Kit of mounting bracket for ROSSO EVO with a metal rod.

This kit of accessories allows the installation of automatic doors on higher ceilings.

Blister of the brand GP. What. This is a 3V CR2016 lithium battery.

Key selector Motorline SCMV150 contact start with 2 microphones and a european cylinder.

Electromechanical engine V2 Calypso irreversible at 230 V for residential sliding doors up to 4 metres.

Emissor FAAC 2-channel XT2 SLH and 868 MHz frequency.

The programming or memorization of the new Emissor must be carried out by proximity or confrontation from an original command in operation.

* Special prices for professionals. Contact us to open your file.

Garage crew MEDVA model of the vehicle with 3-channel RollingCode coding at 433.92 MHz.

Hydraulic retainer or rotary brake for sliding door with slope.

CONTROLGIRO is a rotary brake M4 Z16 (standard version) or M5 (PUJOL MARATHON PRO version) which has been developed for regulating and controlling door speed in slope facilities all the way.

NICE M4 22x22x1000 mm galvanized zipper for welding directly to the door.

The PC ROLL SUPER transmitter is a 433.92 MHz multicopy controller for fixed and evolutionary code duplication with the possibility of unifying up to 4 different issuers.

Programming is performed by the PC-Copy duplicator.

* Special prices for professionals. Contact us to open your file.

Renolin-2835 (HyDom) oil for vibrating and tilting hydraulic motors. Packed in 2 or 5 litres.

PUJOL model WINNER PRO 600/200 designed to automate rolling shutters for garages and commercial premises, with lifting capacity up to 170 kg.

The WINNER PRO engine incorporates electro brakeor and is designed for 48/60mm axles and 200/220mm pulleys.

a

Exclusive zinc-plated M4 zipper for sliding motors of the brand Pujol Put it on. Each unit consists of 1 meter of measurements 26x10 mm and comes with 3 separators.

Parking controls Oxygen VENUS three channel RollingCode 433 MHz

The command Clemsa MTH2 is an original compatible controller for 8-digit binaries and trinaries compatible with the vast majority of 433.92 MHz and low frequency off-the-shelf controllers.

For the purposes of headings 8521 to 8528.

The holder is for a standard circular reflective retro-reflective mirror for any type of mark. The diameter is 85mm.

KIT Center axle winding motor OXYGEN EOS200EB and box-receiver URANIA 433 MHz Persian Winding up to 180KG.

The lifting capacity is up to 180 KG and is designed for 48/60mm axles and 200/220mm pulleys.

Garage emitter BFT Two channels, rolling code at 433.92 MHz. What. Programming by means of a pre-programmed control or manually (depending on the receiver model).

The electromechanical actuator Erreka ARES is designed to drive automatic doors for use in the manufacture of motor vehicles.

Easy installation with two stem sizes (300mm and 400mm race), economic range, with obstacle detection and electronic soft shutdown.

Other, of circular cross-section Nice OXI BD 433,92 MHz bidirectional,with Opera system functions.

The security photocell Erreka Ft06 It is an essential device to guarantee security in door automation systems and access. Designed to Detect obstacles in the passage area, prevent accidents by stopping the closing of doors automatically if it detects the presence of People, Vehicles or Objects.

Table of manoeuvres DEA NET230N with built-in receiver, universal with digital display for 1 or 2 motors at 230 V, with or without magnetic encoder.

Single-step selection of the engine type used (slide, swing, swing, barrier, sectional door, pylon), with automatic configuration of all inputs/exits and usage parameters.

For the purposes of this Regulation, the following definitions apply: GP. What. Blister x1

Plug-in receiver card Clemsa "RNE248" frequency 433 MHz & 868 MHz, 2 channels with memory up 400 users.

The receiver can operate independently at 433 MHz or 868 MHz and is compatible with Mutan and Mutan-II broadcasters.

Electromechanical engine Erreka ORION 230Vac for swing doors two-bladed counterweight up to 20m2, available with encode or end run. What. Can be used with inside opening or outside opening.

This is a 12/24v micro-mini receiver of 1 channel, with capacity for 400 codes or 1,000 codes.

The configuration and management of this receiver is done with the PC-Copy Duplicator.

Garage crew Clemsa model MUTANcode N82 this is a 2-channel mini format, RollingCode 868 MHz.

For the purposes of this Regulation, the following definitions shall apply: Motorline MB1 coded approach.

Other, of polymers of vinyl chloridewith their corresponding housings for residential or industrial sliding motors.

MINGARDI D8 230V zipper actuator with a stroke of 300 mm to drive hanging windows, domes, shade blades, laminated windows.

D8 FCE Mingardi linear electric actuator with rigid bar movement, very resistant to peak loads.

Why EVO NOA is an all-in-one garage remote for automation, which allows you to have 4 different remote controls in just 1 (home, office, parking, etc.).

It's multi-frequency technology with both Fixed code like with rolling code.

Garage BFT 4-channel cool Mitto, RollingCode system 433,92 MHz.

Range of maneuvers Erreka VIVO to power sliding, sliding or tilting doors with 1 or 2 actuators at 230Vac or 24Vdc.

VIVO frames do NOT incorporate a built-in receiver, but are iRRE2 and IRRE2/250 plug-in receivers are compatible to be operated by radio frequency with KUMA or IRIS transmitters.

Roof motor Motorline ROSSO EVO 1000N for sectional doors up to 15m2. What. It has a modern and innovative design, standing out in any environment.

Connection receiver module for manoeuvring frames V2 / 433.92 86 868.30 MHz / Personal Pass Royal

Parts and accessories of machinery Erreka THE ORION.

The key to unlocking the ERREKA Dingo, Dolphin, Vulcan

Exclusive to sliding motors of the brand Pujol Put it on. What. Each unit consists of 1 meter of measurements 40x8 mm and comes with 3 separators.

The M5 metal zipper was formerly fitted on all MARATHON models but currently this M5 pinion zipper is only used by the 1000 kg MARATHON PRO Q II engine.

Tubular Motorline ∅45mm strength 20nm, 30NM, 40NM, 50NM for roller domestic blinds and curtains.

Engines designed for Motorize blinds and curtains, interiors or outdoor, allows the application of various accessories to work with all types of tubes.

Blister of the brand GP. What. Battery 23A at 12V

Garage command "XL AUTOMATISMOS" model MERCURI A8 VOLT coded Rollingcode (evolving) 3 independent channels at 868,35 MHz

For use in the manufacture of products falling within heading 8528, in metal and lacquered in black to properly protect from shocks, sunlight and rain.

The Sprint Low is a 24V electromechanical motor that includes a gearbox and receiver for 255 emitters. What. For residential or communal sliding doors.
It is manufactured with the highest quality products and is undoubtedly the fastest automation on the market in its placement in sliding doors as it lacks exact quotas, and thanks to its pivot pin , it always fits the zipper.

Electronic command bi-technology HF 2 channels for GRPS access control receivers.

Pinion shaft housing adaptation Erreka THE JEDI, THE NAOS, THE AZIMUT.

Garage crew Forsa model TP2 Mini with RollingCode coding system at 868 MHz.

This emitter comes with the standard code, so it won't work in garages where an installer has put in a custom code. It is 100% compatible with the receivers and receiver cards of this website Tecnoparking. Activation can be done by the receiver button or remotely by radio with a pre-programmed control.

Plug-in receiver card by 6 pin connection, free code RollingCode at 433.92 MHz. What. Capacity up to 255 codes.

Compatible with most receiver cards; JCM, Erreka, Pujol, HyDOM, Forsa, Terra, and so on

The new TOGO remote goes from Beninca uses a new 128-bit ARC encoding (Advanced Rolling Code).

The new encryption guarantees maximum security thanks to the security of the transmitted code (128 bits against the 64 of the previous TOGO).