Best sellers

Showing 1729-1752 of 2111 item(s)

Replacement CAME 88001-0195 Cap and support for Axo 5/7...

Replacement CAME 88001-0195 Cap and support for Axo 5/7... 2

Spare parts

Replacement CAME 88001-0195 Cap and support for Axo 5/7 motors

Replacement CAME 88001-0195 for Axo 5/7 motors. Set of Spindle bushing / nut with stand Compatible with automatisms CAME AX5024 and AX71230. Does not include the full engine.

Receptors

ROGER R93 / RX12A / U 2 channels 433,92 MHz 12 / 24V

ROGER

R93/RX12A/U

€41.00

Roger Technology R93 / RX12A / U It is a radio receiver of 2 channels Designed for automation control using compatible Roger Technology. Work Frequency of 433.92 MHz with fixed code technology and supports 12/24 VAC / DC power supply, Facilitating its installation in different maneuver tables and automation systems. It is compatible with the Roger...

Replacement plates

Electronic card FAAC E844 3PH | Substitute 844T and 884

FAAC

202073

€202.00

FAAC E844 3PH is an electronic control card for automation for three-phase sliding doors FAAC. Is designed To control the gearmakers FAAC 844 R 3PH and FAAC 884 Mc 3PH, used in industrial, commercial and residential sliding accesses. The E844 3PH incorporates a more modern electronics With programming screen, 2Easy bus connection, security devices...

Rails & accessories for sectional doors

Beninca PTC.3 | Directing guide with sectional door up to 2.5 m

Beninca

9667019

€114.00

Beninca PTC.3 is a pre-tested and prestressed guide with running per runA destined to automatisms Benincà for sectional garage doors. Is designed for doors with a maximum height of approximately 2.5 meters and it is supplied divided into 2 sections To facilitate your transportation and installation. This guide corresponds only to the mechanical drag...

LED Lamp Dea Aura-X Multivoltage with antenna 433/868 MHz

Flashlights

LED Lamp Dea Aura-X Multivoltage with antenna 433/868 MHz

DEA SYSTEM

661131

Dea Aura-X (661131), is a multivoltage LED signaling lamp with integrated antenna For automations of doors, gates and barriers. You can feed at 24 V AC / DC, 120 V AC or 230 V AC and allows you to select the frequency of the Antenna between 433 MHz and 868 MHz.

Spare parts

Side cover Motorline MSL808 for Slide800A Motor

Motorline

MSL808

€17.00

The Motorline Msl808 is a Side replacement lid for sliding door automation Motorline Slide800a. It allows replacing the original piece when it is broken, damaged or lost, without changing the full motor housing.

Protective pinion crankcase CAME 1196040 for BX-243

Spare parts

Protective pinion crankcase CAME 1196040 for BX-243

CAME

119RIBX040

€20.00

CAME 119ribx040 It is the spare part to protect the pinion area in the automations for sliding doors CAME Bx-243. It is an adequate piece to replace the original protector when broken, deteriorated or has been lost during a maintenance intervention.

Lock and 2 unlocking machines for motor Erreka Cyclone

Spare parts

Lock and 2 unlocking machines for motor Erreka Cyclone

Erreka

24B095

€30.00

Lock and 2 unlocking machines for motor Erreka Cyclone

Full front rod Motorline LINCE 300, 400 and 600

Spare parts

Full front rod Motorline LINCE 300, 400 and 600

Motorline

Vástago LINCE

€39.00

Full front sparefoot spare for swing motors Motorline Lynx, available for LNINCE 300, LINCE 400 and LINCE 600 models. This set is part of the front arm of the engine and transmits the necessary movement to extend and collect the stem during the opening and closing maneuvers. Select the model: Choose between the stem for Lynx 300, lynx 400 or lynx 600....

Swing gate accessories

DEA SB: Placa posterior articulada para LOOK, MAC, STING

DEA SYSTEM

629381

Copy of maneuver box Pujol Junior and Pro with built-in...

Copy of maneuver box Pujol Junior and Pro with built-in... 2

Control Panels

Copy of maneuver box Pujol Junior and Pro with built-in receiver 433 MHz

Pujol

KIT P9CTRL0476

€75.00

Electronic control box PUJOL JUNIOR E PRO for roller doors with receptor built to 433.92 MHz Compatible with transmitters Pujol Vario and Secure.

Overhead door accessories

Soporte extremo tubo "U" para Motores Hydom Minimax y Rotor-Unic

HYDOM

KIT 1090/4

Spare parts

Plastic housing Erreka Dingo

Erreka

23B001

€34.00

External replacement plastic housing for the runner-up engine Erreka Dingo. It allows replacing the original cover when it is broken, cracked or deteriorated, preserving the existing motor if it continues to work properly.

Spare parts

Bronze crown for sectional engine Motorline Rosso Evo

Motorline

MRS34

€29.00

The bronze crown Motorline Mrs34 It is a mechanical replacement for the reducing group of ceiling automations for garage doors Motorline Rosso Evo.

Replacement plates

Electronic plate CAME ZL57 for Sectional Engines Ver10dms and Ver13DMS

CAME

88001-022

€107.00

CAME ZL57 (88001-0222) is the original replacement electronics ZL57 V.2 for automations of garage doors CAME VER10DMS and VER13DMS. This control plant controls the operation of the motor, the security devices and the accessories connected to the automation. It is the indicated solution to replace a faulty ZL57 plate and recover the operation of the...

Door Keypads

Radio code keyboard Sommer Entrakey (Somloq2)

Sommer

S14148-00001

€157.00

Radio code keyboard Sommer Entrakey Allows you to control garage doors, gates and other Sommer automations in a comfortable way by introducing a personal numerical code, without the need to use a remote control.

Parking controls

Garage control Erreka Kuma KU03 433,92 MHz 3 channels

Erreka

KU03

€24.00

Trinalized fixed code issuer at frequency 433.92 MHz and programmable by dip-switch coding located on the back cover.

Pedestrian Swing Gate Motors

Straight arm of traction (CAME 818xa-0040)

CAME

818XA-0040

€73.00

Straight traction arm CAME 818xa-0040 It is an original accessory designed for automation of swinged pedestrian doors CAME Fluo-sw. It is a sliding traction arm intended for facilities in which the door Open inside, view from the side where automatism is installed. It is compatible with operators CAME Fluo-SW2 and Fluo-SW3 and allows you to perform a...

Swing gate accessories

Adapter Kit ADA / FKS for OLI / N 270 mm motor

DEA SYSTEM

629400

ADA Kit / FKS, with reference 629400, is an adaptation kit designed to install a Hydraulic motor oli / n with 270 mm stroke In facilities that already have supports or fixing plates placed at a distance of 960 mm between centers. This accessory is especially useful in renewal or automation replacement work, since it allows to adapt the new OLI / N...

Kit de desbloqueo Nice SMA.8003 para motores ROBO y PLUTO

Spare parts

Kit de desbloqueo Nice SMA.8003 para motores ROBO y PLUTO

SMA.8003

€29.00

Electromechanical swing motors

Motors kit V2 Calypso 600 230V for 2-leaf swing door

CALYPSO600 KIT2

€536.00

Automation kit for Two-leaf residential beating doors, composed of two irreversible electromechanical engines V2 Calypso 600 of 230 V. Designed to automate sheets up 4 meters long and 500 kg weight per leaf, as long as the geometry, structure and dormas of the door installation are compatible.

Masts and skirts

Junta para asta V2 NUUR

163653

€42.00

Engine Beninca BOB2124E 24V with encoder for swing doors...

Engine Beninca BOB2124E 24V with encoder for swing doors... 2

Electromechanical swing motors

Engine Beninca BOB2124E 24V with encoder for swing doors up to 2.1 m

Beninca

BOB2124E

€315.00

Beninca Bob2124e is an irreversible electromechanical gearmotor 24 VDC Designed for the automation of Beating doors up to 2.1 meters per leaf. It is a car prepared for intensive use and equipped with encoder, offering precise control of the door movement and allowing the electronic plant to manage more precisely the different phases of opening and closing.

Replacement plates

Nice SPEG035B00 Electronic Plate for D-Pro Table 924

Nice

SPEG035B00

€54.00

Electronic plate Nice Speg035B00 for D-Pro 924 Table The Nice Speg035b00 is a spare station intended to the maneuvering box Nice D-Pro 924.

Product added to wishlist

This website uses proprietary and third-party cookies to improve our services and display advertising with our preferences through the analysis of our browsing habits. To give your consent when you press the Accept button.

Best sellers

Replacement CAME 88001-0195 Cap and support for Axo 5/7 motors

ROGER R93 / RX12A / U 2 channels 433,92 MHz 12 / 24V

Electronic card FAAC E844 3PH | Substitute 844T and 884

Beninca PTC.3 | Directing guide with sectional door up to 2.5 m

LED Lamp Dea Aura-X Multivoltage with antenna 433/868 MHz

Side cover Motorline MSL808 for Slide800A Motor

Protective pinion crankcase CAME 1196040 for BX-243

Lock and 2 unlocking machines for motor Erreka Cyclone

Full front rod Motorline LINCE 300, 400 and 600

DEA SB: Placa posterior articulada para LOOK, MAC, STING

Copy of maneuver box Pujol Junior and Pro with built-in receiver 433 MHz

Soporte extremo tubo "U" para Motores Hydom Minimax y Rotor-Unic

Plastic housing Erreka Dingo

Bronze crown for sectional engine Motorline Rosso Evo

Electronic plate CAME ZL57 for Sectional Engines Ver10dms and Ver13DMS

Radio code keyboard Sommer Entrakey (Somloq2)

Garage control Erreka Kuma KU03 433,92 MHz 3 channels

Straight arm of traction (CAME 818xa-0040)

Adapter Kit ADA / FKS for OLI / N 270 mm motor

Kit de desbloqueo Nice SMA.8003 para motores ROBO y PLUTO

Motors kit V2 Calypso 600 230V for 2-leaf swing door

Junta para asta V2 NUUR

Engine Beninca BOB2124E 24V with encoder for swing doors up to 2.1 m

Nice SPEG035B00 Electronic Plate for D-Pro Table 924

Filter by

Categories

Price

Manufacturers

Home