Line-x / lbs is a couple of PHOTOCELLES WITH BATTERY EMISER, Designed to offer maximum safety and ease of installation at automatic doors, especially in areas where it is not possible to wire both sides.

Thanks to its adjustable system, it allows adjusting the detection angle accurately, facilitating the alignment even in complex installations.

Outdoor receiver 12/24 VDC / AC - 230 VAC with capacity for 400 users with LR (Largo) technology. The receiver has 2 independent channels.

The Automation Kit CAME Ferni 230V reference 8k01mb-009 It is designed to automate swingle In residential or community facilities, offering reliable, robust and durable performance.

The system Ferni stand out for its mechanical design, especially indicated for doors with big pillars or with a considerable distance between the axis of the hinge and the inner edge of the pillar. Its engine 230v It provides constant force and adequate performance for frequent uses.

The Vivaldi Timer TX5 CAME It is a remote control with programmable timer Of 5 channels that serves to automate radio motors according to schedules.

This device allows a motor to move without the user press the knob.

Set of end-of-the running blades compatible with a wide range of sliding motors Motorline. This replacement allows precise detection of the opening and closing points, ensuring reliable automation operation. Ideal for maintenance or substitution tasks.

Fixed support in stainless steel 304 to support the mast of passage barriers.

The transformer CAME 119rir239 is an original spare part designed for the electronic CAME Zl38, used in automatic automatic brand automatisms and barriers CAME. This component is responsible for properly feeding the electronic board, guaranteeing the stable operation of the control system.

Lighting crown of red / green LED lights for barrier CAME Gard GT4.

Group Auxiliary contacts to verify the mast position CAME Gard GT8.

The adaptation kit FAAC RKU 1400 is a system designed to facilitate the replacement of old operators in Automatic sliding glass doors. This kit allows to adapt a new automatism FAAC When an existing engine is replaced, avoiding complex modifications in the door structure.

Thanks to its versatile design, the Kit RKU 1400 FAAC It can be used to adapt a wide variety of commercial operators of sliding automatic doors, provided there is enough space for installation. It is an ideal solution to modernize old facilities or replace damaged automatisms without having to change the entire door system.

The electronic FAAC E2sl is the control unit designed to manage the operation of Pedestrian automatic doors FAAC of the series A1000 and A1400. This electronic plate allows you to control all the movement, safety and operation of automatism.

This Original replacement FAAC It is ideal for replacing a damaged or damaged plant, restoring the correct operation of the automatic door. The E2SL central manages the opening, closing, safety sensors and activation devices, guaranteeing a reliable and safe operation of the system.

The printed circuit board set (PCB) for Sommer S9110 868mhz It is an electronic replacement designed to replace the control system of the garage automation Sommer. This kit includes the set of plates necessary for the correct operation of the automation engine and carriage.

This Original replacement Sommer It should always be installed together, since the manufacturer no longer supplies electronic plaques individually. The replacement of the pair of plates guarantees the correct communication between the control unit and the motor carriage, restoring the normal operation of the automatism.

Module only radio without decoder compatible with all ERROKA devices equipped with internal radio coding systems.

The RSD receiver is designed to receive the signals of radio emitters used in motorized door installations.

The maneuvering box Erreka Puma It is an analog control center designed for the management of single-phase sliding motors Erreka Puma Pus400ec of 230V.

This electronic picture allows you to control an engine up 600 W and incorporates advanced functions as Obstacle detection by encoder, Soft unemployment in opening and closing to avoid blows and rebounds, and complete management of security entries.

The programming is carried out quickly by Potentiometers and Dip-switch, allowing to adjust parameters as the waiting time before automatic closing or the behavior of the security entries.

Picture Erreka Cougar has also 6-pin socket for radio receiver, compatible with cards IRN2, IRN250 or RSD, allowing the use of remote controls Erreka Kuma or iris. It also includes 230V signaling lamp and semaphore management card connection.

GSM controller PALGATE Spider Wiegand 26 with a relay for accessed control system, remote control and Wiegand 26 input for RFID reader connection.

24VDC articulated arm motor For swing doors up to 2.5m per leaf

The motor Articulated arm pyrene is designed especially for residential swing doors of maximum length of 2.5m per sheet up to 250kg of weight.

24VDC Arm Electromechanical Engine, especially indicated To cancel with large pillars With displaced hinges of the edge of the pillar.

It is an engine with Security for obstacle detection and soft electronic stop.

Sliding motor plastic housing DEA Gulliver / no.

Sliding motor housing Sea Saturn

Issuer CAME Top44FGN with Fixcode 433 MHz coding.

Snow sensor, sun, rain and wind with wireless communication, to be installed at greater distance.

It is an exclusive and multifaceted sensor for the Bioclimatic Solar Breeze pergola. It allows to guarantee security and prevent breakdowns and product damage.

The sensor sends an order opening when it detects snow or wind, or send a closing order When it detects water.

Complete kit to automate roller shutters with WiFi control from the mobile, including real-time visualization of the state of the door (open, closed or moving).

This system combines the power and safety of Engine Pujol Winner Pro EF 600/200 with electrofreno for blinds up to 170kg with the intelligent power station Motorline Mc76 and the wifi module Mconnect link, allowing to open and close the blind from anywhere and know at all times if it is uploaded or down.

CAME Fluo-sw is a Automatic pedestrian swing motor technology Brushless 36Vdc, designed for interior access of intensive use as Lobbies, Offices, Public Buildings, Clinics, Shops and Communities. It is a reversible automatism of extremely silent operation, ideal for installations where acoustic comfort and reliability are priority.

Unlocking system pendulum for CAME F4000.

Transmission arm with slide and sliding guide.

CAME F4000 is a Wildlife type 24V DC type with encoder, designed to automate Pedestrian gates of up to 2 meters and 300 kg per leaf. Thanks to its continuous current technology and its advanced electronics, it is ideal for installations of intensive use In communities, residential accesses and professional environments.

Proteción Rhino XL | Motor swing doors up to 5m

230VAC electromechanical actuator for swing doors with leaves up to 5m and 450kg.

Designed for residential, community and commercial use, Rhino XL is the perfect solution to automate up to doors with more than 5m wide.

Proteción Rhino XL | Motor swing doors up to 5m

230VAC electromechanical actuator for swing doors with leaves up to 5m and 450kg.

Designed for residential, community and commercial use, Rhino XL is the perfect solution to automate up to doors with more than 5m wide.

The MPC14 is a controller for safety bands Resistive of 8K2 and optical safety bands.

With its 2 channels, it ensures the Continuous supervision of the security system and blocks it if necessary.

Professional wireless numerical keypad for automations of doors, barriers and motorized accesses, operating exclusively by radio frequency to 433,92 MHz, with 4 independent channels To control different devices from a single keyboard.

Automatism Mike is a Electromechanical actuator for sliding doors of 24v, designed to move leaves up 400 kg. It is oriented to facilities intensive use in environments Residential and collective, offering reliability and high performance.

Incorporate a zipper gear with Motor base with preperforated holes, Adjustable anchor plate and Fixing tool included, which allows a simple adjustment in both vertical and horizontal during installation.

The height of 75 mm between the floor and the pinion It facilitates the replacement of old systems without having to reposition the existing zipper.

Original replacement BFT I200004 10001. Complete gearmotor compatible with slide automatisms BFT Deimo BT A600 and Deimos BT A600 Ultra. Direct substitution and guaranteed by manufacturer.