New products

Showing 49-72 of 117 item(s)

Manufacture from materials of any heading

Photocell Prastel Foto-R ORIENTABLE 12-24V Up to 30 meters

The photocell Prastel Foto-R is a wired and adjustable safety device for automatic doors, gates and motorized cancers. Its regulation system allows precisely aligning the TX emitter and the RX receiver, even when they can not be installed fully confronted. Has a 180 ° adjustable head in horizontal and 30 ° vertical, LED indicator of alignment and test...

Pedestrian Swing Gate Motors

Function selector with door keyboard CAME Fluo (818XA-0075)

CAME

818XA-0075

€121.00

CAME 818xA-0075 is a function selector with numeric keypad designed to manage automatic pedestrian doors of the FLUO range. It allows you to easily select the main operating modes of the door and protect access to the configuration using a numerical code. Its tactile interface, compact and intuitive facilitates daily control of automation CAME to Sliding...

Replacement plates

Maneuvering EMFA ComEC 20 He for 230V sliding engine

EMFA

211147

€265.00

Electronic box of replacement maneuvers for industrial sliding engine EMFA Comec 20 He. This central one allows you to manage a single-phase 230 V AC motor and replace the original automation frame when it has a fault or malfunction.

Batteries for Automation

CAME 818XC-0038 | Kit de baterías para FLUO-SW2 y FLUO-SW3

CAME

818XC-0038

€172.00

Control Panels

CAME ZT6N | 400V three00V to 3200 W three-phase maneuver box

CAME

002ZT6N

€283.00

CAME ZT6N (002ZT6N) is a maneuver box for industrial automations CAME of 230-400 V, developed to control high power motors installed on sliding, sectional, folding doors and other industrial enclosures. Is the updated substitute for the previous painting CAME Zt6 and incorporates new control and safety functions, such as the self-diagnosis of photocells,...

Spare parts

End of Electromechanical Sliding Motors EMFA and protect

EMFA

210119

€59.00

End of Electromechanical Race Designed as replacement for automatic sliding door motors of brands EMFA and Proteco. This mechanism allows detecting when the door has reached the end of its route, both during opening and during closing, sending the signal corresponding to the maneuver box to stop the engine safely.

Motor kit VDS Geko 230V for residential sliding doors up...

Motor kit VDS Geko 230V for residential sliding doors up... 2

Sliding Gate Motors

Motor kit VDS Geko 230V for residential sliding doors up to 400 kg

VDS

KIT GEKO 400K 220V

€230.00

motor kit VDS Geko It is designed to automate Sliding doors up to 400 kg. Includes the gearmotor VDS Geko with built-in radio maneuver and receiver box, two remote controls, a game of photocells and four meters of nylon zipper. The engine runs to 230 VAC and has Electromechanical race end, User unlocking by key and electronic regulation of force. Your...

Outdoor receiver VDS SMR220 2 channels 433,92 MHz 230V

Receptors

Outdoor receiver VDS SMR220 2 channels 433,92 MHz 230V

VDS

E003

€56.00

Outdoor receiver VDS SMR220 C2 It is a radio receiver of two-channels, Designed to control automatic doors, garage doors, cancelas, barriers, blinds and other automation systems. It has a feeding 230 VAC and has Two exit relays With normally open contacts, normally closed and common. This allows you to connect it to maneuver boxes that have an opening...

Sliding gate accessories

Cable de Acero Galvanizado Ø5 mm para Puertas Correderas Telescópicas – Bobina 25 m

Esmiper

30002008.25

€49.00

Spare parts

Rear hairpin kit FAAC for engines 400, 402 and 422 | 4900645

FAAC

4900645

€18.30

Back fork kit FAAC 4900645 It is an original spare part for the subsequent fixing of different hydraulic motors FAAC For swing doors. This fork allows to attach the back of the engine with the fixing bracket installed on the pillar, providing a resistant anchor point and allowing the automatism to correctly pivot during opening and closing maneuvers.

Motor kit VDS EGO 230V For 2-leaf swing doors up to 2.5 m

Electromechanical swing motors

Motor kit VDS EGO 230V For 2-leaf swing doors up to 2.5 m

VDS

KIT EGO 2 HOJAS 230V

€295.00

Motor kit VDS Ego 230v It is a complete solution to automate Two-leaf beating doors, with a maximum length of 2.5 meters and a weight of up to 200 kg per leaf. The kit incorporates two electromechanical actuators VDS EGO 230V C400, equipped with a 400 mm stroke, aluminum structure and stainless steel stem. The engines offer a maximum thrust of 2,000 N and...

Motor kit VDS EGO 24V for 2-leaf swing doors up to 2.5 m

Electromechanical swing motors

Motor kit VDS EGO 24V for 2-leaf swing doors up to 2.5 m

VDS

KIT EGO 2 HOJAS 24V RAPID

€380.00

Motor kit VDS Ego 24v It is a complete solution to automate Two-leaf beating doors, with a maximum length of 2.5 meters and a weight of up to 200 kg per leaf. The kit incorporates two electromechanical actuators VDS EGO 24V C400, equipped with a 400 mm stroke, aluminum structure and stainless steel stem. Its 24 VDC feeding allows soft, silent and suitable...

Tubular CAME Edison B4 13 NM with rechargeable battery |...

Tubular CAME Edison B4 13 NM with rechargeable battery |... 2

Tubular Motors for Blinds & Awnings

Tubular CAME Edison B4 13 NM with rechargeable battery | 809y4-0020

CAME

CAME EDISON

€142.00

The CAME Edison B4 809Y4-0020 is a Tubular motor of 35 mm and 13 nm, designed to automate blinds and rolling closures through Integrated rechargeable battery. Allows you to make a Wireless installation, without power wiring up to the engine. Incorporate Electronic Career End with Encoder and Radio Receiver of 433,92 MHz Compatible with Emitters CAME of...

Spare parts

Tube group FAAC 415 L (full group of tube and 400 mm stem)

FAAC

63003344

€80.00

FAAC 63003344 is the Full group of 400 mm tube and stem Used in electromechanical motors for swing doors of the series FAAC 415 L. This Original replacement FAAC It allows replacing the outer set of the actuator when it has wear, deformation or damage that prevent the correct linear movement of the engine. In this way, it is possible to repair automation...

Control Panels

Maneuvering V2 ABLE CX EVO2 24V for 2 swing engines

CX EVO2

€250.00

Cx evo2 It is a digital maneuvering box designed for the automation of Swing and sliding doors equipped with one or two 24 V motors. It incorporates an intuitive programming by screen and allows continuously monitoring the status of entries and automation. Its electronics allows you to regulate the power of the motors by means of a power modulation,...

Batteries for Automation

Battery charger ROGER B71 / BC for Brushless Digital Controller

ROGER

B71/BC

€73.00

Roger B71 / BC It is a battery charger designed for brushless digital maneuver boxes Roger Technology B70 / 1DC and B70 / 1T. This module allows you to connect and maintain two 12 V lead batteries connected in series, providing backup power to the automatism in case of failure or interruption of the electric current.

GSM, Bluetooth and WiFi modules

Módulo Wi-Fi Roger B74/BCONNECT para cuadros Brushless

ROGER

B74/BCONNECT

€84.00

Spare parts

Run-up Pujol Winner AC for roller motor

Pujol

2618587

€35.00

Run-up Pujol Winner AC It is a spare part designed to replace the set of race end in roller engines Pujol Winner AC, usually used in roller garage doors, shops and motorized metallic blinds.

Tubular transmitters & accessories

Central V2 CU3, CU4 y CU5 para Toldos y Persianas con Motor Tubular 230V

V2 CU

€59.00

Control Panels

Central electrónica Beninca BRAINY24 PLUS para automatismos de 24 Vdc

Beninca

917603712

€361.00

Barriers of passage

Barrier V2 Nuur6 24V with built-in maneuver frame (no mast)

36A033

€850.00

Automatic barrier V2 24V Nuur6 for the control of residential, community and collective access, designed for steps up 6 meters by using the corresponding mast (not included). This version is supplied with Built-in maneuver box Inside the closet, offering a compact, reliable and prepared solution for precise movement management. Is an ideal option for...

Shaft-drive motors

Axle attack engine kit Erreka Star for industrial sectional doors

Erreka

Kit Erreka STAR

€788.00

The motor kit Erreka Star is designed for automation of Industrial sectional doors, incorporating the engine, maneuver frame and accessories necessary for a complete installation. This product is supplied in 3 Versions of Kit, which can be selected from the drop-down product according to the area of the door, the available power type and the necessary...

Shaft-drive motors

Motor ataque al eje Erreka STAR para puerta seccional industrial hasta 60m²

Erreka

Erreka STAR

€442.00

The engine Erreka STAR is an electromechanical actuator designed for the automation of industrial sectional doors. It is available in single-phase and three-phase versions, with suitable models for doors up 30 m², 50 m² or 60 m², according to the selected reference. The STAR range is designed for industrial facilities that require a robust, reliable and...

Electromechanical swing motors

Motor kit CAME AMICO 24V (A1824) For swing door 2 sheets up to 1.8 m

CAME

001U6111ML

€379.00

CAME 001u6111ml It is a complete range of automation of the range Amico, designed to motorize residential swing doors two leaves. This kit incorporates two electromechanical engines CAME 001a1824 24 V DC with Encoder, suitable for sheets up 1.8 meters. Its 24 V electronics offers smooth, safe and apt operation for intensive use in residential facilities....

Product added to wishlist

This website uses proprietary and third-party cookies to improve our services and display advertising with our preferences through the analysis of our browsing habits. To give your consent when you press the Accept button.

New products

Photocell Prastel Foto-R ORIENTABLE 12-24V Up to 30 meters

Function selector with door keyboard CAME Fluo (818XA-0075)

Maneuvering EMFA ComEC 20 He for 230V sliding engine

CAME 818XC-0038 | Kit de baterías para FLUO-SW2 y FLUO-SW3

CAME ZT6N | 400V three00V to 3200 W three-phase maneuver box

End of Electromechanical Sliding Motors EMFA and protect

Motor kit VDS Geko 230V for residential sliding doors up to 400 kg

Outdoor receiver VDS SMR220 2 channels 433,92 MHz 230V

Cable de Acero Galvanizado Ø5 mm para Puertas Correderas Telescópicas – Bobina 25 m

Rear hairpin kit FAAC for engines 400, 402 and 422 | 4900645

Motor kit VDS EGO 230V For 2-leaf swing doors up to 2.5 m

Motor kit VDS EGO 24V for 2-leaf swing doors up to 2.5 m

Tubular CAME Edison B4 13 NM with rechargeable battery | 809y4-0020

Tube group FAAC 415 L (full group of tube and 400 mm stem)

Maneuvering V2 ABLE CX EVO2 24V for 2 swing engines

Battery charger ROGER B71 / BC for Brushless Digital Controller

Módulo Wi-Fi Roger B74/BCONNECT para cuadros Brushless

Run-up Pujol Winner AC for roller motor

Central V2 CU3, CU4 y CU5 para Toldos y Persianas con Motor Tubular 230V

Central electrónica Beninca BRAINY24 PLUS para automatismos de 24 Vdc

Barrier V2 Nuur6 24V with built-in maneuver frame (no mast)

Axle attack engine kit Erreka Star for industrial sectional doors

Motor ataque al eje Erreka STAR para puerta seccional industrial hasta 60m²

Motor kit CAME AMICO 24V (A1824) For swing door 2 sheets up to 1.8 m

Filter by

Categories

Price

Manufacturers

Home