Electronic input plate 230Vac for Motor V2 AYROS 24V.

Electromechanical motor CAME Irreversible 24V ATI ATI for residential or community swing doors Up to 3 meters and up to 400 kg.

The CAME ATI A3024N It is an electromechanical 24V gearmotor designed to automate swing doors of a sheet with maximum reliability and safety. It belongs to the renowned ATI range of CAME, one of the most robust series of the market, ideal for both residential and community facilities with intensive use.

Special 220V receiver base for electric locks or electric locks. What. It has independent terminals for output at 12Vac, 12Vcc or 24Vcc.

Ideal for controlled door opening (doors, office, etc.), controlled by remote control, or by an external button.

Other, of circular cross-section ACM for retractable doors 76/360 with electro brake. Motor for industrial spring-loaded rolling doors, axle 76 mm in diameter, lifting capacity up to 360 kg.

Aluminum and iron door hardware set for the MAGIC power supply Erreka.

" The manufacturer Erreka has decatalogued this product "

Table of manoeuvres Erreka Digital SMART-D201 for 1 or 2 motors pulsing at 24Vdc and electric lock output.

The SMART-D201 table is valid for DC motors: TEMIS, KAIROS and ARES.

KIT Electromechanical engine Clemsa "AA 300 B" 230Vac irreversible with lock, for residential sliding doors up to 3 metres in length per sheet.

The actuator has a lock so it does not require the use of electric locks, however, it may be installed as a recommendation. The actuator stroke is 300 mm and the stem output speed is 1,6 cm/sec. Manufacture is made of stainless steel, and the unlock is protected with a lock giving it greater security and reliability.

Electromechanical actuator with 230Vac and 24Vdc articulated arm for swinging doors up to 2 meters per blade, ideal for doors with wide pillars.

Motor for sliding doors Hy-Dom for heavy duty at 230v. What. It incorporates an angle reader (encoder) and an anti-crushing system at opening and closing, a manual assistance manoeuvre activation system, and detection in case of untimely closure of the door by a gust of wind.

Other, of circular cross-section Clemsa Mastercode "RMV 2" 433 MHz with two channels.

The receiving card 'RMV 2" connects directly to manoeuvring frames Clemsa have at their disposal connection 4 pins which allows us to connect directly to the circuit board without the need for wiring.

Product discontinued by the manufacturer. Not available for sale.

This model has been officially replaced by a more current version, which incorporates technical and functional improvements.

👉 Recommended substitute product:

Sliding Motor Brushless Motorline Gallo 36V to Motorize Super Intensive Use Doors

KIT Hydraulic motor HYDOM 4LR Semi-intensive for swinging doors residential use up to 3,5 metres per blade. What. The actuators are powered at 230V and have 250mm stroke, hydraulic damping in opening and closing, available version without lock and with double lock.

KIT electric motor for residential use, BFT model"PHEBE BT A U C" for automating swing doors of up to 8m2.

Electromechanical operator for residential use to automate tilting garage doors.

The integrated control centre, allows the operation of a second engine for large doors or with an integrated pedestrian door. For tilting doors up to 10m2 with installation of two motors.

In addition, microprocessor technology allows the torque of the motors to be controlled with maximum precision and complete safety.

Garage crew Sommer 4050V 2-channel with a quartz frequency of 40.685 MHz and programming by combination of dip-swtiches is therefore configured by placing the corresponding combination of digits.

Electromechanical engine EMFA BAT 2 in 230V and 24V version for residential swing doors of up to 3 metres per leaf.

Engine Clemsa AA40 electromechanical 230V for one-bladed swing doors for a maximum length of 4m per leaf. What. The AA40 model is ideal for automating residential doors for non-intensive use.

The Sprint Low is intended to insert some self-charging batteries by the same electronic board, which ensures its operation in the event of a power failure.

The kit consists of 2 batteries, the stand and the charging plate.

Magnetic key reader and encoder LK-10 + 200 Keys.

It allows the encoding of magnetic keys of 6 magnets basic codes, encodes key with central guide, left and right.

Motor gearbox Aprimatic Wave 600 to 230V, use in individual residences up to 600 Kg. What. Built on a sturdy aluminum monoblock injected and oven lacquered with special outdoor epoxy resin. It has a precise encoder which provides maximum control over the speed, force and position of the door. Incorporates maneuver chart easy start-up with self-learning of the basic working parameters. Transmission consisting of endless steel screws and bronze crown obtaining a door movement soft, quiet and very reliable.

Garage control of the CLEMSA brand, model MASTERcode MV12 two green buttons. The frequency of this remote is 433.92 MHz and coding is done by 8 switch system.

Electromechanical engine Forsa SURF 300 for swing doors with sheets up to 3,5 metres and 300 kg of weight.

KIT Motor Came BK-1200 from 230V for sliding doors of up to 1200 kg and a length not exceeding 20 metres. What. It incorporates electronic card with programming display, built-in radio decoding and mechanical race endings.

Facility manager via PC and SW 7 software (including) MUTANcode and MUTAN II systems. This is database management. Issuers N, NT and T.

" THE PT7 MODEL HAS BEEN REPLACED BY THE PT8 MODEL WITH NEW FEATURES "

Table of manoeuvres Aprimatic A40DG designed to control one or two motors at 230V up to 800W per motor.

Table of manoeuvres DEA 200SR for use in 230Vac engines with race finishes by times.

The electronic plate is mainly used for the motor DEA 901L of tilting or preleving doors.

Table of manoeuvres V2 CITY5 230V digital for the management of a traffic light installed near a vehicle crossing with a two-way direction of travel.

Hexagonal curved axle of 60 mmfor tubular domestic blinds.

I command Motorline MX96N 5 channel with an innovative and functional design, with support included.

Operator BFT "TIZIANO B GDA 260 S01' for sectional garage doors with a tensile strength of 60 kg and heavy duty. What. Area of the door 10 m2. Opening speed 6.6 m/min. D-Track

NotesThe following: this product consists only of the engine head, intended for replacement. If you need all the material to drive a section door, we have the FRENCH KIT.

Electromechanical engine NICE model TOONA 5external mounting for residential swing doors with blades up to 5 metres. Also available in 24Vdc version, with magnetic encoder.

Motor centre axle NF-EMBA SERIES for use in the manufacture of products falling within heading 8528 [1], ideal for powering commercial doors or private garages.

The electro-brake brakes the blind once it's closed and avoiding opening it manually. The motor includes the auto brake unlock (black cable), to be able to activate the blind in case of lack of electric current in the room or garage.

Garage crew Erreka Four channel IRIS, rolling code at 868 MHz.

Saxo hydraulic motor Erreka ATLAS for outside opening.

Engine Nice Slight with integrated control unit and absolute encoder for sliding doors up to 400 kg and 6 m in length.

This is the NICE RUA1. Control electronic plate RUN 1800 / RUN 2500 for sliding motors of automatic doors and entry gates weighing up to 1800 kg and 2500 kg in its two versions with this model of control manoeuvring box for a totally safe and efficient configuration of its functions thanks to this control centre

Motor kit CAME AXO Irreversible 24V for hinged doors up to 5 m.

Electromechanical barrier 24 V Motorline SIGMA-XS5 with mast up to 5m.

The serie BFT Kustos BT B is a range of 24V electromechanical pistons Designed for the automation of Residential and community swing doors. These operators stand out for their reliability, safety and ease of installation, being suitable for doors up 4 meters long and 700 kg of weight according to the model.

Support for the installation of the Hydom ROTOR-UNIC engine in tilting doors.

Bi-engine Forsa Unless otherwise specified in the EU-type examination certificate, the requirements of this Regulation shall not apply for roller shutters up to 153 kg.

As a result of the tireless search for improvements in the functional characteristics of our automatic doors and thanks to innovative construction solutions, we present a team capable of adapting to all the rolling doors with a balanced axis.

Table of manoeuvres Nice OGA2N at 24V for SHEL50KCE, SHEL60KCE and SHEL75KCE sectional motor. What. The plate has a built-in receiver at a frequency of 433.92 MHz and functions of automatic shutdown, motion regulation and reversal of motion in case of obstacles during travel.

Engine buried and removable Nice L-Fab HS at 24 V for rapid operation of sliding doors up to 4 m.

It incorporates magnetic encoder and mechanical stoppers. Ideal for intensive use and fast manoeuvres (aperture 90o in approximately 6 sec)

Engine DEA Electrical and electronic equipment for use in the manufacture of motor vehicles residential or community use up to 10 feet per leaf.

Automation for swing doors STING handles doors for residential or community use, with blades up to 3 metres long and weighing up to 400 kg. Equipped with built-in mechanical stoppers STING does not need stoppers on the ground, elements that could be annoying or unelegant.

Manufacture from materials of any heading Erreka Controlled industrial LFTIND with anti-vandal obstacle detection. What. Detection distance up to 60m indoors and up to 40m outdoors.

Control panel CAME ZL65 24V for one- or two-bladed swivels, with programming display, built-in radio decoding and self-diagnosis of security devices.

Sensor FAAC XV1 with dual technology for movement and presence.

Aperture and security in one sensor. Safety control according to EN 16005