Bistable and monostable Bicyanal receiver; With a box included; Capacity for 500 codes Rolling Code.

The Bicanal Radio MR5 receiver allows remote control of electrical and electronic equipment with one or more radio controls.

Professional outdoor antenna Erreka KRAET, metal support and powerful with 4m rG-58 cable backed with connector.

PUJOL 'ACTIVE' wired external receiving antenna compatible with RollingCode 433 MHz transmitters.

Receiver AERF "SRM 1L4255" for outdoor use 12/24V with 1 channel, rolling code 433.92 MHz.

Receiver AERF "SRM 2H4255' for outdoor use 230Vac with 2 channels, rolling code 433.92 MHz.

Interface for connecting the O-View programming unit.

Modular receiver Aprimatic RX4MF 433 MHz 4-channel, fed at 24V with 70 code capacity.

It allows use of 4-channel remote controls and selection of mono-stable or bi-stable operating mode for each channel separately.

Removable memory card GO FORSA with capacity for 500 users.

A one-channel receiver operating in both mono-stable and bi-stable mode, capable of storing up to 500 12-bit or Rolling-Code codes.

It's only compatible with the controls Motorline model FALK and MX4SP.

A one-channel receiver operating in both mono-stable and bi-stable mode, capable of storing up to 500 12-bit or Rolling-Code codes.

It's only compatible with the controls Motorline model FALK and MX4SP.

The kit includes 2 units of the FALK emitter.

Receiver AERF "SRM 1L4255" for outdoor use 12/24V with 2 channels, rolling code 433.92 MHz.

MCONNECT LINK is a tool for installers that allows us to configure all the parameters of your power plant Motorline through Wi-Fi either in person or remotely.

Outer receiver V2 model WALLY of 1, 2 or 4 channels at 433,92 MHz or 868 MHz.

The outer receiver Clemsa Mutant code RN44 is the most versatile of the family of Clemsa, and a width of not more than 50 mm, with a power supply of 230 Vac or 12/24 Vac/dc. Frequency 433.92 MHz or 868 MHz.

Receiver 12/24v fixed (trinary) code and rolling code at 433,92 MHz or 868 MHz.

Operating with Trinitary Fixed Code or RollingCode Variable Issuers. Receiver with RSD radio module with connector allowing modification of working frequency. With 2 programmable channels with logic of operation mono-stable, bi-stable or timed.

Receiver 12/24V 433 MHz 1 channel.

Receiver 12/24v fixed (trinary) code and rolling code at 433,92 MHz or 868 MHz.

Operating with Trinitary Fixed Code or RollingCode Variable Issuers. Receiver with RSD radio module with connector allowing modification of working frequency. With 2 programmable channels with logic of operation mono-stable, bi-stable or timed.

FAAC XR2 868 C external bi-channel receiver / 4 channels at 868 MHz. What. External receiver (system with decoder integrated in a custom case for external use).

Compatible with controls XT-2 and XT-4 which you will find under "Product Accessories".

Pre-wired aerial receiver Nice 2 channel transmitter compatible Nice it shall be capable of operating at a frequency of 433,92 MHz (FLO, SMILO and ERA INTI).

TRTA channel expansion card compatible with receivers Forsa.

Receiver Beninca ONE.2WB of 433,92 MHz with a power supply of 12÷28 Vdc / 21÷28 Vac, 2 channels with triple coding: Advanced rolling code, rolling code and fixed code.

This is a universal receptor, wired and powered at 12/24V up to 400 users with 2 channels a frequency 433,92 MHz or 868 MHz.

Outer receiver Clemsa MasterCode RV44, frequency 433.92 MHz 4 channel 230Vac or 12/24V ac/dc power supply.

Repeat radio frequency signal at 433.92 MHz and 868 MHz quickly and easily to improve the emission range, only by connecting the repeater to 230 V. The repeater itself will be responsible for receiving the transmission of a control and sending it to the receiver improving emission power to achieve greater range.

Receiver Erreka IRIN4B 4 relays for fixed code or rolling code (variable) at 433,92 or 868 MHz. Compatible with controls Erreka Moon, Kuma and Iris.

Outer receiver Forsa of 230Vac for TP2 emitters at 868 MHz, with capacity for 500 users and 2 relays.

Frequency module FAAC XF 868 MHz, compatible with all devices FAAC they are equipped with OMNIDEC universal coding systems, recognisable by the logo applied.

Receiver FAAC RP 868 SLF plugged in, fast-coupling (compatible with all electronic devices FAAC of a kind used in motor vehicles 5 pin rapid coupling, or external utility by connecting to the interface of the accessory RP relay).

Receiver V2 WALLY2 bi-channel 230V with capacity for 240 users and with load control capability up to 1500W. Version at 433 MHz and 868 MHz.

Receiver V2 RXP4 modular 12/24V with display, frequency 433,92 or 868,30 MHz. Function personal pass – royal.

Small module for opening garage door by a short burst of light, compatible with both cars and motorcycles.

The module has a jumper to select the voltage input as either positive or negative. Normally when it comes to halogen light it sends the voltage as positive, and for LED light it sends the voltage as negative.

Memory Clemsa TM400 MUTANCODE of 400 users.

Compatible with frames and receivers Clemsa from the MUTANCODE series.

The universal receiver BFT Clonix 2E, you can connect any manoeuvring box on the market that has a voltage output of 12/24VAC/DC.

This receiver card has two channels for pulsing two actuators or electronic devices.

It has capacity for 128 additional transmitters in auto coding the working frequency is 433.92MHz

Receiver DEA external bi-channel with capacity to store 1000 emitters.

Radio and central receiver NICE TT2N in miniature for the for use in the manufacture of motor vehicles.

Grade of protection IP20.

Simple and fast programming: using the dedicated key.

The presence of a signalling LED helps to follow the correct programming procedure by indicating, for example, exceeding the thresholds programmed in the climate sensor.

Receiver kit Nice long range OXILR with two-way emitters and a universal adapter for frames from other manufacturers.

Central FORSA CCA-868 500 U., is an access control for 500 users with integrated receiver. What. It allows recording 868 MHz transmitters as well as bi-technology transmitters. Includes connection of proximity readers for card and key management.

Thanks to the display, the devices recorded in the memory can be up and down, it also includes input for event cards, for greater management capacity in access control.

4 channel receiver Beninca ONE.4WB with power supply with extended switching range (90÷255 Vac) with triple coding, Advanced Rolling Code, Rolling Code and Fixed Code. What. ARC encryption ensures maximum security thanks to the length of the transmitted code (128 bits) and the high number of possible combinations

Receiver Nice OX4T which belongs to the ONE series and has a built-in transmitter where it can act as a repeater.

Bichannel receiver at 433.92 MHz in container, allows a very high degree of security for remote access control. What. The RX2C receiver is capable of operating with Apricode controls.

RX2C have 2 channels with relay output normally open.

External receiver Came RE432M 2 channels and multi-user, working frequency 433.93 MHz and 12-24V AC/DC power supply.

Universal PUJOL micro receiver wired for 31 users RollingCode 433.92 MHz.

The power supply of this receiver is at 12/24 Va/Dc, 1-channel mono-stable.

External receiver BFT "CLONIX 2E AC U-LINK 230' with built-in receiver 433 MHz, compatible with the U-LINK protocol (equipped with 3 connecting slots). The Receiver is powered at 230Vac and has a memory capacity of 2048 users.

Receiver BFT "CLONIX 4 RTE' 230V RollingCode of four channels at 433 MHz.

Outer receiver KINGGATES FRED 2 channels RollingCode is 433 MHz.

" THE FRED MODEL 2 WE'VE GOT HIM OUT. _ FREDDY2 WITH THE CHARACTERISTICS"

Wired receiver Clemsa Mastercode "RMV 2U" 12/24V 433 MHz with two channels.

The universal receiver 'RMV 2U' is fed to 12/24V ac/dc to be able to be connected in any manoeuvring frame which has an alternate button output.