KIT Roof motor Erreka MAXI 24V Intensive use 1200N for sectional doors up to 18m2. What. It has coding for self-learning of the route, anti-crush system and an independent maneuver board.

Roof motor Erreka NAOS for sectional garage doors up to 11m2 24Vdc with encoder capable of lifting up to 70 kg. What. Includes receiver for up to 20 codes.

Motor kit FAAC C720 (up to 400 kg) or C721 (up to 800 kg) heavy duty 24V for residential and community sliding doors.

Engine FAAC model C720 with 24V operation for light residential and communal sliding doors of up to 400 kg.

Hydraulic motor for residential use with damping and locking for swing doors up to 2,5 metres. Semi-intensive use ideal for residential garage or for community garage of 4 to 6 owners.

Motor centre axle ACM for use in the manufacture of products falling within heading 8528, ideal for powering commercial doors or private garages.

Do not allow the engine to lock when the door is stopped or left closed, if there is no electricity, you can climb by hand. It is recommended to use in places where there is NO alternative access to the shop/garage or an external brake unlocker cannot be installed, as when there is no electric current it can be operated manually.

KIT engines Nice WINGO 24V electromechanical for two-bladed swing doors up to 2 m per sheet (model 4024) and up to 3,5 m per sheet (model 5024).

Other, of circular cross-section ACM for retractable doors 76/360 with electro brake. Motor for industrial spring-loaded rolling doors, axle 76 mm in diameter, lifting capacity up to 360 kg.

It shall be capable of operating at a speed exceeding 100 km/h" designed to automate garage and commercial blinds a diameter of not more than 30 mm, and with a for use in the manufacture of motor vehicles.

The Bi-Motor has an electro-brake system to block the blind, and a knob to unplug it so that it can be opened manually in the event of a power cut. Automation is designed to work with with pulleys of 240/280 mm.

Bi-Motor (doble bobina) ACM para puertas enrollables 60/280 con electrofreno. Motor para puertas enrollables industriales compensadas por muelles, eje de 60 mm de diámetro, capacidad de elevanción de hasta 280 kg.

Motor kit CAME BXV06AGS at 24V for sliding doors up to 600 kg both residential and communal.

KIT engine Clemsa "AB10BC' electromechanical 230V for residential counterweighted tilting doors up to 10m2.

The actuator has the manoeuvre chart CLAS107 incorporated, irreversible locking system with mechanical locking so no locks are required. The manual interior unlocking allows us to actuate the door manually in case of lack of electric current.

Electromechanical engine Erreka TEMIS 24Vdc is used for residential hinged doors up to 2,2 m per sheet.

Kit Electromechanical engines Erreka TEMIS 24Vdc is used for residential hinged doors up to 2,2 m per sheet.

Motor centre axle ACM of a kind used in motor vehicles, ideal for powering commercial doors or private garages.

The electro-brake brakes the blind once it's closed and avoiding opening it manually. The motor includes the auto brake unlock (black cable), to be able to activate the blind in case of lack of electric current in the room or garage.

KIT Sliding engine Clemsa "AC562N" electromechanical 230 V for residential doors up to 500 kg. It incorporates a manoeuvre chart CLAS62C. The actuator has magnetic running ends, levered unlock system, aluminum body painted with polyester powders and ABS crankcase. in addition, thanks to its anti-crush system and smooth stopping we will have an engine with reliability and maximum precision.

Machinery and apparatus for the manufacture of semiconductor devices Erreka In the case of vehicles of categories M1 and N2 for semi-intensive use in swing doors of up to 2 metres by leaf. Ideal for doors with wide pillars.

KIT engine Motorline SLIDE800A at 230V with oil and grease lubricated reducer for sliding doors up to 800kg semi-intensive use and IP44 protection.

Engine EMFA 24V SKYLINE model, for residential or industrial sliding doors up to 600 kg. This equipment has a system that allows the pinion to oscillate and adapt to the irregularities of the zipper, even at gradients of up to 35 mm.

Electromechanical actuator with 230Vac and 24Vdc articulated arm for swinging doors up to 2 meters per blade, ideal for doors with wide pillars.

Electromechanical actuator kit with 230Vac articulated arm for swinging doors up to 2 meters per blade, ideal for doors with wide pillars.

Other, of circular cross-section Clemsa "AR2581F' with electro-brake for roller shutters up to 170 kg. What. Designed to power center-axle winding closures of commercial premises.

The manoeuvre chart of this KIT is model CR81 at 433 MHz.

Motor of Clemsa model AR 2581 with/without electro-brake for roller shutters up to 170 kg.

KIT Electromechanical engine Clemsa "AA 300 B" 230Vac irreversible with lock, for residential sliding doors up to 3 metres in length per sheet.

The actuator has a lock so it does not require the use of electric locks, however, it may be installed as a recommendation. The actuator stroke is 300 mm and the stem output speed is 1,6 cm/sec. Manufacture is made of stainless steel, and the unlock is protected with a lock giving it greater security and reliability.

Other, of circular cross-section Clemsa "AR2581F' with electro-brake for roller shutters up to 170 kg. What. Designed to power center-axle winding closures of commercial premises.

The manoeuvre chart of this KIT is model CLAS 1 with receiver card RNE248 at 433 MHz.

KIT engines Motorline Electromechanical winch at 230Vac or 24Vdc for swing doors of 10 to 20 feet per sheet. It incorporates main, two controls and a security photocell.

KIT Electromechanical engine Erreka KAIROS at 24 Vdc of a kind used in motor vehicles up to 300 kg or 3 metres per leaf for residential or community use.

KIT Roof motor Nice SPY 550N 24V for automating sectional doors up to 9m2 and tilting doors (overflowing and non-overflowing) of a thickness not exceeding 10 mm. What. The SPY engine is ideal for residential use doors.

Engine Nice WINGO HS electromechanical for rapid actuation sliding doors with blades up to 3 metres or 200 kg. Ideal for automating residential folding doors.

Motor for rapid actuation (HS technology) for swing doors with blades up to 3 m or 270 kg. Electromechanical gearbox with articulated arm, external mounting, 24 Vdc, with magnetic encoder. Ideal for residential applications also in the presence of large columns. Ideal for heavy use and fast manoeuvres: opening to 90o in approximately 10 seconds.