors up to 40m2.

Ditec E1HBOX electronic board with built-in receiver with potentiometers to regulate force and manoeuvre times.

Crown axle output group Nice HIS 2000.

Race terminals with spring for sliding motors BFT (pack of 5 units)

DMIL HURACAN 35 engine for swing doors up to 2,5 metres by sheet with built-in running ends.

Transformer CAME 119rir090 Original for automation CAME of 230 V. This replacement is designed to replace the source transformer and ensure stable power supply of the maneuvering box, recovering the correct operation of the motor and electronics.

Ditec magnetic race finishes for sliding motors.

Electric locks CAME LOCK82 12Vac/dc with inner and outer cylinder.

» Fully galvanized

» Operates at 12 V, 15 VA minimum and frequency 50 Hz

» Double light bulb

» measures 25 x 10 x 12 cm

Electronic plate BFT SHYRA for sliding engines "WE AC A".

Table of manoeuvres Nice SPNKA3R10 for NAKED engines after 2018.

Transmitter FAAC TM2 POP7 Frequency 433 MHz.

The transmitter has seven channels.