Control panel CAME ZL65 24V for one- or two-bladed swivels, with programming display, built-in radio decoding and self-diagnosis of security devices.

Central command Nice Moonclever MC424L for 24 Vdc sliding door motors, without encoder, with integrated receiveror and ready for Opera and Solemyo system.

Control panel Clemsa Class 30.1 for the actuation of 24Vdc sectional roof doors. What. Residential use. This is a manual/automatic/semi-automatic.

Gearbox for 2 engines powered at 230 Vac in a simplified version with integrated radio, designed for the control of two motors (hydraulic or electromechanical), allows to program different times of gaps in opening and closing, force regulation and programming of the soft stop at the end opening and closing maneuver, incorporates light indicators in the control inputs.

Table of manoeuvres Pujol SENIOR II PRO 230V for two-bladed swing doors, with a receiver for up to 255 users and a built-in antenna.

Table of manoeuvres Pujol SENIOR 1 analogue for swing doors with electric lock output.

Table of manoeuvres BFT ALPHA SD for sliding doors and shutters. What. For residential use only, both in households and communities of owners. The functions can be programmed by LCD screen. It has a removable knob to connect accessories that extend the functionality of this control board. Up to 63 controllers with Rolling Code technology can be installed.

" THIS ELECTRONIC PLATE IS OUT OF CATALOG. THE NEW PLATE REPLACES IT SHYRA CPEM FULLY COMPATIBLE "

Table of manoeuvres BFT "THALIA' with screen for one or two 24 V electromagnetic operators used in 230 V/500 W swing doors (in the Power version). The bi-channel radio receiver at 433 MHz has been incorporated.

It has an anti-crushing system based on D-Track technology, manages decelerations during opening and closing and has an electronic self-learning function.

The main functions include: automatic closing, rapid closing, partial opening and manned operation.

Table of manoeuvres AERF SIMPLY with built-in receiver for 1 230V motor designed to drive centre axle rollers with a maximum power of 736W and planned for the end of the race.

Open source built-in receiver the keeloq type at 433,92 MHz (SIMPLY 1H4) or 868 MHz (SIMPLY 1H8).

Electronic switchboard Motorline MC75 for indoor roller shutter motors and indoor tube shutter motors. What. It incorporates a 433 MHz RollingCode receiver with a capacity of 30 codes.

Basic Control Panel Clemsa CLAS10 for tilting doors. What. Residential use 230V. Maximum power 750W. Programmable opening and closing time from 6’’ to 70’’.

Control panel for sliding doors and barriers with 1 motor 24Vdc. What. Selection of functions through a display. With obstacle detection and device self-diagnosis. Control panel with control of a transmitter via display. Includes TCT transformer.

Manoeuvre chart for an engine, without radio and LED light indicators at the entrances, ideal for automating center-axle rolling shutters.

Table MONO 1H0 does not include receiver card so we can add a free plug-in card (SRT-255) or an encrypted card (MICRO-TARJ) to use protected controls.

Electric lock box with integrated receiver and transformer for opening doors of an electric lock by remote control.

Programming of the emitters is carried out by simultaneously pressing the P1 button of the receiver and one of the buttons (channels) of the emitter. Up to 85 controllers can be linked. The transmitter has two channels, allowing the opening of two doors provided with two receivers.

The DORCAS 45 series is a reversible and small electric lock for a better facility.

Autonomous control panel for pedestrian door(includes battery). Residential use 230V with power supply voltage 230V, with 30W and output to Electric lock or free of power.

Control panel Clemsa CR81 with built-in receiver Rollingcode Mutancode 433,92 MHz for rolling shutters and blinds.

This kit includes 2 Rollingcode NT2 controllers at 433.92 MHz.

Plant developed to work with three-phase motors from 400Vac to 1500W. What. Ideal for use in STARK, KVM115 and KVM2020 engines.

Table of manoeuvres Aprimatic A40DG designed to control one or two motors at 230V up to 800W per motor.

Container FAAC Model E for electronic cards

Analogue manoeuvring table for 1 or 2 sheet swing doors with built-in receiver. What. Includes electronic deceleration at end of run. Motor thrust force control by torque limitation.

Box receiver Forsa model CRE800 powered at 230Vac for issuers RollingCode Forsa at 868 MHz, with internal memory of 15 codes (expandable with external memory).

It allows two types of operation: step by step and man present.

ALLMATIC control unit for one or two motors at 230 VAC. Selection of functions through a display.

Control panel with control of a transmitter via display. Bluetooth module connection not available.

ALLMATIC control unit for one or two motors at 230 VAC. Selection of functions through a display. With obstacle detection and device self-diagnosis. Central controlled by a transmitter via display.

Table of manoeuvres Forsa "FOR M-22' for one- or two-bladed reciprocating engines residential or community use. Includes built-in 500-code receiver.

Table of manoeuvres Forsa SWING 2 DG for doors with one or two motors at 230 V.

Other, of circular cross-section DEA NET230.

Multifunctional module for opening pedestrian doors by command. Includes receiver module + 2 Falk controls.

Multifunctional module for opening pedestrian doors by command.

Three-phase control panel Pujol The Master Pro III at 230 V/400 V.

Control panel for two 230 V retractable actuators. What. Power supply 230 Vac 50-60 Hz. Maximum load of the motor 1000 W. Power lock output 12 V 2A.

Table of manoeuvres TMP for the 24V LOW range of hydraulic motors incorporating a built-in 433,92 MHz receiver compatible with the controls TMP TRIM and LINK.

Control panel for one 230 V retractable drive. What. Power supply 230 Vac 50-60 Hz. Maximum load of the motor 1000 W. Power lock output 12 V 2A.

Operating table or replacement electronic plate DEA model of the vehicle for sectional motors DEA SPACE 702S of 24 V.

Table of manoeuvres V2 EASY2 230V analogue for roller blinds with courtesy light and automatic closure.

Table of manoeuvres V2 EASY1 230V analogue for blinds, blinds and awnings with built-in receiver 433.92 MHz.

Table of manoeuvres V2 EASY-BASIC an analogue 230V with built-in receiver for roller shutters.

Basic Control Panel Clemsa Class 10.1 for hinged doors. What. Residential use 230V. Maximum power 750W. Programmable opening and closing time from 6’’ to 70’’.

" THE MODEL CLASS 10.1 HAS BEEN WITHDRAWN AND IS REPLACED BY THE MODEL CLASS 60 (FOR COMMUNITY SLIDING DOORS OR SLIDING DOORS), OR BY CLASS 10 (FOR RESIDENTIAL SLIDING DOORS) "

Table of manoeuvres V2 EASY-LUX for rolling shutters with courtesy led light and buttons.

Special 220V receiver base for electric locks or electric locks. What. It has independent terminals for output at 12Vac, 12Vcc or 24Vcc.

Ideal for controlled door opening (doors, office, etc.), controlled by remote control, or by an external button.

Allmatic manoeuvring chart of the BIOS2 model 24Vfor the control of 1 or 2 blades at 24 Vdc without encoding. Compatible only with ALLMATIC 24V motors.

MC200 is an electronics switchboard enabling the control and operation of a motor for the automation of a blind, or a sliding door, or a sectional door, or a curtain, or other similar applications.

Compatible with the IT4WIFI module to be able to open and close via a mobile device (Android or iOS) thanks to the built-in WiFi connectivity.

Control panel CLAS 1 for rolling stock and 230V blinds. What. Maximum operating power 750W. Programming by pulse.

Control panel Clemsa CLAS 60 for rolling and sliding actuators 230V. What. Maximum operating power 1000W. Programming by display.

Control panel with built-in receiver Clemsa CR81 (433 MHz) or CR81.8 (868 MHz) for retractable closures.

The Control Panel Clemsa CLASS 5 is designed to govern automatic doors of intensive use, sliding, tilting and folding type with 1 and 2 blades, with single and three-phase drives of 230 V AC or 380 V AC and up to 1500 W of power.

PUJOL JUNIOR control panel for roller shutters incorporating a receiver open source radio frequency compatible with PUJOL VARIOCODE transmitters with a frequency of 433 MHz

NICE A01 manoeuvring chart of 230 Vac, for single-phase motors with retractable doors, not automatically closed. It incorporates a RollingCode 433.92 MHz receiver for the Flo, FloR and Smilo transmitters.

BOX NICE A01 HAS BEEN REPLACED BY THE NEW MODEL MC200, CLICK HERE TO SEE IT.

Special 220V receiver base for electric locks or electric locks. What. It has independent terminals for output at 12Vac, 12Vcc or 24Vcc.

Ideal for controlled door opening (doors, office, etc.), controlled by remote control, or by an external button.