Control Panels

Showing 49-72 of 156 item(s)

In the case of vehicles of categories M1 and N2 with a...

In the case of vehicles of categories M1 and N2 with a... 2

Control Panels

In the case of vehicles of categories M1 and N2 with a maximum mass exceeding 2000 kg:

MC200 is an electronics switchboard enabling the control and operation of a motor for the automation of a blind, or a sliding door, or a sectional door, or a curtain, or other similar applications. Compatible with the IT4WIFI module to be able to open and close via a mobile device (Android or iOS) thanks to the built-in WiFi connectivity.

Control Panels

Control panel CLAS1 Clemsa for rolling blinds

Clemsa

300000001518

€99.00

Control panel CLAS 1 for rolling stock and 230V blinds. What. Maximum operating power 750W. Programming by pulse.

Control Panels

Table of manoeuvres Pujol SENIOR II PRO 230V for two-bladed swing doors

Pujol

P9CTRL0295

€152.00

Table of manoeuvres Pujol SENIOR II PRO 230V for two-bladed swing doors, with a receiver for up to 255 users and a built-in antenna.

Central command Nice Moonclever MC824 for one- or...

Central command Nice Moonclever MC824 for one- or... 2

Control Panels

Central command Nice Moonclever MC824 for one- or two-motor vibrating counters with...

Nice

Moonclever MC824

€181.00

Central command Nice Moonclever, for 24 Vdc swing door gearboxes with magnetic encoder, with technology Nice BlueBUS compatible with the Solemyo solar power system and the Opera system for the management, programming and diagnosis of automations, even remotely.

Control Panels

KIT Manual box PUJOL JUNIOR with built-in 433MHz receiver for roller shutters + 2 controls

Pujol

JUNIOR-KIT

€65.00

PUJOL JUNIOR 230Vac single-phase control panel for blinds or retractable doors incorporating a receiver open source radio frequency compatible with PUJOL VARIOCODE transmitters at a frequency of 433 MHz. Content of the KIT: manoeuvring table PUJOL JUNIOR + 2 controls with cover with code VARIOCODE.

Control Panels

Table of manoeuvres Clemsa CLAS 60 for revolving doors and sliding doors at 230 V

Clemsa

300000001611

€104.00

Control panel Clemsa CLAS 60 for rolling and sliding actuators 230V. What. Maximum operating power 1000W. Programming by display.

Control panel Clemsa with a receptor (CR 81) for Mutancode - Figure 1

Control Panels

Control panel with built-in receiver Clemsa CR81 (433 MHz) or CR81.8 (868 MHz) for...

Clemsa

CLEMSA CR

€99.00

Control panel with built-in receiver Clemsa CR81 (433 MHz) or CR81.8 (868 MHz) for retractable closures.

Table of manoeuvres AERF "Dual 2H4' with built-in...

Table of manoeuvres AERF "Dual 2H4' with built-in... 2

Control Panels

Table of manoeuvres AERF "Dual 2H4' with built-in receiver for 1 or 2 230 V vibrating...

AERF

DUAL 2H4

€92.00

Gearbox for 2 engines powered at 230 Vac in a simplified version with integrated radio, designed for the control of two motors (hydraulic or electromechanical), allows to program different times of gaps in opening and closing, force regulation and programming of the soft stop at the end opening and closing maneuver, incorporates light indicators in the...

Control Panels

SMART-D201 manoeuvring chart for 24 V motors

Erreka

SMART-D201

€181.00

Table of manoeuvres Erreka Digital SMART-D201 for 1 or 2 motors pulsing at 24Vdc and electric lock output. The SMART-D201 table is valid for DC motors: TEMIS, KAIROS and ARES.

Control Panels

Control panel Clemsa CLASS 5 for sliding, sliding and folding doors

Clemsa

300000000298

€217.00

The Control Panel Clemsa CLASS 5 is designed to govern automatic doors of intensive use, sliding, tilting and folding type with 1 and 2 blades, with single and three-phase drives of 230 V AC or 380 V AC and up to 1500 W of power.

Control Panels

Control panel Clemsa CLASSE 6.1 for 230V or 400V tilting and sliding actuators

Clemsa

300000001697

€210.00

Programmable control panel. Rolling and sliding actuators 230 V or 400 V. Max. 1500 W.

Table of manoeuvres AERF SIMPLY with built-in receiver...

Table of manoeuvres AERF SIMPLY with built-in receiver... 2

Control Panels

Table of manoeuvres AERF SIMPLY with built-in receiver for 230V retractable motor

AERF

SIMPLY

€47.00

Table of manoeuvres AERF SIMPLY with built-in receiver for 1 230V motor designed to drive centre axle rollers with a maximum power of 736W and planned for the end of the race. Open source built-in receiver the keeloq type at 433,92 MHz (SIMPLY 1H4) or 868 MHz (SIMPLY 1H8).

Control Panels

PUJOL JUNIOR control panel with built-in 433MHz receiver for roller shutters

Pujol

JUNIOR

€45.00

PUJOL JUNIOR control panel for roller shutters incorporating a receiver open source radio frequency compatible with PUJOL VARIOCODE transmitters with a frequency of 433 MHz

Control Panels

Table of manoeuvres Erreka CLEVER01 for roller shutters

Erreka

CLEVER01

€52.00

Analogue chart Erreka CLEVER01 230Vac for rolling shutters, with outlet power for peripherals 24Vac and programmable auto-lock settings. The CLEVER01 manoeuvring frames are designed to be part of rolling door automation systems, driven by a single-phase motor with permanent condenser. The actuator shall have running ends.

The NICE MINDY A01 manoeuvre chart for the rolling shutter - Figure 1

The NICE MINDY A01 manoeuvre chart for the rolling shutter - Figure 1 2

Control Panels

NICE MINDY A01 control panel for roller shutters

Nice

A01

€45.00

NICE A01 manoeuvring chart of 230 Vac, for single-phase motors with retractable doors, not automatically closed. It incorporates a RollingCode 433.92 MHz receiver for the Flo, FloR and Smilo transmitters. BOX NICE A01 HAS BEEN REPLACED BY THE NEW MODEL MC200, CLICK HERE TO SEE IT.

KIT Special 220V receiver base for electric locks (door...

KIT Special 220V receiver base for electric locks (door... 2

Control Panels

KIT Special 220V receiver base for electric locks (door openers)

KIT RSBTRC220/C

€120.00

Special 220V receiver base for electric locks or electric locks. What. It has independent terminals for output at 12Vac, 12Vcc or 24Vcc. Ideal for controlled door opening (doors, office, etc.), controlled by remote control, or by an external button.

Table of manoeuvres Erreka VIVO to power swing and swing...

Table of manoeuvres Erreka VIVO to power swing and swing... 2

Control Panels

Table of manoeuvres Erreka VIVO to power swing and swing doors

Erreka

VIVO

€172.00

Range of maneuvers Erreka VIVO to power sliding, sliding or tilting doors with 1 or 2 actuators at 230Vac or 24Vdc. VIVO frames do NOT incorporate a built-in receiver, but are iRRE2 and IRRE2/250 plug-in receivers are compatible to be operated by radio frequency with KUMA or IRIS transmitters.

Table of manoeuvres AERF "CONFORT 1H0' for a 230V motor...

Table of manoeuvres AERF "CONFORT 1H0' for a 230V motor... 2

Control Panels

Table of manoeuvres AERF "CONFORT 1H0' for a 230V motor (tipping, swinging or sliding)

AERF

CONFORT 1H0

€72.00

Manoeuvre chart COMFORT 1H0 for 1 motor at 230V ideal for tilting motors, single-bladed lathes, slides or roller shutters, with force regulation and smooth stopping at the end of opening and closing maneuvers, ease of programming and light indicators at control inputs make it very versatile and practical for most automatic systems. Box is not equipped...

Safety Accessories

Autonomous capacity counting and control system

Clemsa

KIT AFORO

€357.00

System to control capacity a business, office, swimming pool or commercial premises in a simple and intuitive way. Autonomous operation. What. All you have to do is type in the maximum capacity you want for the establishment.

Control Panels

Table of manoeuvres DEA NET24N/C with screen for 1 or 2 24V motors

DEA SYSTEM

678261

This is a universal maneuver chart DEA NET24N/C with screen and box 100 G, for 1 or 2 24 V DC motors, with or without magnetic encoder. One-step selection of the type of engine used (slide, swing, tilting, barrier, sectional door, pylon), with automatic configuration of all inputs/outputs and usage parameters. Factory setting for sliding doors.

Control Panels

Table of manoeuvres Nice MC800 for 230 V swing door motors

Nice

MC800

€137.00

Table of manoeuvres Nice MC800 for 230 V swing door motors with BlueBUS technology and Opera system. With technology Nice BlueBUS, compatible with the Opera system, for the management, programming and diagnosis of automation, also remotely. Compatible with the Opera system which, through the O-View multifunction screen, allows you to customize the...

Central command Nice Moonclever MC424L for one- or...

Central command Nice Moonclever MC424L for one- or... 2

Control Panels

Central command Nice Moonclever MC424L for one- or two-engine, non-coding, with...

Nice

Moonclever MC424L

€175.00

Central command Nice Moonclever MC424L for 24 Vdc sliding door motors, without encoder, with integrated receiveror and ready for Opera and Solemyo system.

Control Panels

Control panel CAME ZM3E multi-function for two-bladed swingers

CAME

002ZM3E

€220.00

Control panel CAME ZM3E multifunction 230V for two-bladed displays signalling graphics, self-diagnosis of safety devices and built-in radio decoding.

Control Panels

Control panel CAME ZL DE 24V with graphic display for swinging candles

CAME

CAME ZL

€0.00

Control panel CAME ZL OF 24V with a graphic display for swinging candles.

Product added to wishlist

This website uses proprietary and third-party cookies to improve our services and display advertising with our preferences through the analysis of our browsing habits. To give your consent when you press the Accept button.

Control Panels

In the case of vehicles of categories M1 and N2 with a maximum mass exceeding 2000 kg:

Control panel CLAS1 Clemsa for rolling blinds

Table of manoeuvres Pujol SENIOR II PRO 230V for two-bladed swing doors

Central command Nice Moonclever MC824 for one- or two-motor vibrating counters with...

KIT Manual box PUJOL JUNIOR with built-in 433MHz receiver for roller shutters + 2 controls

Table of manoeuvres Clemsa CLAS 60 for revolving doors and sliding doors at 230 V

Control panel with built-in receiver Clemsa CR81 (433 MHz) or CR81.8 (868 MHz) for...

Table of manoeuvres AERF "Dual 2H4' with built-in receiver for 1 or 2 230 V vibrating...

SMART-D201 manoeuvring chart for 24 V motors

Control panel Clemsa CLASS 5 for sliding, sliding and folding doors

Control panel Clemsa CLASSE 6.1 for 230V or 400V tilting and sliding actuators

Table of manoeuvres AERF SIMPLY with built-in receiver for 230V retractable motor

PUJOL JUNIOR control panel with built-in 433MHz receiver for roller shutters

Table of manoeuvres Erreka CLEVER01 for roller shutters

NICE MINDY A01 control panel for roller shutters

KIT Special 220V receiver base for electric locks (door openers)

Table of manoeuvres Erreka VIVO to power swing and swing doors

Table of manoeuvres AERF "CONFORT 1H0' for a 230V motor (tipping, swinging or sliding)

Autonomous capacity counting and control system

Table of manoeuvres DEA NET24N/C with screen for 1 or 2 24V motors

Table of manoeuvres Nice MC800 for 230 V swing door motors

Central command Nice Moonclever MC424L for one- or two-engine, non-coding, with...

Control panel CAME ZM3E multi-function for two-bladed swingers

Control panel CAME ZL DE 24V with graphic display for swinging candles

Filter by

Manufacturers

Price

Type of frame

Control Panels