Blister of the brand GP. What. Battery 27A at 12V

Central command Nice Moonclever, for 24 Vdc swing door gearboxes with magnetic encoder, with technology Nice BlueBUS compatible with the Solemyo solar power system and the Opera system for the management, programming and diagnosis of automations, even remotely.

Box receiver Forsa model CRE800 powered at 230Vac for issuers RollingCode Forsa at 868 MHz, with internal memory of 15 codes (expandable with external memory).

It allows two types of operation: step by step and man present.

Motor centre axle ACM for use in the manufacture of products falling within heading 8528, ideal for powering commercial doors or private garages.

Do not allow the engine to lock when the door is stopped or left closed, if there is no electricity, you can climb by hand. It is recommended to use in places where there is NO alternative access to the shop/garage or an external brake unlocker cannot be installed, as when there is no electric current it can be operated manually.

Operator Aprimatic Electromechanical MATICBOX at 24 Vcc for residential use in spring doors and sectional doors, chain and belt drive. What. Equipped with an automatic path recognition system, deceleration in opening and closing phases and anti-crush sensitivity.

Manufacture from materials of any heading V2 this Regulation shall be binding in its entirety and directly applicable in all Member States surface and for self-aligning and synchronised columns.

Synchronous and steerable wall photocells (180o) V2 Sensitive-WL with battery powered transmitter.

24VDC electromechanical gearmotor Nice Titan HS with magnetic encoder For the quick drive of swing gates with leaves of up to 3.7m (TTN3724HS, TTN3724RHS), and for leaves up to 6m (TTN6024HS, TTN6024RHS).

Of a thickness of V2 which prevents pedestrians from catching their fingers on the hinge edge.

Electronic plate V2 PD8M for sliding motors V2 GOLD.

The switchboard has a display for your programming, ensures safety and reliability in sliding door automations . The PD8 design has aimed at making a product that suits all needs, to achieve an extremely versatile control unit that meets all the necessary requirements for a functional and efficient solution.

The MF2020 is a column photocell developed to safeguard all types of industrial doors (sectional and fast doors) up to a maximum width of 10 metres.

The sender and receiver create a infrared grating it offers protection up to eight feet high.

When the infrared beams are interrupted, a signal is sent to the control room. After the holding area is clear, a new signal is sent to the control to indicate that the area is clear.

Digital keyboard V2 KIBO backlit model by radio In the case of vehicles of categories M1 and N2 or wired version (requires DEC4 decoder).

Garage crew Forsa Delta 4 channels at 433.92 MHz.

Brushless engine Motorline Gallo 36V, brushless, Super intensive use to motorize sliding doors that require access with high vehicle traffic.

High performance and speed 36VDC engine, for slide gate of up to 2200kg (4 Versions available).

The absence of brushes and the box Lubricated gears guarantee superintendent use With high performance.

Plastic garage control board Clemsa Mutancode Mini in grey.

A micro receiver of 12/24v of 2 channels, with capacity for 400 codes or 1,000 codes.

The configuration and management of this receiver is done with the PC-Copy Duplicator.

The motor Rotor-Unic, is a hydraulic operator for counterweight tilting doors up to 20m², Ideal for Motorize Very intensive garages.

The actuators of the Rotor-Unic Ru3D and RU3R series offer unbeatable advantages in terms of smooth and silent performance, durability and quality / price ratio.

Its advanced technical benefits make them a hundred and ideal mechanisms to automate tilting doors for intensive use.

Receiver AERF "SRM 1L4255" for outdoor use 12/24V with 1 channel, rolling code 433.92 MHz.

Wall transmitter Came model Vivaldi of 2 channels for tubular motors.

Hydraulic lock, 1.4 m whip and rotor-unic tilting rack

Manage the opening of your residential garage door with NIC's IT4WIFI WiFi moduleIt is available as standard on iPhones and available on Google Play for Android devices. The NICE IT4WIFI module is operated by Opera, only available on NICE manoeuvring frames.

Hydraulic motor EMFA Tor 2000, for heavy use swing doors of a maximum blade length of 4/6 metres (600KG/800kg), with an elegant triangular design.

Manufacture from materials of any heading Clemsa F35 mirror fed to 12/24V with retro-reflector up to 12 metres and IP66 protection.

Remote control DTM-Q to duplicate quartz emitters of Frequencies 26 MHz at 40 MHz.

* Special prices for the professional sector. Ask us to open a file.

Rechargeable battery CR2025 of 3.6V to replace BMW.

Issuer of the copy Remocon RMC165CM for fixed code duplication at 433,92 MHz and low frequency.

The duplication must be done with the machine Remocon HDC 900.

* Special prices for professionals. Contact us to open your file.

CISA bulb extender up to 80/100 mm.

Motor centre axle ACM for use in the manufacture of products falling within heading 8528, ideal for powering commercial doors or private garages.

Do not allow the engine to lock when the door is stopped or left closed, if there is no electricity, you can climb by hand. It is recommended to use in places where there is NO alternative access to the shop/garage or an external brake unlocker cannot be installed, as when there is no electric current it can be operated manually.

Hydraulic motor HYDOM MINIMAX for semi-intensive use for oversized two-bladed hinged doors (maximum 14m2). Allows manual opening and closing in the event of a power failure.

Maintenance on this engine is practically zero.

Roof motor Erreka NAOS for sectional garage doors up to 11m2 24Vdc with encoder capable of lifting up to 70 kg. What. Includes receiver for up to 20 codes.

RFID proximity card from Clemsa for the readers CK40 and CK42.

Control panel for two 230 V retractable actuators. What. Power supply 230 Vac 50-60 Hz. Maximum load of the motor 1000 W. Power lock output 12 V 2A.

The LDD loop detector can be installed in most parking, traffic and vehicle access control applications for the control of barriers, doors, bollards and vehicle access equipments . Automatic frequency tuning and simple sensitivity adjustment provide easy setup and installation. The automatic increase in sensitivity ensures reliable detection of tall vehicles.

The indication Multicolored LED allows the user to easily adjust the inductance and indicates installation problems intuitively for easy diagnosis. The user individually assigned relay mode for 2 SPDT outputs provides easy adaptation to a multitude of applications. The directional logic in the double loop version can be used

Supported cable Erreka ORION (3 threads of 0,25 mm2 + mesh).

Notes: Sold in 10 metre coils.

Hydraulic motor EMFA Global Reversible and Irreversible community sliding doors intensive use with force regulation and smooth stopping.

MCONNECT LINK is a tool for installers that allows us to configure all the parameters of your power plant Motorline through Wi-Fi either in person or remotely.

Hit the chain DEA simple 1/2 times 1/8.

Nylon/PVP basting doors brushes.

Garage handle V2 ABLE TX TOH2 433.92 MHz

Engine Pujol Marathon PRO Q II single phase for sliding doors up to 1000 kg residential, community or industrial. Equipped with electronic board and built-in receiver.

Machinery for making pulp of fibrous cellulosic material Clemsa, to detect vehicles (cars or motorcycles) when that vehicle passes over the door, it reverses the maneuver just as if we were passing in front of a photocell. A magnetic loop is also usually installed to prevent an owner from opening the door to enter on foot, therefore the door would only open if the magnetic loop detects a vehicle in the area where the winding is installed (usually in the buried ground).

Emitter of evolutionary code copy type Keeloq 433 MHz

Command for evolutionary code duplication of the Keeloq type: Clemsa Mutant code, Pujol The Vario, the NEO, BFT, Erreka, Dea, AERF, among others.

* Special prices for professionals. Contact us to open your file.

End of career Pujol WINNER PRO 600 (new model).

This end of race set is only compatible with the new WINNER PRO 600 model. It includes the electronic plate and the plastic case with the race finishes.

Magnetic motor racing finish FAAC 740 and 741.

Triangular three-key game of unlocking CAME 119RIY077

Sensor FAAC XBFA of movement and presence over infrared radiation.

The ideal security for automatic curtain doors. Aperture and security in one sensor.

Electric brakes for rolling stock Pujol Winner with 5-meter cable.

KIT engine DEIMOS BT A600, operator for sliding doors of up to 600 kg. What. Blade speed is 12 m/min. End of the electromechanical race.