List of products by brand Clemsa

Electric lock ERREKA LV9083 VIRO with adjustable input of 50-60-70-80 mm. It's got an internal pusher.It's a long shot. Horizontal or vertical mounting.

Electrical lock ERREKA LV9083 VIRO with outside pump, a width of not more than 50 mm. This is a 60mm Long Gun. Horizontal or vertical mounting.

For use in the manufacture of motor vehicles Clemsa Content of the Annex to the Directive:.

With front end of standard dimensions 74x74 mm .

Includes 2 LK10 magnetic keys.

LED signalling lamp with fixed or flashing light. What. In the case of vehicles with a maximum mass not exceeding 2000 kg:. THIS IS IP 54. 90 x 190 x 75 mm

The TSM 2 U traffic light control module is a device for regulating the passage of vehicles through traffic lights.

It is indicated for the passage control in garages with entrance and exit by the same door, two-way parking ramps, accesses to businesses by two-way barriers and all situations where it is necessary to regulate the passage of vehicles through a single point through traffic lights.

System to control capacity a business, office, swimming pool or commercial premises in a simple and intuitive way.

Autonomous operation. What. All you have to do is type in the maximum capacity you want for the establishment.

Manufacture from materials of any heading Clemsa F35 mirror fed to 12/24V with retro-reflector up to 12 metres and IP66 protection.

Magnetic contact Clemsa CM1 for pedestrian doors. What. Medium power. In the case of vehicles of categories M1 and N2. Surface installation. 6 terminals. High power.

Of a thickness of Clemsa model BAPZ, which prevents pedestrians from catching their fingers on the hinge edge.

Industrial radars Clemsa with opening and opening sensors with presence detection.

Laser sensor or Barrier scanner Clemsa XGUARD for motion and presence detection.

Impulse garage light card Clemsa TG3 for old CLAS manoeuvres.

Timed garage light card Clemsa TG2 for old CLAS manoeuvres.

Machinery for making pulp of fibrous cellulosic material Clemsa, to detect vehicles (cars or motorcycles) when that vehicle passes over the door, it reverses the maneuver just as if we were passing in front of a photocell. A magnetic loop is also usually installed to prevent an owner from opening the door to enter on foot, therefore the door would only open if the magnetic loop detects a vehicle in the area where the winding is installed (usually in the buried ground).

We introduced a new concept of wireless vehicle detection. What. The system e-Loop replaces traditional wired inductive loops, saving time and money it also increases reliability.

Installation in 3 easy steps

1. Encode the e-Loop
2. Fix the e-Loop to the driveway
3. Calibrate the e-Loop... and it'll be up and running in less than 15 minutes

It saves many hours of installation time compared to wired loop systems.

With this electronic card you can light up your garage by opening the door to the entrance or exit.

It is very easily placed on the control board and can be programmed to be turned on by pulse or timer.

LED traffic light Clemsa two red and green lights or amber with a 120mm lens diameter of 25 LEDs. It is ideal for signalling the passage of vehicles or people.

Emergency battery kits Clemsa and FAAC to manoeuvre in the event of a power failure.

The maximum manoeuvres shall depend on the state of charge of the batteries and the consumption of the automatic system.

Garage crew Clemsa model MUTANcode N82 this is a 2-channel mini format, RollingCode 868 MHz.

KIT Sliding engine Clemsa/Genius BLIZZARD electromechanical 230V for residential doors up to 500/900KG. It incorporates maneuvers. The Driver has magnetic career endings, levered unlock system, aluminum body painted with polyester powders and ABS crankcase. in addition, thanks to its anti-crush system and smooth stopping we will have an engine with reliability and maximum precision.

Motor gearbox Clemsa AB for tilting doors or chain drag.

Engines for tilting doors models Clemsa AB 2315 FC, AB 2350 / 2350 FC, AB 2360 / 2360 FC, AB 2362 / 2362 FC, AB 2364 / 2364 FC, AB 2366 / 2366 FC, AB 2368 and AB 2369 have been developed to be used as an engine element in all types of docks and counterweight doors.

They are robust, reliable and suitable motors for continuous and heavy work. No maintenance and very quiet.

Issuer Clemsa Mutan-II Long range model NT LR with 2 channels, a Rollingcode 868 MHz system with an elegant and minimalist design.

Garage crew Clemsa model MUTANcode N4 with 4 channels, RollingCode is 433 MHz.

Garage crew Clemsa model MUTANcode N84 4 channels, rolling code 868 MHz.

This emitter comes with the standard code, so it won't work in garages where an installer has put in a custom code. It is 100% compatible with the receivers and receiver cards of this website Tecnoparking. Activation can be done by the receiver button or remotely by radio with a pre-programmed control.

Garage control of the CLEMSA brand, model MASTERcode MV123 three green buttons. The frequency of this remote is 433.92 MHz and coding is done by 8 switch system.

Magnetic contact lock Clemsa CK20 coded for of a kind used in motor vehicles.

It shall be so designed and constructed as to conform to the requirements of this Regulation.

Engine Clemsa AA30 electromechanical 230V for one-bladed swing doors for a maximum length of 3m by sheet. What. The AA30 model is ideal for automating residential doors for non-intensive use.

KIT's engine Clemsa AA30 electromechanical 230V for one-bladed swing doors for a maximum length of 3m by sheet. What. The AA30 model is ideal for automating residential doors for non-intensive use.

KIT engines Clemsa AA30 230 V electromechanical two-bladed swing doors for a maximum length of 3m by sheet. What. The AA30 model is ideal for automating residential doors for non-intensive use.

Garage crew Clemsa model MUTANcode N2 this is a 2-channel mini format, RollingCode 433.92 MHz.

Plug-in receiver card Clemsa Mutated for 400 users, of 2 channels at 433,92 MHz and 868 MHz on the same receiver. Compatible with the Mutan and Mutan-II emitters.

Plug-in receiver card Clemsa "RNE248" frequency 433 MHz & 868 MHz, 2 channels with memory up 400 users.

The receiver can operate independently at 433 MHz or 868 MHz and is compatible with Mutan and Mutan-II broadcasters.

Contactless proximity key reader Clemsa CK40 1 channel and CK42 2 channels for use with TD420/U decoders.

RFID proximity key from Clemsa for the readers CK40 and CK42.

Electromechanical operator Clemsa AS60 (600N) or AS120 (1000N) for sectional doors up to 15m2 with built-in frame. Optimized installation times thanks to its patented three-step assembly. Courtesy light built in.

The KIT consists of a 230Vac electromechanical actuator with built-in box, RNE248U receiver and 2 NT2S emitters at 433 MHz.

The guide can be chosen at the choice of the customer according to their needs in our deployable.

Adapter Clemsa ADT 3 B to connect MutanCode cards to Motors FAAC.

Receptor Clemsa Long-range Mutancode RNE 248 U LR in frequency 433.92 MHz and 868.35 MHz designed to deliver maximum performance and security in access automation systems. This model has 2 relay outputs, which allows to control up to two different accesses, such as garage doors, automatic gates or alarm systems.

Programmable control panel. Rolling and sliding actuators 230 V or 400 V. Max. 1500 W.

Hydraulic oil Clemsa/FAAC in a 2-litre bottle.

This is a universal maneuver chart Clemsa Class X for 230Vac drives with built-in Long Frequency Receiver (LR)).

Adapter Clemsa ADT 5 A to insert RNE248 (4 pins) cards in maneuver boxes FAAC (6 pins).

Spare Clemsa AA300 / AA400 small pieces Mistral Sirocco.

Issuer Clemsa NT1 health care two-channel, unmatched Rollingcode 433.92 MHz system with a sleek and minimalist design.

Plastic garage control board Clemsa Mutancode Mini in grey.

Full race finish (box with electronics) for retractable motor Clemsa AR2581.