Table of manoeuvres BFT "ALCOR' for 1 or 2 230V pulsating operators with built-in receiver.

The control panel has: for use in the manufacture of motor vehicles [1] used in sliding doors, with control of a sensitive bar and the possibility of checking security entrances. You can also manage the connection with an EBP electric lock or an ECB (with an additional ME card).

The radio receiver has been incorporated with variable code technology.

The terminals are colourful and removable to manage the cables with greater agility.

Control panel BFT "WALENA SW2' with DIP switch and potentiometers for one or two operators of 230V/400+400W used in hinged and folding industrial doors, with management of a sensitive bar and the possibility of checking security entrances.

It can manage the deceleration of the gate in both the opening and closing phases. You can also manage the connection with an EBP electric lock or an ECB (with an additional ME card).

The radio receiver has been incorporated with variable code technology. What. The swing doors are colourful and removable to manage the cables with greater agility.

Table of manoeuvres Forsa "PNG-20' 230 V for tilting and swinging doors of 1 or 2 sheets.

Box PNG-20 is provided with a socket to insert radio frequency and traffic light receiver cards.

PUJOL VARIOPASS station with access control at 433.92 MHz, capacity 2,000 codes. Two expandable channels up to 5.

Medva "VERSUS I20ES" triphasic 230/400 V, absolute or end-of-race encoder, with configurable inputs and outputs.

Electronic plate Oxygen CIRCE 230V for residential sliding doors.

Front cover with OPEN-CLOSE-STOP buttons for steering wheels Erreka I LIVE.

Front cover with OPEN-STOP buttons for steering wheels Erreka I LIVE.

Table of manoeuvres DITEC LCU30H for 1 or 2 motors at 24 Vdc with display programming.

The boards of the Ditec LCU series make it possible to easily configure, by means of the display, the operating modes and to control at all times the position and speed of the, allowing regulation of acceleration, deceleration and start time, deceleration space and approach speed in opening and closing. Thanks to the additional plug-in cards it is possible to further expand the functionalities of the facility with self-controlled security bolts, magnetic loop detector, Bluetooth module.

Table of manoeuvres CAME 2ZE5 for tilting engine E456.

Table of manoeuvres Motorline MC50KVM single-phase 230V with up/down/stop pusher developed for the automation of sliding, tilting, sectional and passage barriers.

Table of manoeuvres Pujol JUNIOR CLICK with radio brake release for retractable doors. What. Electronic plate with built-in receiver at 433,92 MHz compatible with VARIO transmitters with a capacity of 100 codes.

Electronic chart EMFA CRF MINI with force regulation for electromechanic.

Electronic control panel EMFA CRFEM with force regulation for electromechanical + hydraulic.

Table of manoeuvres Aprimatic A40BS for 1 or 2 36V Brushless hydraulic operators with absolute position encoder.

Table of manoeuvres Aprimatic BT40 DG for 2 electromechanical operators 24Vdc with or without running ends. What. Programming of parameters by LDC screen.

Table of manoeuvres Aprimatic A80DG for electro-mechanical sliding door operators at 230 Vac with running ends. What. Self-learning and parameter programming by LCD screen.

Table of manoeuvres Aprimatic SC230 analogue for electro-mechanical operators of 230Vac with running ends. What. Anti-crush function by torque limitation.

Control panel programmable for one or two switches with 230V switching power supply. What. Stand by system.

Maximum load of the motor 800 W. Power lock output 12/24 V dc/ca. Output of accessories 24V DC.

Operating logicsemi-automatic, automatic, semi-automatic step by step, automatic step by step, automatic safety step by step, man present. Pause times, soft stop, delay opening time programmable.

Control panel Clemsa Class 62.C for sliding door actuators 230 V to 700 W. What. Soft stop and anti-crush system with encoder. Connections for garage light and traffic card. Supply voltage from table 230Vac. Programming by display.

Control panel Clemsa CLAS 60 T for sliding and tilting drives with 380V or 230V 3Ph supply. What. Maximum operating power 1200W. Programming by display.

Control panel Clemsa Class 30.1 for the actuation of 24Vdc sectional roof doors. What. Residential use. This is a manual/automatic/semi-automatic.

Control panel Clemsa CLAS25 for 24V tilting and sliding actuators. What. Maximum operating power 150W. Programming by pulse.

Table of manoeuvres Pujol SENIOR 1 analogue for swing doors with electric lock output.

Other, of circular cross-section DEA NET230.

The MC50 is a 230V single-phase electronic switchboard developed for the automation of sliding doors, sectional doors and barriers.

Central Motorline MC60 developed to work with 1 24Vdc motor, with maximum power of 120W each. It also includes the following characteristics:

Central Motorline MC70 230Vac for TUB and Rolling motors up to 500W.

Table of manoeuvres Beninca BRAINY for 1 or 2 actuators at 230 V ideal for swinging, sliding or swinging doors.

Table of manoeuvres Motorline 230Vac MC52 developed to use 2 vibrating motors up to 500W per motor.

Central command Nice DPRO924 for 24V sectional door motors, other, of circular cross-section, suitable for Sumo.

Painting Nice D-Pro 500 for single-phase 230V or three-phase 400V motors with mechanical and electronic running ends.

This is a universal maneuver chart DEA NET24N with screen and box 100 G, for 1 or 2 24 V DC motors, with or without magnetic encoder.

One-step selection of the type of engine used (slide, swing, tilting, barrier, sectional door, pylon), with automatic configuration of all inputs/outputs and usage parameters. Factory setting for sliding doors.

Control panel for sliding doors and barriers with 1 motor 24Vdc. What. Selection of functions through a display. With obstacle detection and device self-diagnosis. Control panel with control of a transmitter via display. Includes TCT transformer.

Control panel for sliding doors and barriers with 1 motor 230Vac. What. Selection of functions through a display. With obstacle detection and device self-diagnosis. Control panel with control of a transmitter via display. Includes TCT transformer.

If the vehicle is equipped with an electric motor, it shall be equipped with an electric motor.

Designed for use in GEARBOX engines.

Control panel CAME ZL65 24V for one- or two-bladed swivels, with programming display, built-in radio decoding and self-diagnosis of security devices.

Control panel CAME ZL OF 24V with a graphic display for swinging candles.

Control panel CAME Z3P for use in the manufacture of motor vehicles [1] regulation of deceleration speed. What. It doesn't incorporate a receiver.

Control panel CAME ZM3E multifunction 230V for two-bladed displays signalling graphics, self-diagnosis of safety devices and built-in radio decoding.

Central command Nice Moonclever MC424L for 24 Vdc sliding door motors, without encoder, with integrated receiveror and ready for Opera and Solemyo system.

Table of manoeuvres Nice MC800 for 230 V swing door motors with BlueBUS technology and Opera system.

With technology Nice BlueBUS, compatible with the Opera system, for the management, programming and diagnosis of automation, also remotely.

Compatible with the Opera system which, through the O-View multifunction screen, allows you to customize the system by modifying the opening and closing positions, the leaf gaps and decelerations, changing for each motor parameters such as, for example, force, speed, sensitivity to obstacles.

This is a universal maneuver chart DEA NET24N/C with screen and box 100 G, for 1 or 2 24 V DC motors, with or without magnetic encoder.

One-step selection of the type of engine used (slide, swing, tilting, barrier, sectional door, pylon), with automatic configuration of all inputs/outputs and usage parameters. Factory setting for sliding doors.

System to control capacity a business, office, swimming pool or commercial premises in a simple and intuitive way.

Autonomous operation. What. All you have to do is type in the maximum capacity you want for the establishment.

Range of maneuvers Erreka VIVO to power sliding, sliding or tilting doors with 1 or 2 actuators at 230Vac or 24Vdc.

VIVO frames do NOT incorporate a built-in receiver, but are iRRE2 and IRRE2/250 plug-in receivers are compatible to be operated by radio frequency with KUMA or IRIS transmitters.

Special 220V receiver base for electric locks or electric locks. What. It has independent terminals for output at 12Vac, 12Vcc or 24Vcc.

Ideal for controlled door opening (doors, office, etc.), controlled by remote control, or by an external button.

NICE A01 manoeuvring chart of 230 Vac, for single-phase motors with retractable doors, not automatically closed. It incorporates a RollingCode 433.92 MHz receiver for the Flo, FloR and Smilo transmitters.

BOX NICE A01 HAS BEEN REPLACED BY THE NEW MODEL MC200, CLICK HERE TO SEE IT.