Box battery 24V Nice PSY24 with control circuit and transport handle, intended for use with the Solar Solemyo KIT.

The engine gearbox for ERREKA IZAR IZ1C

Chain coupling with couplings Erreka NAOS and MAXI.

Garage control Clemsa 4-channel Mutancode model N4, Rollingcode 433 MHz.

Rollable door motor PUJOL Model Winner Pro 600/200 designed to automate roller blinds of garages and commercial premises, with lifting capacity of up to 170 kg.

The Winner Pro engine incorporates electrofrenor and is designed for axes of 48 / 60mm and pulleys of 200 / 220mm.

Dented helicoidal motor reducer Nice SPIN with output shaft.

Tractor Nice SPIDER for sectional engines Nice SP6065, SP6000 and SP6100.

Metric screws 5x40 for adaptation of Guides Nice SPIN in heads Nice SPIDER.

Table of manoeuvres AERF SIMPLY with built-in receiver for 1 230V motor designed to drive centre axle rollers with a maximum power of 736W and planned for the end of the race.

Open source built-in receiver the keeloq type at 433,92 MHz (SIMPLY 1H4) or 868 MHz (SIMPLY 1H8).

Hydraulic motor Erreka 230Vac ATLAS for residential or community intensive use for doors up to 15 m2 with an obstacle detection system. Available in reversible or irreversible versions and with anti-lock system.

Engine Erreka TORO for heavy residential, community or industrial sliding doors up to 1800 kg or 2500 kg with programmed cruising and deceleration, easy unlocking and magnetic race ends.

Nice Era Keypad wireless is a wireless 13-key keyboard with radio frequency connection compatible with series receivers Nice FLO.

KIT Sliding engine Clemsa "AC562N" electromechanical 230 V for residential doors up to 500 kg. It incorporates a manoeuvre chart CLAS62C. The actuator has magnetic running ends, levered unlock system, aluminum body painted with polyester powders and ABS crankcase. in addition, thanks to its anti-crush system and smooth stopping we will have an engine with reliability and maximum precision.

Lock and key

A one-channel receiver operating in both mono-stable and bi-stable mode, capable of storing up to 500 12-bit or Rolling-Code codes.

It's only compatible with the controls Motorline model FALK and MX4SP.

GO DMIL garage transmitter with 2 channels at 868 MHz.

The new emitter can be activated with a previously memorized control or by recording it directly on the receiver button.

KIT 24V engine DEA model TEO 700 of 1000N, designed to drive other, of circular cross-section. What. It is the manufacturer's cheap and easy to install solution DEA.

Digital manoeuvring chart V2 CITY2+ 230 V for sliding doors and doors equipped with two 24 V direct current motors.

Proximity reader Nice IT WAS A TRANSPONDER READER for cards and badges with a transponder.

Motor head EMFA MTCH of 800N and 1,000N with built-in receiver box for residential sectional doors.

Other, of circular cross-section V2 SENSIVA synchronized and oriented 30o.

Receiver FAAC RP 868 SLF plugged in, fast-coupling (compatible with all electronic devices FAAC of a kind used in motor vehicles 5 pin rapid coupling, or external utility by connecting to the interface of the accessory RP relay).

Traffic light Motorline MS01 red-green LED colours which can be managed by MCS01. It has green/red LED lamps and the lenses are 124 mm in diameter. Rotate 200° and allow in M20 cables.

Probe cable for PC-Copy machine with 3 and 4 pin outputs for fixed and evolutionary codes.

Key selector Beninca Two-touch TOKEY with metal housing.

OXYGEN NYX 230V motor for residential sliding doors up to 1,000 kg, with built-in box-receiver and mechanical racing ends.

The 230V NYX electromechanical motor is thought to power light or heavy doors up to 1,000 kg for residential or industrial use.

OXYGEN SARGON 230 V electromechanical motor for residential swing doors up to 4 m in length per sheet.

The SARGON series engines have a 400 mm stem and are designed for use in lightweight doors up to 250 kg.

Tube motor Erreka SINE Ø35 AND Ø45 for household blinds, curtains and awnings up to 118 kg.

This complete range is completed by up to four different references for domestic blinds, roll-over curtains and awnings. For octagonal tubes from 40 mm to 60 mm, end-of-course system with variable path adjustment and low noise level, with accessories for installation.

24 V hydraulic motor BFT "FAST ULTRA BT A' for hinged doors of heavy use up to 5 metres in length. It incorporates a selectable locking system and magnetic run ends.

Full range of highly intensive use oleodynamic pistons, suitable for any type of application: residential, industrial or community.

Table of manoeuvres Erreka RINO Inverter is 230V.

Hydraulic oil Clemsa/FAAC in a 2-litre bottle.

KIT Sliding engine BFT "DEIMOS ULTRA BT A" 24V electromechanical for charges of up to 400/600 KG with intensive use and magnetic run ends.

Sectional motor skate replacement DEA THAT'S SEVEN HUNDRED.

Microwave radar ideal for doors large and high ceiling locations, which can be installed up to 7 m high. Account with technology detection able to differentiate people and vehicles, reducing unwanted openings, thus saving energy loss.

Garage control Forsa Compatible with sectional engines Delta810 and Delta812, Frequency 433MHz.

Quartz transmitter Aprimatic tG2C model of two channels, fixed code, quartz to frecuencua 27.195 MHz. Programming by placing dip-switch.

Programmable control panel. Rolling and sliding actuators 230 V or 400 V. Max. 1500 W.

LED signalling lamp with fixed or flashing light. What. In the case of vehicles with a maximum mass not exceeding 2000 kg:. THIS IS IP 54. 90 x 190 x 75 mm

Tubular motor CAME MONDRIAN 6 (mechanical without radio) or MONDRIAN R6 (radio mechanic) of Ø 55 mm for Ø 60 mm and Ø 70 mm pipes.

With a Ø 55mm is ideal for installation in any automation of awnings, blinds, screens. being used for different tubes such as Ø 60mm and Ø 70mm round or also octagonal (possibility of use on other types of pipes and diameters), incorporates a universal head for the application of any mechanical manual stop and fixing plate with progressive screw adjustment.

Unlock safe with NICE KIO key selector with wire pull mechanism, ideal for the unlocking of the electric brake in roll-over motors in the event of a power failure in order to operate the blind manually.

KIT swinging motor Motorline LINCE for residential cancellations. What. Models of 230 Vc and 24 Vdc for running 300 mm, 400 mm, 600 mm

Garage crew CAME the model TOP2DRBS Rollingcode frequency 433,92 MHz and 868 MHz.

Electromechanical motor Forsa Erg 24V for tilting doors of two residential counterweight leaves, designed to automate cancels up to 10 m² with maximum safety and control.

The Forsa Erg 24v It incorporates technology with Encoder and finishing microswitches in opening and closing, offering precise, smooth and reliable operation. It has an anti-explashing system, unlocking manual by cam lever and Integrated maneuver box, guaranteeing security and continuity of service even in case of current cut.

Head Electric motor V2 AZIMUTH irreversible for sectional and tilting doors up to 8 m2.Starting force 500 N 50 kilos .

Product discontinued by the manufacturer. Not available for sale.

This model has been officially replaced by a more current version, which incorporates technical and functional improvements.

👉 Recommended substitute product:

Electromechanical motor ABLE SL Small for residential and community sliding doors up to 400/600/800 kg

Engine DEA GULLIVER for use in the manufacture of motor vehicles machinery for making pulp of fibrous cellulosic material.

Electromechanical engine DEA "LIVI 902' 230V or 24V for semi-intensive residential swing doors up to 9m2.

The 'LIVI 902' version does not incorporate a manoeuvre chart and the 'LIVI 905' version incorporates a digital manoeuvre chart. The engine travel is done by Encoder but optionally you can acquire the end of race system.

Product discontinued by the manufacturer. Not available for sale.

This model has been officially replaced by a more current version, which incorporates technical and functional improvements.

👉 Recommended substitute product:

Electromechanical motor kit ABLE SL Small for residential and community sliding doors up to 400/600/800 kg