Best sellers

Showing 793-816 of 2073 item(s)

Sliding Gate Motors

Motor corredera Nice ROBUS 600 HS

Sliding engine Nice ROBUS RBS600HS high speed irreversible, 24 Vdc, magnetic race end, control unit with integrated radio receiver, optional backup battery (PS124). Ideal for intensive use: the opening of a 4 m cancellation takes less than 10* seconds. Efficient and safe: functional mechanical design and high performance materials. Reduction of 90% in...

Spare parts

Hydraulic engine oil EMFA MAP (2 liters)

EMFA

101052

€25.00

Hydraulic oil radial gasket in 2 liters for manufacturer's whirlwind engines EMFA MAP.

KIT engine Nice SPIDER 1200BL for sectional doors with...

KIT engine Nice SPIDER 1200BL for sectional doors with... 2

Sectional Door Motors

KIT engine Nice SPIDER 1200BL for sectional doors with integrated WiFi

Nice

SPRBL32BDWKCE

€357.00

Engine Nice SPIDER 1200BL WiFi integrated for sectional doors up to 17m2 or for a sheet of up to 19.5m2. Equipped with integrated central and bidirectional receiver. System Wi-Fi integrated able to control automatism through the MyNice application, compatible with Android and iPhone. SPIDER can also be integrated into the dometic ecosystem Yubii for use...

Surface photocells V2 DFN to embed self-aligning and...

Surface photocells V2 DFN to embed self-aligning and... 2

Safety Accessories

Surface photocells V2 DFN to embed self-aligning and synchronized

13A001

€49.00

V2 PX M 24 I are safety booths, self-aligning and synchronized, with feeding 12 to 24 V AC / DC and a maximum optical range of 25 meters. This system is composed of a TX transmitter and a RX receiver and is designed to be integrated into pillars, walls or other surfaces, achieving a more discrete and protected embedded installation.

Spare parts

Sectional motor base housing Nice SPIN

Nice

PPD1031R05.4540

€28.00

Other, of circular cross-section Nice IN ORDER TO ENSURE THE CORRECT APPLICATION OF THIS REGULATION, MEMBER STATES SHALL TAKE INTO ACCOUNT THE FOLLOWING:.

Vulcano 1000/1200 N Media Sectional Motor for Sectionable...

Vulcano 1000/1200 N Media Sectional Motor for Sectionable... 2

Sectional Door Motors

Vulcano 1000/1200 N Media Sectional Motor for Sectionable Doors up to 18m²

MEDVA

CABEZA VULCANO

€149.00

Motor head Vulcano For residential sectional doors with anti-crushing system and soft stop. The operator has a maneuvering box and built-in receiver. Attention: This product does not include the guide. The engine head is supplied to use as a substitution.

Spare parts

Key unlocking sliding motor FAAC 746/844

FAAC

7131005

€6.80

Key unlocking sliding motor FAAC 746/844.

Machinery for making pulp of fibrous cellulosic material

Door Accessories

Machinery for making pulp of fibrous cellulosic material

IMAN-GP

€15.00

High-powered magnet for automatic doors.

Spare parts

Transformer Motorline 230Vac at 20V with 150VA and 4A

Motorline

TRF150VA-230V

€35.00

230Vac to 20V transformer with 150VA and 4A.

Connection device DEA "NET-NODE 2.0" power plant...

Connection device DEA "NET-NODE 2.0" power plant... 2

Receptors

Connection device DEA "NET-NODE 2.0" power plant programming with Smartphone

DEA SYSTEM

677642

DEA "NET-NODE 2.0" is a device that connects to DE@NET hubs and external receivers. Thanks to NET-NODE, for programming with a smartphone you can use the DEAinstaller and DEAuser applications on your smartphone. It is only compatible with DE@NET power plants equipped with serial port and NETLINK technology.

Sliding engine Nice ROBO600 for residential cancellations

Sliding Gate Motors

Sliding engine Nice ROBO600 for residential cancellations

Nice

RO600KCE

€299.00

Sliding engine Nice It shall be capable of operating at a voltage not exceeding 300 V for residential cancellations up to 600 kg. It incorporates a control panel with self-programming route and receiver 433 MHz compatible with transmitters Nice ONE. The gearbox Nice ROBO600 incorporates mechanical race finishes in opening and closing.

Replacement plates

Electronic plate CAME & MOTOSTAR XS100

CAME

119RIMC019

€215.00

Electronic plate CAME & MOTOSTAR XS100.

Parking controls

I 'm in charge of the garage

Clemsa

N 84

€26.00

Garage crew Clemsa model MUTANcode N84 4 channels, rolling code 868 MHz. This emitter comes with the standard code, so it won't work in garages where an installer has put in a custom code. It is 100% compatible with the receivers and receiver cards of this website Tecnoparking. Activation can be done by the receiver button or remotely by radio with a...

Accessories Barriers to pass

LED strip CAME in red / green for barrier mast Gard

CAME

Tira LED GARD

€107.00

LED strip CAME In red / green for barrier mast Gard.

Spare parts

Tractor DEA SPACE

DEA SYSTEM

936160S

Replacement sectionally powered trailer DEA SPACE.

Safety Accessories

Box button pusher with 3 buttons (Open-Close-Stop)

Motorline

BOTPR-P

€35.00

Box button pusher with 3 buttons (Open-Close-Stop)with dimensions of 72x150x64 mm. Protected by IP65.

Control Panels

Table of manoeuvres DITEC LCU40H for 1 or 2 motors at 24 Vdc with display programming

DITEC

LCU40H

€210.00

Table of manoeuvres DITEC LCU40H for 1 or 2 motors at 24 Vdc with display programming. The boards of the Ditec LCU series make it possible to easily configure, by means of the display, the operating modes and to control at all times the position and speed of the, allowing regulation of acceleration, deceleration and start time, deceleration space and...

Electric locks

Vertical electric lock BFT "EBP AC A' of 230 V

BFT

P123032 00001

€87.00

Vertical electric lock BFT "EBP AC A' of 230 V. Electric vertical floor lock, for automating swing doors. It is an important accessory for completing an installation and for safeguarding the gear motors installed in large doors; in addition, it is essential to enable the doors to be locked with reversible operators. Different models are available in...

Gear racks for sliding gates

Other bars and rods CAME CGZ6 module 6 of rolled steel 30x30X1000 mm

CAME

009CGZ6

€42.00

Other bars and rods CAME CGZ6 module 6 of rolled steel 30x30X1000 mm.

Sliding gate accessories

Pinon Z16 FAAC for slide 746 and 844 engines

FAAC

719130

€30.00

Pinon Z16 FAAC for 746 and 844 piston engines.

Mass detectors and magnetic tie

Magnetic loop detector Erreka LBUC (Carlo Gavazzi) at 230Vac for 1 or 2 loops

Erreka

LBUC

€160.00

Magnetic loop detector Erreka IBUC (Carlo Gavazzi) What is it in 230Vac of measurements 80x40x79 mm, available for 1 or 2 loops.

Control Panels

Table of manoeuvres Aprimatic SC230 analogue for electro-mechanical operators of 230 V

Aprimatic

41626/001

€149.00

Table of manoeuvres Aprimatic SC230 analogue for electro-mechanical operators of 230Vac with running ends. What. Anti-crush function by torque limitation.

Tubular transmitters & accessories

CAME insertion of safety bolt

CAME

001YM0105

€3.00

CAME insertion of safety bolt

Electronic plate CAME ZL56 for 24V V900E sectional engine

Discontinued products

Electronic plate CAME ZL56 for 24V V900E sectional engine

CAME

3199ZL56

€98.00

Electronic plate CAME ZL56 discontinued The electronic plate CAME Zl56, used as replacement in sectional engines CAME From the V900e series, it has been definitively removed from the manufacturer's catalog. Spare part not available Currently, the plate CAME ZL56 is discontinued And there is no compatible electronic plaque that allows it to replace it...

Product added to wishlist

This website uses proprietary and third-party cookies to improve our services and display advertising with our preferences through the analysis of our browsing habits. To give your consent when you press the Accept button.

Best sellers

Motor corredera Nice ROBUS 600 HS

Hydraulic engine oil EMFA MAP (2 liters)

KIT engine Nice SPIDER 1200BL for sectional doors with integrated WiFi

Surface photocells V2 DFN to embed self-aligning and synchronized

Sectional motor base housing Nice SPIN

Vulcano 1000/1200 N Media Sectional Motor for Sectionable Doors up to 18m²

Key unlocking sliding motor FAAC 746/844

Machinery for making pulp of fibrous cellulosic material

Transformer Motorline 230Vac at 20V with 150VA and 4A

Connection device DEA "NET-NODE 2.0" power plant programming with Smartphone

Sliding engine Nice ROBO600 for residential cancellations

Electronic plate CAME & MOTOSTAR XS100

I 'm in charge of the garage

LED strip CAME in red / green for barrier mast Gard

Tractor DEA SPACE

Box button pusher with 3 buttons (Open-Close-Stop)

Table of manoeuvres DITEC LCU40H for 1 or 2 motors at 24 Vdc with display programming

Vertical electric lock BFT "EBP AC A' of 230 V

Other bars and rods CAME CGZ6 module 6 of rolled steel 30x30X1000 mm

Pinon Z16 FAAC for slide 746 and 844 engines

Magnetic loop detector Erreka LBUC (Carlo Gavazzi) at 230Vac for 1 or 2 loops

Table of manoeuvres Aprimatic SC230 analogue for electro-mechanical operators of 230 V

CAME insertion of safety bolt

Electronic plate CAME ZL56 for 24V V900E sectional engine

Filter by

Categories

Price

Manufacturers

Home