Damper with regulation and magnet Medva"CIL3095" with 95mm stroke designed to dampen the closures of industrial sliding doors.

The linear damper CIL3095 – CIL30120 reduces the speed of the door during the final stretch of the tour, avoiding sudden knocks and personal injury. The speed can be adjusted according to the need of the installation. The shock absorber is automatically charged by the neodymium magnet each time the door is opened, being operational for the subsequent closing cycle.

Motor gearbox FAAC D1000 / GENIUS ZODIAC 100 / CLEMSA AS60-120

Table of manoeuvres Erreka RINO Inverter is 230V.

Other, of circular cross-section CAME MONDRIAN 4

Box battery 24V Nice PSY24 with control circuit and transport handle, intended for use with the Solar Solemyo KIT.

Chain coupling with couplings Erreka NAOS and MAXI.

Garage control Clemsa 4-channel Mutancode model N4, Rollingcode 433 MHz.

Rollable door motor PUJOL Model Winner Pro 600/200 designed to automate roller blinds of garages and commercial premises, with lifting capacity of up to 170 kg.

The Winner Pro engine incorporates electrofrenor and is designed for axes of 48 / 60mm and pulleys of 200 / 220mm.

PUJOL MARATHON PRO II and III sliding motor plastic housing. Compatible also with the old models MARATHON and MARATHON DC.

Tractor Nice SPIDER for sectional engines Nice SP6065, SP6000 and SP6100.

Metric screws 5x40 for adaptation of Guides Nice SPIN in heads Nice SPIDER.

Hydraulic motor Erreka 230Vac ATLAS for residential or community intensive use for doors up to 15 m2 with an obstacle detection system. Available in reversible or irreversible versions and with anti-lock system.

Engine Erreka TORO for heavy residential, community or industrial sliding doors up to 1800 kg or 2500 kg with programmed cruising and deceleration, easy unlocking and magnetic race ends.

Nice Era Keypad wireless is a wireless 13-key keyboard with radio frequency connection compatible with series receivers Nice FLO.

KIT Sliding engine Clemsa "AC562N" electromechanical 230 V for residential doors up to 500 kg. It incorporates a manoeuvre chart CLAS62C. The actuator has magnetic running ends, levered unlock system, aluminum body painted with polyester powders and ABS crankcase. in addition, thanks to its anti-crush system and smooth stopping we will have an engine with reliability and maximum precision.

Lock and key

LED flashing light in version 90-240 Vac and 12-36 Vdc with an integrated 433,92 MHz antenna.

A one-channel receiver operating in both mono-stable and bi-stable mode, capable of storing up to 500 12-bit or Rolling-Code codes.

It's only compatible with the controls Motorline model FALK and MX4SP.

GO DMIL garage transmitter with 2 channels at 868 MHz.

The new emitter can be activated with a previously memorized control or by recording it directly on the receiver button.

KIT 24V engine DEA model TEO 700 of 1000N, designed to drive other, of circular cross-section. What. It is the manufacturer's cheap and easy to install solution DEA.

Digital manoeuvring chart V2 CITY2+ 230 V for sliding doors and doors equipped with two 24 V direct current motors.

Electromechanical motor Forsa Erg 24V for tilting doors of two residential counterweight leaves, designed to automate cancels up to 10 m² with maximum safety and control.

The Forsa Erg 24v It incorporates technology with Encoder and finishing microswitches in opening and closing, offering precise, smooth and reliable operation. It has an anti-explashing system, unlocking manual by cam lever and Integrated maneuver box, guaranteeing security and continuity of service even in case of current cut.

Proximity reader Nice IT WAS A TRANSPONDER READER for cards and badges with a transponder.

Motor head EMFA MTCH of 800N and 1,000N with built-in receiver box for residential sectional doors.

Receiver FAAC RP 868 SLF plugged in, fast-coupling (compatible with all electronic devices FAAC of a kind used in motor vehicles 5 pin rapid coupling, or external utility by connecting to the interface of the accessory RP relay).

Traffic light Motorline MS01 red-green LED colours which can be managed by MCS01. It has green/red LED lamps and the lenses are 124 mm in diameter. Rotate 200° and allow in M20 cables.

Probe cable for PC-Copy machine with 3 and 4 pin outputs for fixed and evolutionary codes.

OXYGEN SARGON 230 V electromechanical motor for residential swing doors up to 4 m in length per sheet.

The SARGON series engines have a 400 mm stem and are designed for use in lightweight doors up to 250 kg.

Tube motor Erreka SINE Ø35 AND Ø45 for household blinds, curtains and awnings up to 118 kg.

This complete range is completed by up to four different references for domestic blinds, roll-over curtains and awnings. For octagonal tubes from 40 mm to 60 mm, end-of-course system with variable path adjustment and low noise level, with accessories for installation.

24 V hydraulic motor BFT "FAST ULTRA BT A' for hinged doors of heavy use up to 5 metres in length. It incorporates a selectable locking system and magnetic run ends.

Full range of highly intensive use oleodynamic pistons, suitable for any type of application: residential, industrial or community.

Hydraulic oil Clemsa/FAAC in a 2-litre bottle.

KIT Sliding engine BFT "DEIMOS ULTRA BT A" 24V electromechanical for charges of up to 400/600 KG with intensive use and magnetic run ends.

Silentbloc rear rubber hood hydraulic engine swing Hydom 3LC.

Sectional motor skate replacement DEA THAT'S SEVEN HUNDRED.

Engine Nice SPIDER 800 for sectional doors up to 11.4m2 or for a sheet of up to 12,6m2.

Equipped with integrated central and bidirectional receiver. System Wi-Fi with the device "BiDi WiFi" able to control automatism through the MyNice application, compatible with Android and iPhone.

SPIDER can also be integrated into the dometic ecosystem Yubii for use with devices Nice or third parties. The control will be done with the Yubii application along with other devices that have integrated into the ecosystem.

Microwave radar ideal for doors large and high ceiling locations, which can be installed up to 7 m high. Account with technology detection able to differentiate people and vehicles, reducing unwanted openings, thus saving energy loss.

Garage control Forsa Compatible with sectional engines Delta810 and Delta812, Frequency 433MHz.

Communicator Motorline M250 with integrated microsim data card that allows controlling devices remotely in real time, even in places without internet access by Wi-Fi or cable.

Possibility of access, from anywhere in the world, to all the functionalities of the device through the Mcontrol App.

Quartz transmitter Aprimatic tG2C model of two channels, fixed code, quartz to frecuencua 27.195 MHz. Programming by placing dip-switch.

Programmable control panel. Rolling and sliding actuators 230 V or 400 V. Max. 1500 W.

Motor kit CAME BXV06AGS at 24V for sliding doors up to 600 kg both residential and communal.

LED signalling lamp with fixed or flashing light. What. In the case of vehicles with a maximum mass not exceeding 2000 kg:. THIS IS IP 54. 90 x 190 x 75 mm

Unlock safe with NICE KIO key selector with wire pull mechanism, ideal for the unlocking of the electric brake in roll-over motors in the event of a power failure in order to operate the blind manually.

KIT swinging motor Motorline LINCE for residential cancellations. What. Models of 230 Vc and 24 Vdc for running 300 mm, 400 mm, 600 mm

Garage crew CAME the model TOP2DRBS Rollingcode frequency 433,92 MHz and 868 MHz.

Head Electric motor V2 AZIMUTH irreversible for sectional and tilting doors up to 8 m2.Starting force 500 N 50 kilos .

Product discontinued by the manufacturer. Not available for sale.

This model has been officially replaced by a more current version, which incorporates technical and functional improvements.

👉 Recommended substitute product:

Electromechanical motor ABLE SL Small for residential and community sliding doors up to 400/600/800 kg

Engine DEA GULLIVER for use in the manufacture of motor vehicles machinery for making pulp of fibrous cellulosic material.