1 channel module for the operation of 1 automatic with step-by-step function (Open-Stop-Closure).

Hydraulic motor FAAC 400 to 230 V for swing doors of 2,2 m to 7 m per sheet. What. Ideal for powering residential or community doors.

Engine Nice Electromechanical SUMO 24Vdc for sectional doors and sliding doors of up to 35m2.

A voltage of not more than 300 V, of a kind used in motor vehicles. What. Ideal for heavy use.

Electromechanical engine Clemsa AC14C (up to 1400 kg) and AC20C (up to 2000 kg) for industrial doors with built-in magnetic track terminals and centre.

Replacement motor electronic plate Pujol P1 three-phase.

Notes: the product does not come with the housing, it only includes the electronic board.

Other, of circular cross-section DEA SPACE N.

Table of manoeuvres Beninca BRAINY for 1 or 2 actuators at 230 V ideal for swinging, sliding or swinging doors.

Fast unlocking lever for internal placement for rolling motor TRIK SHUT UP.

MFC race finishes by NC/NO or NC/NC micro-breakersdesigned for garage automation.

Wall support for flashing lamp CAME I KNOW.

Suitable for outdoor use (outdoor and waterproof).

Flashing light without built-in antenna for motors with 24 V power supply.

The flashing signal light for automatic cancellation, RADIUS LED of BFT, 24 V without built-in receiving antenna. Thanks to LED technology, energy consumption is reduced by approximately 80% compared to models with traditional incandescent bulbs, while the product life is extended. Possibility to install on a surface (such as a pillar or column) or on the wall using the special accessory. Grade of protection IP44.

Telescopic straight arms BFT CAS1 for tilting operator BERMA.

• Telescopic pair length 1000 mm
• Machinery for making pulp of fibrous cellulosic material 2x2000 mm

NET-BOX is the bank programmer that reads, clones and customizes issuers and switchboards for doors quickly and accurately.

It's the programmer that allows you to manage the radio controls.

Box FAAC XK30 with unlock lever ideal for revolving doors to unlock the electro brake.

Other, of circular cross-section Aprimatic RX1E 433 MHz for manoeuvre frames of the Apricode series with a capacity of 1000 codes.

It has four programming modes: Autocoding, Common Code, Urbanization Mode and Access Control.

Rolling code can be enabled by a jumper.

Modular receiver Aprimatic RX4MF 433 MHz 4-channel, fed at 24V with 70 code capacity.

It allows use of 4-channel remote controls and selection of mono-stable or bi-stable operating mode for each channel separately.

Engine FAAC Reversible and irreversible version for community sliding doors for heavy use.

Rubber bumper for Barrera Nice 1 metre per unit.

Telescopic masts Motorline ZUMA without LED lights.

Designed as a comprehensive solution, the ZUMA barrier was developed with an extendable mast in different sizes as needed to promote easy and efficient transport.

We highlight the innovative mast application system, in which from a model it is only possible to transform the barrier to the left or right, which allows for efficient stock management.

In terms of finishing quality, it goes through the process of galvanizing and lacquering, ensuring greater durability to the product.

The barrier universe has been renewed!

Manufacture from materials of any heading CAME DLX synchronized infrared beams up to 30m.

Support or mounting plate Medva CS HB1 C+P with anchor bolts.

For the purposes of this Regulation, the following definitions shall apply:.

Motor gearbox CAME ATS in 230V and 24V irreversible format for swinging canopies with a leaf length of up to 5 metres. ATS actuators are ideal for powering residential (230V) and semi-intensive (24V) community folding doors.

KIT Electromechanical engines DITEC PWR35H 24V for heavy use swing doors with a leaf length of up to 3.5 metres.

The irreversible actuator DITEC The 24Vcc PWR35H is intended for frequent and heavy use. With machinery for making pulp of fibrous cellulosic material.

Table of manoeuvres CAME ZL55 for use in the manufacture of motor vehicles, used in roof actuators of the VER series (V600 and V700). Incorporates connector to add additionally a radio frequency receiver model AF43S (not included).

" The ZL55 plate is decatalogada, it is recommended to acquire the head of the VER10PLUS which can be adapted to the guide of a VER600/VER700. "

Pre-mounted guide for use on sectional engines V2 ATRIS. What. Available in chain version.

Pump and key unlock V2 GOLD 171301-MCR002

DOES NOT INCLUDE THE HANDLE

I command Aprimatic 5 channel Revolux Wireless for tube or pipe engines series Aprimatic The Revolution.

Lock for horizontal swinging doors.

KIT Electromechanical engine V2 "ATRIS 700' Irreversible 24 V other, of circular cross-section, of iron or steel, with a starting force of 700 N (70 kg).

Infrared radar Forsa New EVOLUS/NEPTIS Dual technology with sensitivity adjustment.

Central Motorline MC4 EVO developed for TUB and ROLLING roller motors up to 750W, with technology to be powered from 100Vac to 230Vac.

Its small size allows it to be installed in smaller spaces and with screwless connectors to increase speed and ease of connection.

Vertical enclosure for VIRO lock, thinking to block swing doors with ground lock.

Jofemar cable to connect to receiver GM VENDING.

Electronic plate Beninca "CP.J3-SW' for sectional motors of the 24 V JM series.

Motor gearbox Pujol Marathon DC 700

Replacement joint engine output axle CAME BXL BXL04AGS OTHER.

Medva "FULL PRO FC" manoeuvre board for 1 or 2 230V actuators with encoder and electric lock output.

Floor central enclosure for tilting doors of 1 sheet Erreka NPE307

Motor unlock axle Pujol Marathon two.

Replacement leather key ring PC ROLL V48

Table of manoeuvres Forsa-SEA 'Gate 1 DG' for electro-mechanical operators of 230 V. What. The Gate 1 electronic board can be continuously updated and customized when combined with the Jolly Programmer module. Its comprehensive features include a dedicated 8K2 security edge input, encoder and boundary switch support.

The plate has a display to perform parameter configuration and programming adjustment of paths and actuator force.

Automatic hydraulic piston DMIL/FORSA KAPPA for heavy use, designed to delimit access on public roads, in communities, in enterprises, or in any area where it is required to manage intensive access.

Kit Transmission system BFT THE NUMBER OF BOTTLES IS 850-1250.

Totem for installation of accessory equipment at access points for passenger carsfor the purposes of this regulation, the following definitions shall apply:.

Surface element installation plate for the installation of embedded devices. On the inside disone of installation trays, support for installation of dIN rail and cable guide.

Other, of circular cross-section Beninca ONE.2WI 433,92 MHz of 2 channels with triple coding: Advanced rolling code, rolling code and fixed code.

Ability to memorize up to 512 codes. Learning the coding after the first transmission with the transmitter.

Sliding engine BFT "DEIMOS AC' electro-mechanical 230Vac for residential households up to 600/800 KG with electro-mechanical end of run.

The "DEIMOS AC" operators are ideal for motorizing residential doors with a speed of 9 m/min, they are easy to install thanks to their programming by trimmer and DIP switch. The end of the race is electromechanical.