DEA GEKO

Motor with articulated arm DEA GEKO electromechanical 24V for smooth doors.

GEKO/X electromechanical automation manipulates the door sheet for long residential use up to 3 meters long and 250 kg weight

✓ 24V Electromechanical Motor

✓ NET24N manoeuvres (only GEKO and GEKO/2)

✓ Fixing plates

✓ Mechanical career endings

✓ Speed regulation and deceleration in opening and closing

TECHNICAL CHARACTERISTICS DEA GEKO

• Power supply voltage: 230 - 240 V ~ (50/60 Hz)
• Engine feeding voltage: 24 V
• Nominal power: 110 W
• Maximum power: 419 W
• Nominal par: 35 Nm
• Maximum torque: 260 Nm
• Work cycle: 20 cycles/hour
• 24-hour operations60
• Operating limit temperature: -20÷50 °C
• Minimum opening time to 90° (arm joint): 12 s
• Minimum opening time to 90° (sliding clamp): 8.5 s
• Nominal speed: 2,15 rpm
• Maximum speed: 2,15 rpm
• Product weight with packaging: 11.6 Kg
• Sound pressure emitted: 70 dBA
• Degree of protection: IP45

MODEL DISPONIBLES

• GEKO/X (628050): 1 24V motor with built-in NET24N manoeuvre frame.
• GEKO/X/2 (628060): 2 24V motors with built-in NET24N manoeuvre frame.
• GEKO/X/S (628070): 1 24V motor without maneuvering frame.

DISPONIBLES

• GEKO/X/BA (629265): Aluminum articulated arm.
• GEKO/X/BL (629267): Long articulated arm in galvanized steel and painted.
• GEKO/X/BLA (629268): Long articulated armband in aluminum.
• GEKO/X/BS (629266): Brazo with slider in galvanized and painted steel.

ACTION DEA GEKO

If the length of the sheet is greater than 2m or if reversible motors are used, it is necessary to install the electroclosed to ensure the blocking of the sheet in closing position. The height and characteristics of the sheet can cause the reduction of the data in the table or make it necessary to use an electrical lock also for leaves less than 2m.