Best sellers

Showing 1225-1248 of 2043 item(s)

Sliding Gate Motors

Sliding engine EMFA "COMEC 20 HE' for industrial doors up to 2000 kg

205066

Sliding engine EMFA "COMEC 20 HE' for industrial doors up to 2000 kg. Version electromechanical 230Vac with built-in display. The COMEC 20 HE engine has the oil bath gearbox, prepared for intensive use and self-ventilated.

Parking controls

I'm in charge of the garage FAAC OTHER

FAAC

7873891

€34.71

Garage crew FAAC TM1433DS binary at 433 MHz. The encoding of this emitter is done by a combination of 12 dip switches.

Swing gate accessories

Mechanical stop in beating motor lock V2 STARK3

162258

€14.00

Mechanical stop in beating motor lock V2 STARK THREE.

Flashlights

Lamps and lighting fittings BFT RADIUS LED 24V

BFT

D114094 00003

€34.00

Flashing light without built-in antenna for motors with 24 V power supply. The flashing signal light for automatic cancellation, RADIUS LED of BFT, 24 V without built-in receiving antenna. Thanks to LED technology, energy consumption is reduced by approximately 80% compared to models with traditional incandescent bulbs, while the product life is extended....

Bluetooth receiver Nearkey with Android and iOS access...

Bluetooth receiver Nearkey with Android and iOS access... 2

GSM, Bluetooth and WiFi modules

Bluetooth receiver Nearkey with Android and iOS access control

MEDVA

A240.35010.00

€183.00

Nearkey is an access control device mainly applied to the opening of electric doors and push buttons and buttons using the smartphone and Bluetooth technology.

Radio band system Motorline MX14 and MR14 for...

Radio band system Motorline MX14 and MR14 for... 2

Safety belts

Radio band system Motorline MX14 and MR14 for anti-crushing rubber

Motorline

MR14 + MX14

€88.00

The MX14 and MR14 devices are a solution developed for the prevention of automated vehicle accidents, as required by EN 12978.

Tubular transmitters & accessories

Niceway command 1 drive open-stop-close

Nice

WM003C

€35.00

Module for the operation of 1 automatic open-stop-close in single or multi-group mode.

Receiver card adapter connection 6 pins with output 4 pins

Receiver cards

Receiver card adapter connection 6 pins with output 4 pins

Tecnoparking

ADAPTADOR 6P/4P

€15.00

Other, of circular cross-section for steering wheels with connection 6 pins with output 4 pins other, of circular cross-section Clemsa Mutant code is RNE248.

Radar and sensor glass door

Sensor FAAC XV1 with dual technology for movement and presence

FAAC

440000105108

€155.00

Sensor FAAC XV1 with dual technology for movement and presence. Aperture and security in one sensor. Safety control according to EN 16005

RFID readers and keys

Casing or adapter Clemsa AD2000 for RFID readers CK40, CK42

Clemsa

130000141603

€8.00

Casing or adapter Clemsa AD2000 for RFID readers of models CK40, CK42.

Manufacture from materials of any heading

Safety photocell Erreka Anti-vandalial adjustable industrial LFTIND

Erreka

LFTIND

€146.00

Industrial photocell Erreka LFTIND and anti-vandalic, designed for the protection of automatic doors, barriers and industrial accesses. The set is formed by a transmitter and a receiver housed in a metal aluminum housing, robust and stagnate. The photocell Erreka Lftind Detects the infrared beam interruption and sends a signal to the control panel by...

Swing Gate Motors

Engine buried Nice L-Fab HS for rapid actuation of swing doors up to 4 m

Nice

L-Fab HS

€443.00

Engine buried and removable Nice L-Fab HS at 24 V for rapid operation of sliding doors up to 4 m. It incorporates magnetic encoder and mechanical stoppers. Ideal for intensive use and fast manoeuvres (aperture 90o in approximately 6 sec)

Swing gate accessories

Enclosure Erreka Stainless steel NHENC

Erreka

NHENC

€29.00

Enclosure for double swinging door allowing the first sheet to be fixed to the ground once the second sheet has been closed.

Replacement plates

Table of manoeuvres Nice OGA2N for SHEL75KCE sectional engine

Nice

OGA2N

€85.00

Table of manoeuvres Nice OGA2N at 24V for SHEL50KCE, SHEL60KCE and SHEL75KCE sectional motor. What. The plate has a built-in receiver at a frequency of 433.92 MHz and functions of automatic shutdown, motion regulation and reversal of motion in case of obstacles during travel.

Roller Garage Door Motors

BiMotor Forsa UNIKO R-60 2M Without electric brake for roller shutters up to 153 kg

Forsa

SAT012

€281.00

Bi-engine Forsa Unless otherwise specified in the EU-type examination certificate, the requirements of this Regulation shall not apply for roller shutters up to 153 kg. As a result of the tireless search for improvements in the functional characteristics of our automatic doors and thanks to innovative construction solutions, we present a team capable of...

Overhead door accessories

Motor support Hydom ROTOR UNIC for revolving doors

HYDOM

9940/85

Support for the installation of the Hydom ROTOR-UNIC engine in tilting doors.

Replacement plates

In the case of vehicles of categories M1 and N2 with a maximum mass not exceeding 2000 kg:

Nice

RUA1

€183.00

This is the NICE RUA1. Control electronic plate RUN 1800 / RUN 2500 for sliding motors of automatic doors and entry gates weighing up to 1800 kg and 2500 kg in its two versions with this model of control manoeuvring box for a totally safe and efficient configuration of its functions thanks to this control centre

Engine Nice Slight with integrated central and absolute...

Engine Nice Slight with integrated central and absolute... 2

Sliding Gate Motors

Engine Nice Slight with integrated central and absolute encoder for sliding doors up to...

Nice

SLH400

€358.00

Engine Nice Slight with integrated control unit and absolute encoder for sliding doors up to 400 kg and 6 m in length.

Sectional Door Motors

Electromechanical engine V2 ATRIS 24V irreversible for sectional and tilting doors up...

ATRIS

€229.00

Electromechanical engine V2 In the case of ATRIS 24V of a kind used in motor vehicles up to 15m2, with a starting force of 1000 N (100 kg)

Home

Engine Novelforis for use in the manufacture of motor vehicles

Novelforis

NF-EMBA

€85.00

Motor centre axle NF-EMBA SERIES for use in the manufacture of products falling within heading 8528 [1], ideal for powering commercial doors or private garages. The electro-brake brakes the blind once it's closed and avoiding opening it manually. The motor includes the auto brake unlock (black cable), to be able to activate the blind in case of lack of...

NICE TOONA 5 engine for swing doors up to 5 m

Swing Gate Motors

NICE TOONA 5 engine for swing doors up to 5 m

Nice

TOONA 5

€327.00

Electromechanical engine NICE model TOONA 5external mounting for residential swing doors with blades up to 5 metres. Also available in 24Vdc version, with magnetic encoder.

Sectional Door Motors

Motor roof head BFT "TIZIANO' 600 N for sectional doors of up to 10 m2

BFT

P915199 00002

€163.00

Operator BFT "TIZIANO B GDA 260 S01' for sectional garage doors with a tensile strength of 60 kg and heavy duty. What. Area of the door 10 m2. Opening speed 6.6 m/min. D-Track NotesThe following: this product consists only of the engine head, intended for replacement. If you need all the material to drive a section door, we have the FRENCH KIT.

Software engineer Nice O-Box multifunction with software...

Software engineer Nice O-Box multifunction with software... 2

Repeaters

Software engineer Nice O-Box multifunction with software for programming transmitters...

Nice

O-BOX

€315.00

O-Box is the multifunctional interface that, through the dedicated software O-Box Software Suite”, allows you to configure and program directly with a PC or PDA, in a simple and intuitive way, transmitters and receivers other, of circular cross-section Nice.

RFID readers and keys

Receiver base + decoder Erreka for RFID proximity keys

Erreka

TAGBASE-250

€86.00

Receiver base + decoder Erreka TAGBASE-250 for proximity keys RFID. Interface relay for plug-in receiver power supply 230Vac or 12-24Vac/dc

Product added to wishlist

This website uses proprietary and third-party cookies to improve our services and display advertising with our preferences through the analysis of our browsing habits. To give your consent when you press the Accept button.

Best sellers

Sliding engine EMFA "COMEC 20 HE' for industrial doors up to 2000 kg

I'm in charge of the garage FAAC OTHER

Mechanical stop in beating motor lock V2 STARK3

Lamps and lighting fittings BFT RADIUS LED 24V

Bluetooth receiver Nearkey with Android and iOS access control

Radio band system Motorline MX14 and MR14 for anti-crushing rubber

Niceway command 1 drive open-stop-close

Receiver card adapter connection 6 pins with output 4 pins

Sensor FAAC XV1 with dual technology for movement and presence

Casing or adapter Clemsa AD2000 for RFID readers CK40, CK42

Safety photocell Erreka Anti-vandalial adjustable industrial LFTIND

Engine buried Nice L-Fab HS for rapid actuation of swing doors up to 4 m

Enclosure Erreka Stainless steel NHENC

Table of manoeuvres Nice OGA2N for SHEL75KCE sectional engine

BiMotor Forsa UNIKO R-60 2M Without electric brake for roller shutters up to 153 kg

Motor support Hydom ROTOR UNIC for revolving doors

In the case of vehicles of categories M1 and N2 with a maximum mass not exceeding 2000 kg:

Engine Nice Slight with integrated central and absolute encoder for sliding doors up to...

Electromechanical engine V2 ATRIS 24V irreversible for sectional and tilting doors up...

Engine Novelforis for use in the manufacture of motor vehicles

NICE TOONA 5 engine for swing doors up to 5 m

Motor roof head BFT "TIZIANO' 600 N for sectional doors of up to 10 m2

Software engineer Nice O-Box multifunction with software for programming transmitters...

Receiver base + decoder Erreka for RFID proximity keys

Filter by

Categories

Price

Manufacturers

Home