Rotate rear support to HyDom engine Lineal series.

Handles and mechanical locks swing doors with bolts and keys. What. Needle size 70 mm.

Hydraulic motor Erreka 230Vac ATLAS for residential or community intensive use for doors up to 15 m2 with an obstacle detection system. Available in reversible or irreversible versions and with anti-lock system.

KIT engine Motorline BRAVO524 at 24Vdc with oil and grease lubricated reducer for sliding doors up to 500kg and IP44 protection.

Manufacture from materials of any heading Nice TOO3000 and TOO4500 230 V electromechanical switchgearblades up to 3 m and 300 kg (TOO3000 model) and up to 4,5 m and 250 kg (TOO4500 model).

I'm going to go with the P-1. Designed for revolving doors up to 235 kg weight. What. Suitable for automating locks with side drive and gearbox.

Integrated electronic equipment that allows opening by key, button or remote control. Manual operation by crank.

Receiver 12/24v fixed (trinary) code and rolling code at 433,92 MHz or 868 MHz.

Operating with Trinitary Fixed Code or RollingCode Variable Issuers. Receiver with RSD radio module with connector allowing modification of working frequency. With 2 programmable channels with logic of operation mono-stable, bi-stable or timed.

Automatic barrier Clemsa model B614 operating at 24 V, 100% continuous frequency with a maximum bar length of 2 to 5 metres depending on the bar selected, and an opening time of < 2 s (80o with a bar of 3 m).

Analogue manoeuvring table for 1 or 2 sheet swing doors with built-in receiver. What. Includes electronic deceleration at end of run. Motor thrust force control by torque limitation.

Electromechanical engine EMFA BAT 230V for residential folding doors 1 or 2 sheets, ideal for automating swinging up to 3 metres per leaf.

Electrically operated motor 230V Medva BASIC H4 for use in the manufacture of motor vehicles residential use from one or two leaves up to 10m2.

Hydraulic operator Aprimatic TWENTY 270 for swinging canes one or two leaves, semi-intensive use. Speed deceleration closing. Built-in anti-crush safety valves. Quick emergency release. Useful length of stem 270 mm. Stem diameter is 16 mm.

NICE exterior columns of aluminium for photocells, selectors and proximity readers height of 500 mm and 1000 mm.

Operator Forsa Reversible electromechanical COUGAR in oil bath for intensive use on doors up to 5 metres and/or 400 kg.

Hydraulic operator Forsa HALF TANK for sliding doors of Community use for leaves up to a maximum length of 7 metres.

Outer receiver Forsa of 230Vac for TP2 emitters at 868 MHz, with capacity for 500 users and 2 relays.

Replacement ROA38 for the sliding power plant Nice ROX600.

" Electronic plate ROA38 has been replaced by the new plate OTHER which is fully compatible "

Center axle coil motor Motorline model ROLLING SP with a lifting capacity of up to 160 kg with electro-brake, for a pulley of 200 mm and an axle of 60 mm.

Emfa series engines ROT COMODIN SUPER are designed to automate counterweight tilting doors up to 14m2 for intensive use, ideal for large communities.

KIT engines Erreka SIRIUS electromechanical 230Vac and 380Vac by chain transmission for industrial sliding doors of up to not more than 50 m2, with electromechanical race finishes.

Emissor DOOYA 15 channels 433.92 MHz for internal shutter motors NOVELFORIS, SUBLIMEX (with sailing function).

The remote provides a plastic finish with a digital display to switch between channels to make it work up to 15 domestic blinds. It incorporates a magnetized base to place the command on the wall.

The frequency of the emitter is 433.92 MHz and is fed with a 3V lithium battery (CR2032).

a

Control of household blinds Somfy this Regulation shall be binding in its entirety and directly applicable in all Member States unidirectional 5 channel frequency 433,42 MHz.

Control panel Clemsa CR81 with built-in receiver Rollingcode Mutancode 433,92 MHz for rolling shutters and blinds.

This kit includes 2 Rollingcode NT2 controllers at 433.92 MHz.

Engine Aprimatic SR350 electromechanical for use in the manufacture of motor vehicles [1] residential overhangs up to 3,5 metres by leaf and 300 kg weight.

The electromechanical operator is sturdy and is built on an injected aluminium chassis and coated with polyester paint. Available in reversible and irreversible format.

L JDM vehicle magnetic loop detector Erreka for 1 or 2 loops, mainly used to detect vehicles, with 2 two-way relay outputs.

Electromechanical engine Clemsa AA 400 for folding doors up to 4 metres in length per sheet, of semi-intensive residential use (model 230V).

The kit includes a 400mm barrel engine locked with gearbox, receiver and controls.

External receiver FORSA RT-500 at 230 Vwith a capacity of 500 users for NEO RT transmitters.

Engine Aprimatic Wave 1024 to 24V for sliding doors up to 1000 kg.Ideal for residential doors of intensive use.

Operator at 24 Vcc for sliding door up to 1000 kg. Intensive use. It incorporates the maneuver board, with anti-crush system to reverse the maneuver in case of detection of obstacles. Personalized lock unlock in case of power failure.

Pro'sKit flat ceramic screwdriver 1PK-034ND is a screwdriver with the edge made of zirconium dioxide. What. Pro'sKit 1PK-034ND ensures maximum safety at work, as it is thermally and electrically insulated, antimagnetic and antistatic.

Garage control Hörmann HSE4 868 BS BiSecur frequency is 869.3 MHz.

Chassis clip plate 50 x 68 mm for the MONDRIAN 4 of Ø 35 mm

For use in the manufacture of motor vehicles CAME 40 X 0,6 MM MONDRIAN 4 Ø 35 mm, whether or not on a backing.

Designed as a comprehensive solution, the ZUMA barrier was developed with an extendable mast in different sizes as needed to promote easy and efficient transport.

We highlight the innovative mast application system, in which from a model it is only possible to transform the barrier to the left or right, which allows for efficient stock management.

In terms of finishing quality, it goes through the process of galvanizing and lacquering, ensuring greater durability to the product.

The barrier universe has been renewed!

Proximity sensor Motorline MB17 for opening doors without direct contact.

Extremely functional and practical, this new sensor is the ideal solution for situations where it is not possible to press/tap a button to trigger the opening of a door.

Manufacture from materials of any heading Erreka ARC 230V for articulated arms for swing doors up to 2,5 m with wide pillars. What. The arms are available in 450mm or 650mm.

Motor centre axle ACM K535 EF, with 1 coil electrophrene removed for 60 axle and 200mm pulley, for roller shutters up to 260 kg.

Garage command Trinario Celinsa AK-1 which replaces the old Clemsa TX-1 with frequency 30.035

The encoding of this emitter is done by micro dip switch's.

Receiver Nice OX4T which belongs to the ONE series and has a built-in transmitter where it can act as a repeater.

Kit's OXYGEN SARGON 230V electromechanical motors for residential swing doors up to 4m in length per sheet.

The SARGON series engines have a 400 mm stem and are designed for use in lightweight doors up to 250 kg.

Rechargeable battery CR2032 of 3.6V to replace BMW.

MINGARDI MICRO+ chain actuator for hanging windows.

Drive rod for the lid with hinged windows and sash windows.

CAME omega Q10 between 44 and 48 mm

Other, of a kind used for motor vehicles. What. 230v input and 12/24v output.

For the purposes of this Regulation: Nice; SHEL50KCE, SHEL75KCE, SPIN10KCE, SPIN11KCE, SPIN21KCE, SPIN22KCE, SPIN23KCE, SPIN40/A. THIS IS NOT THE FIRST TIME I'VE SEEN THIS.

Intratone Mifare keys are of excellent quality, ergonomic and robust, electronic badges Intratone allow access protected by a proximity reader. What. Exclusively, Intratone allows you to ensure the safety of your building. What. From now on, for intercoms Intratone, each badge is unique. Thus, to avoid the proliferation of unknown badges: 1 declared badge = 1 badge.

Battery kit with integrated charger BFT BAT-associated emission levels for emissions from combustion plants.

The quick and easy-connect battery backup kit allows the operator to work when the electrical current at 230V is lost. The 24V battery backup system can be installed in the motors BFT in the case of products of the series DEIMOS BT A, DEIMOS ULTRA, ARES BT A, ARES ULTRA.

The charger will be responsible for recharging the batteries when they lose their charging capacity.

Replacement electronic plate Clemsa CLAS 305 for the operation of slides with a maximum power of up to 700 W of power. What. It has optional anti-crush system with encoder.