Receptor CAME RKLT-W50 for mechanical tubular motors up to 50 Nm and 500 W.

Garage control Nice MYGO2 Monodirectional 433 MHz.

PUJOL WINNER PRO 600/200 Roller door motor designed to automate roller shutters garages and commercial premises, with lifting capacity of up to 170 kg.

The WINNER PRO engine does not incorporate electrofreno and is designed for 48/60mm shafts and 200/220mm pulleys.

Keyboard Erreka with a thickness of not more than 10 mm for access to housing or commercial premises. With output of 2 NA/NC relays and up to 250 codes.

Twin ACM Titan double coil for roller axis Ø60 blinds with lifting capacity of up to 280kg. The engine has electrofrain for the lock of the blind and its corresponding unlocking by handle.

ACM Titan is designed to Motorize roller shutters of commercial or industrial premises compensated by springs and pulleys of 200 / 220mm As long as your axis is 60mm.

Product discontinued by the manufacturer. Not available for sale.

This model has been officially replaced by a more current version, which incorporates technical and functional improvements.

👉 Recommended substitute product:

I send Nice Domip1 | Transmitter 1 channel for blinds and awnings

Electromechanical safety belt Clemsa, under the supervision of the cable tension and with sensitivity regulation. What. Recommended use for folding doors. Sensitive throughout the course of the band (even extremes).

Electromechanical motor of 24 V dc MEDVA PL500 for sliding doors of residential use up to 500 kg with built-in receiver box and 2 RollingCode controls.

Driving FAAC D600 electromechanical 24 V by drawing for doors other, of circular cross-section and spring swings and counterweights for residential use.

Irreversible 24Vdc motor with integrated control centre and absolute encoder, installed internally in a column of small dimensions, properly drilled.

The first engine Nice slippery for sliding doors up to 400 kg and a blade length of up to 6 m.

Table of manoeuvres V2 EASY-BASIC an analogue 230V with built-in receiver for roller shutters.

Product discontinued by the manufacturer. Not available for sale.

This model has been officially replaced by a more current version, which incorporates technical and functional improvements.

👉 Recommended substitute product:

Electromechanical motor ABAB SL Medium for community or industrial sliding doors up to 1000/1200/1500 kg

Tube motor Motorline designed to power chest-type arm curtains, allows the application of various accessories to work with all types of pipes.

End of race spare 748 D

Piston assembly hydraulic lock for unlocking the hydraulic motor Erreka OTHER. What. Includes a 1-meter whip.

Table of manoeuvres BFT "THALIA' with screen for one or two 24 V electromagnetic operators used in 230 V/500 W swing doors (in the Power version). The bi-channel radio receiver at 433 MHz has been incorporated.

It has an anti-crushing system based on D-Track technology, manages decelerations during opening and closing and has an electronic self-learning function.

The main functions include: automatic closing, rapid closing, partial opening and manned operation.

Kit Magnetic keys for manual key fitting Clemsa without the need for a duplicating machine.

OXIBD plug-in receiver kit with two-way 433 MHz Era One BD transmitters.

External 230 V MICRO receiver2 channel, with a capacity of 400 codes or 1,000 codes, to be configured with the PC-Copy duplicator.

Multiple card connector Clemsa for use in the manufacture of motor vehicles Clemsa with exits from connection 4 pins + 6 pins.

Table of manoeuvres Motorline 230Vac MC52 developed to use 2 vibrating motors up to 500W per motor.

PUJOL model WINNER PRO 600/200 designed to automate rolling shutters for garages and commercial premises, with lifting capacity up to 170 kg.

The WINNER PRO engine has no electro brake and is designed for 48/60mm axles and 200/220mm pulleys.

Bluetooth receiver + radio frequency Oxygen Smart,allows you to open your automatism via Android or iOS app as well as by radio frequency with the 433 MHz controls Venus of Oxygen.

Quick support Erreka SENA-C for compact drawer.

Table of manoeuvres V2 "FLEXY' analogue 230V for sliding and swinging doors.

Table of manoeuvres Oxygen URANIA with 433 MHz built-in receiver for 230 V rolling motors.

The KIT contains 2 RollingCode 433.92 MHz controls.

The electronic plate Oxygen URANIA is designed to be installed in engines:

• Center shaft roller shutters

• Tubular motors for household blinds

Opla wall mount for NiceWay buttons.

Discreet, elegant and functional: Very thin - as much as the single plate - the transmitters, located on the Opla wall plate, allow you to add control points in a discreet and elegant way without masonry work.

NiceWay's Opla wall plates are available in square Opla-S and rectangular Opla-R versions, and in numerous color variants.

Column FAAC for photoportable cells with a height of 50 cm.

Sectional engine Forsa DELTA for residential sliding doors up to 18 m2 with built-in receiver box and manual unlock.

Automatic self-locking 24Vdc for residential sectional doors and overhangs In the case of vehicles of categories N1 and N2.

Fuelle type anti-pinch rubber in coils of 10 or 20 meters to protect the fingers on the hinges edges.

Garage crew Nice MYGO4 monodirectional 433 MHz.

Engine Nice Wingo WG3524 24V electromechanical for swing doors up to 3.5 meters per leaf.

Hydraulic motor HYDOM 4LR Semi-Intensive for swing doors for residential use up to 3.5 metres per blade. What. The actuators are powered at 230V and have 250mm stroke, hydraulic damping in opening and closing, available version without lock and with double lock.

Hydraulic motor HYDOM MINIMAX for semi-intensive use for oversized two-bladed hinged doors (maximum 14m2). Allows manual opening and closing in the event of a power failure.

Maintenance on this engine is practically zero.

KIT engine Clemsa "AB10BC' electromechanical 230V for residential counterweighted tilting doors up to 10m2.

The actuator has the manoeuvre chart CLAS107 incorporated, irreversible locking system with mechanical locking so no locks are required. The manual interior unlocking allows us to actuate the door manually in case of lack of electric current.

Electromechanical engine Clemsa AA400 for swing doors up to 4 metres in length by leaf, designed for motorized residential use door. What. The model "AA400 424 B" allows us to perform a semi-intensive use motorization.

External engine unlocking Erreka sections for emergency locking.

KIT engine Pujol Marathon PRO Q II single phase for sliding doors up to 1000 kg residential, community or industrial. Equipped with electronic board and built-in receiver.

Integrated frame replacement Erreka for sliding door motor TORUS KM1800 and TORUS INVERTER TO 1800.

I command Motorline MX95N 1 channel with an innovative and functional design, with support included.

Driving FAAC D1000 electromechanical 24 V by drawing for doors other, not further worked than hot-rolled and spring swings and counterweights for residential use.

Motor reducers DEA OLI/N hydraulic 230V rod 270/400mm for swing doors.

Optimal materials, compact structure and adjustable power allow their use even in continuous working situations. Precision mechanics and the use of hydraulic oil as a motor fluid are the secret to a quiet movement.

Installation is quick and easy and requires no modification of the door structure.

Hydraulic oil 1 litre DEA reference 600H.

Engine Nice 24 V SPINBUS with magnetic encoder for sectional doors of up to 17,5 m2 and tilting doors of up to 14,7 m2.

Irreversible electromechanical gearbox motor 230 Vac for residential use, 24 Vdc motor with magnetic encoder. Use with SNA30 - SNA31 strap guides or SNA30C - SNA31C chain guides.

AURA is an LED flashlight available with power supply: 230V and 24V. In both versions the visual signaller integrates into the circuit an antenna and a 433MHz receiver. The length of the cable is 5m.

Motion detector FAAC XBFRM1 (single directional microwave radar).

Iron guide 1 piece with chain for Rosso Evo engines Motorline.

Electromechanical engine Beninca 24V JM for sectional doors up to 22m2 with chain or belt guide and anti-crush system.