Best sellers

Showing 1465-1488 of 2123 item(s)

Overhead Door Motors

KIT's hydraulic motor Erreka ATLAS with telescopic fixtures for tilting doors up to 15m2

Hydraulic motor Erreka 230Vac ATLAS for residential or community intensive use for doors up to 15 m2 with an obstacle detection system. Available in reversible or irreversible versions and with anti-lock system.

Swing Gate Motors

KIT engine Erreka CALYPSO electromechanical 230V for residential doors up to 3m

Erreka

CALYPSO12

€552.00

KIT Electromechanical engine Erreka CALYPSO CA53 of 230Vac to automate residential doors of a sheet up to 3m and 300KG. The Kit features a VIVO-M101 maneuver box for a 230Vac drive, receiver card, KUMA handles and safety photocells.

Swing gate accessories

Machinery and apparatus Erreka VULCAN: adjustable supports

Erreka

AVU01

€34.00

Adjustable support for vibrating motor Erreka model VULCAN and VULCAN D.

Home

Receiver CAME RKLT-50 for household blind

CAME

001YE0117

€60.00

Outer receiver CAME model RKLT-50 for powering electromechanical end-of-course blinds, awnings and curtains up to 50 Nw. " This model has been replaced by the RKLT-120 with higher benefits "

Batteries for Remotes

For use in the manufacture of motor vehicles GP

CR1220

€3.75

Blister of the brand GP. What. This is a 3V CR1220 lithium battery.

Batteries for Remotes

For the purposes of this Regulation, the following definitions apply: GP

CR2450

€9.75

Blister of the brand GP. What. This is a 3V CR2450 lithium battery.

The NICE MINDY A01 manoeuvre chart for the rolling shutter - Figure 1

The NICE MINDY A01 manoeuvre chart for the rolling shutter - Figure 1 2

Control Panels

NICE MINDY A01 control panel for roller shutters

Nice

A01

€45.00

NICE A01 manoeuvring chart of 230 Vac, for single-phase motors with retractable doors, not automatically closed. It incorporates a RollingCode 433.92 MHz receiver for the Flo, FloR and Smilo transmitters. BOX NICE A01 HAS BEEN REPLACED BY THE NEW MODEL MC200, CLICK HERE TO SEE IT.

Spare parts

Anchor plate CAME 119RIG039 for G6000 G6000 and G2080 barriers

CAME

119RIG039

€66.00

Anchor plate CAME 119rig039 for automatic barriers Gard G6000 and G2080. Replacement of the foundation plate used to fix the barrier cabinet to the installation base.

Electromechanical swing motors

Board Inox Box CAME Frog-CFNI for FROG engines

CAME

001FROG-CFNI

€310.00

Foundation box CAME Frog-cfni ref. 001frog-cfni manufactured in AISI 304 stainless steel for buried engines CAME Frog. Includes hitch lever, fixing flange and regulation of the endpoint endpoint in opening. Engine not included.

Electronic card CAME ZL392B 88003-0083 for GT4 GT4 and...

Electronic card CAME ZL392B 88003-0083 for GT4 GT4 and... 2

Replacement plates

Electronic card CAME ZL392B 88003-0083 for GT4 GT4 and GT8 barriers

CAME

88003-0083

€219.00

Electronic card CAME ZL392B Ref. 88003-0083 for automatic barriers Gard GT4 and GT8. Replacement for replacement of the original plant, with display, bus and receiver connections CAME AF plug-in.

Replacement plates

Electronic card CAME ZN2 3199ZN2 for BX-243 sliding motor

CAME

3199ZN2

€134.00

Electronic card CAME ZN2 ref. 3199zn2 Spare force for sliding motor CAME Bx-243. Indicated for repair or replacement of the original plant. Radio receiver not included.

Spare parts

Brazo deslizante Motorline TELICA DL

Motorline

BRACODL-TELICA

€57.00

Spare parts

Housing top cover Sliding engine Sea / Forsa Mercury

Forsa

36302005

€47.00

Housing top cover Sliding engine Sea / Forsa Mercury.

Sliding Gate Motors

Livi 6 / 24X / M Kit for sliding door 600 kg | 24V + NET24N

DEA SYSTEM

611300

Kit Dea Livi 6 / 24x / M It is a complete solution for the automation of Residential sliding doors up to 600 kg, equipped with electromechanical gearmotor 24v and electronic central DEA NET24N. The whole also includes Line-X photocells, LED signaling lamp Dea Aura-X with integrated antenna and 2 CANALS DEA CONTRAINS OF 2 CASE, Forming a complete kit with...

Masts and skirts

Tapón para asta Barrera NUUR

Tapón asta NUUR

€14.00

Spare parts

Set of joints and o-rings for hydraulic engine Erreka Atlas

Erreka

05B055

€34.00

Spare composite set by Together, O-rings and sealing elements For maintenance and repair of hydraulic motors Erreka Atlas Used in tilting doors. This kit is generally compatible with the engines Erreka Atlas And it allows to replace the sealing elements that can deteriorate with the passage of time, the continued use or aging of the hydraulic oil.

Spare parts

Disco de freno CAME BY-1500, C-BY y BK2200T - 119RIY054

CAME

119RIY054

€23.00

Masts and skirts

Yellow stopper for mast CAME GT4 / GT8 (88003-0088)

CAME

88003-0088

€20.00

The CAME 88003-0088 It is the original terminal plug designed to close the free end of the masts CAME with 90 × 60 mm. This yellow replacement protects the inside of the mast in front of the dirt inlet and provides a safe and uniform finish on the tip of the barrier.

Manufacture from materials of any heading

Photocell Prastel Foto-R ORIENTABLE 12-24V Up to 30 meters

Prastel

FOTO-R

€35.00

The photocell Prastel Foto-R is a wired and adjustable safety device for automatic doors, gates and motorized cancers. Its regulation system allows precisely aligning the TX emitter and the RX receiver, even when they can not be installed fully confronted. Has a 180 ° adjustable head in horizontal and 30 ° vertical, LED indicator of alignment and test...

Motor kit VDS Geko 230V for residential sliding doors up...

Motor kit VDS Geko 230V for residential sliding doors up... 2

Sliding Gate Motors

Motor kit VDS Geko 230V for residential sliding doors up to 400 kg

VDS

KIT GEKO 400K 220V

€230.00

motor kit VDS Geko It is designed to automate Sliding doors up to 400 kg. Includes the gearmotor VDS Geko with built-in radio maneuver and receiver box, two remote controls, a game of photocells and four meters of nylon zipper. The engine runs to 230 VAC and has Electromechanical race end, User unlocking by key and electronic regulation of force. Your...

Sliding gate accessories

Cable de Acero Galvanizado Ø5 mm para Puertas Correderas Telescópicas – Bobina 25 m

Esmiper

30002008.25

€49.00

Tubular transmitters & accessories

Central V2 CU3, CU4 y CU5 para Toldos y Persianas con Motor Tubular 230V

V2 CU

€59.00

Control Panels

Maneuvering CAME ZLX24SA for 24V swing engines

CAME

801QA-0060

€299.00

CAME Zlx24sa It is a multifunction maneuver chart designed for automatisms of two-leaf swing doors with engines 24v. Incorporates feeding 230V AC, Programming and Signaling Graph Display, Self-diagnosis of Security Devices and Advanced Speed Control and Pair Control Technology.

Nice Bidi-wifi ext | Wifi Extender Kit for Automation...

Nice Bidi-wifi ext | Wifi Extender Kit for Automation... 2

GSM, Bluetooth and WiFi modules

Nice Bidi-wifi ext | Wifi Extender Kit for Automation Nice with ibt4ext

Nice

BIDI-WIFI EXT

€86.00

The Nice Bidi-wifi ext It is a kit designed to expand Wi-Fi automation connectivity Nice Installed in areas where wireless coverage does not reach the control plant correctly. This system allows you to connect automatisms Nice, such as garage doors, automatic gates or doors, to the Wi-Fi network and applications Mynice and Mynice pro, facilitating the...

Product added to wishlist

This website uses proprietary and third-party cookies to improve our services and display advertising with our preferences through the analysis of our browsing habits. To give your consent when you press the Accept button.

Best sellers

KIT's hydraulic motor Erreka ATLAS with telescopic fixtures for tilting doors up to 15m2

KIT engine Erreka CALYPSO electromechanical 230V for residential doors up to 3m

Machinery and apparatus Erreka VULCAN: adjustable supports

Receiver CAME RKLT-50 for household blind

For use in the manufacture of motor vehicles GP

For the purposes of this Regulation, the following definitions apply: GP

NICE MINDY A01 control panel for roller shutters

Anchor plate CAME 119RIG039 for G6000 G6000 and G2080 barriers

Board Inox Box CAME Frog-CFNI for FROG engines

Electronic card CAME ZL392B 88003-0083 for GT4 GT4 and GT8 barriers

Electronic card CAME ZN2 3199ZN2 for BX-243 sliding motor

Brazo deslizante Motorline TELICA DL

Housing top cover Sliding engine Sea / Forsa Mercury

Livi 6 / 24X / M Kit for sliding door 600 kg | 24V + NET24N

Tapón para asta Barrera NUUR

Set of joints and o-rings for hydraulic engine Erreka Atlas

Disco de freno CAME BY-1500, C-BY y BK2200T - 119RIY054

Yellow stopper for mast CAME GT4 / GT8 (88003-0088)

Photocell Prastel Foto-R ORIENTABLE 12-24V Up to 30 meters

Motor kit VDS Geko 230V for residential sliding doors up to 400 kg

Cable de Acero Galvanizado Ø5 mm para Puertas Correderas Telescópicas – Bobina 25 m

Central V2 CU3, CU4 y CU5 para Toldos y Persianas con Motor Tubular 230V

Maneuvering CAME ZLX24SA for 24V swing engines

Nice Bidi-wifi ext | Wifi Extender Kit for Automation Nice with ibt4ext

Filter by

Categories

Price

Manufacturers

Home