KIT swinging motor Motorline LINCE for residential cancellations. What. Models of 230 Vc and 24 Vdc for running 300 mm, 400 mm, 600 mm

THE PACKAGE CONTAINS

• 1 230V or 24V throttle motor with 300mm, 400mm or 600mm stroke
• 1 Electronic control unit MC52 (230 VAC) or MC62 (24 Vdc)
• 1 Security photocell MF30 transmitter-receiver up to 25 m
• 2 controls FALK Rollingcode 433.92 MHz
• Mounting accessories

In the case of vehicles of categories N1 and N2 with a maximum mass not exceeding 2000 kg:

• The power consumption shall be calculated as follows:KIT Motor 230Vac, 300mm right side
• The power consumption shall be calculated as follows:KIT Motor 230Vac, 300mm left side
• The power consumption shall be calculated as follows:KIT Motor 230Vac, 400mm right side
• The power consumption shall be calculated as follows:KIT Motor 230Vac, 400mm left side
• The power consumption shall be calculated as follows:KIT Motor 230Vac, 600mm right side
• The power consumption shall be calculated as follows:KIT Motor 230Vac, 600mm left side

In the case of vehicles of categories N1 and N2, the maximum authorised mass shall not exceed:

• The power consumption shall be calculated as follows:KIT Motor 24Vdc, 300mm right side
• The power consumption shall be calculated as follows:KIT Motor 24Vdc, 300mm left side
• For the purposes of this Regulation, the following definitions shall apply:KIT Motor 24Vdc, 400mm right side
• The power consumption shall be calculated as follows:KIT Motor 24Vdc, 400mm left side
• The power consumption shall be calculated as follows:KIT Motor 24Vdc, 600mm right side
• The power consumption shall be calculated as follows:KIT Motor 24Vdc, 600mm left side

NotesThe following: to know if it's left or right we'll have to look at the engine from inside the door.

MANUALS

• Instruction manual Motorline LYNX
• View of parts Motorline LYNX

VIDEO INSTALLATION STEP BY STEP

01 – INSTALLATION
——————————————————————————————————————————————
You know what– Fixing of engines
05:50– Maintenance - clean pipes and lubricate bolts
06:58– Install photocells
09:52– Install a flashing lamp
11:58Install SCMV key selector
1:35– Install the MA4 antenna
What's going on– Install mechanical bolt – Stop
16:28– Connect the cables to CENTRAL MC2
——————————————————————————————————————————————
02 – Programming Main menu – Mandatory
——————————————————————————————————————————————
22:08– 1st – Remote controls – LED code
23:52– 2nd – Delay of of LED sheets T.RIT.ANTE
25:15– 3rd Engine time and softening – LED T.MOTORE
You know what– DEMO: Motor time and softening + leaf delay
28:49– 4th – Engine power and speed
——————————————————————————————————————————————
03 – Programming – Main menu – Optional
——————————————————————————————————————————————
29:47Pedestrian operation – LED code PED
31:06Pedestrian working time LED T.MOT.PED
32:45– DEMO: Engine time + idle
33:34– Automatic shutdown – LED T. Pause
35:14Automatic / step by step operation – LED AUT / PP
WhatCommand inhibition – LED INB.CMD.AP
——————————————————————————————————————————————
04 – RESTART
——————————————————————————————————————————————
39:13– Eliminate programming
40:22– Restore all factory settings

VIDEO PROGRAMMING STEP BY STEP

01 – EXTENDED MENU 1
——————————————————————————————————————————————
You know what– Activate extended menu 1
One and a halfNew remote controls LED AUT / P-P
03:31Testing of photocells – LED CODE
04:56– Engine pressure – LED code PED
06:21– Strike – Ram – LED INB.CMD.AP
07:47– Shot – Shutdown – Led T.MOTORE
09:09– Safety / locking device – LED T.MOT.PED
——————————————————————————————————————————————
02 – EXTENDED MENU 2
——————————————————————————————————————————————
12:25– Activate extended menu 2
What– Follow me LED AUT/P-P
3:15Pre flashing light/ courtesy light – LED CODE
6:07Flashing lamp during downtime – LED CODE PED
19:29– Soft start INB.CMD.AP LEAD
WhatElectronic lock in pedestrian operation – LED T.MOTORE
10:05Pressure button (PUL and PED) – LED T.MOT.PED
——————————————————————————————————————————————
03 – EXTENDED MENU 3
——————————————————————————————————————————————
25:26– Activate extended menu 3
26:54– Engine force during or deceleration
——————————————————————————————————————————————
04 – SETTLEMENT OF CLAIMS
——————————————————————————————————————————————
28:58– Component testing