Parts and accessories of motor vehicles

Tope Dock Squad D-25 in galvanized iron.

Ditec magnetic race finishes for sliding motors.

2 battery pack 12Vdc/2.2Ah for motor Motorline THAT'S GOOD.

External unlocking device Beninca "SB.BULL20.F" anti-breach with cable.

External mounting for sliding engine unlocking Beninca YOU KNOW, BULL.

The cable is 15 feet long.

Magnetic race finishes Beninca "MLS", suitable for cold areas.

Magnetic reading device Beninca "MAG.E" to detect obstacles and control deceleration.

Base or bench PPA in iron for sliding motors.

Lever unlocked with pump and keys.

Damper with regulation and magnet Medva"CIL3095" with 95mm stroke designed to dampen the closures of industrial sliding doors.

The linear damper CIL3095 – CIL30120 reduces the speed of the door during the final stretch of the tour, avoiding sudden knocks and personal injury. The speed can be adjusted according to the need of the installation. The shock absorber is automatically charged by the neodymium magnet each time the door is opened, being operational for the subsequent closing cycle.

KIT of 2 24Vac auxiliary batteries with exclusive charger (in a separate box) for direct current slide motors the DINGO range, the NAOS and ZETA tilting/sectional doors, and the NET and OMNI automatic barriers.

Card battery system CAME for electricity supply in the event of a power failure. What. Compatible with sliding motors CAME BKV.

The system allows us to automatically recharge batteries. It does not include the batteries but you can use the universal ones regardless of their maximum capacity.

Programmer or device for setting parameters in electronic control units PPA.

The scheduler is an ideal accessory for installers who normally drive automatic doors PPA, and that allow you to configure with a few simple steps multitude of options of a motor how can it be; force, speed of opening and closing, soft stop at opening and closing, starting, deceleration, programming of emitters, activation or deactivation of safety photocells, among other options.

Leverage unlock PUJOL MINI MARATHON & MARATHON DC with pump and keys.

Plastic housing Nice THE ROBUS HS250/600.

Pinon Z16 FAAC for 746 and 844 piston engines.

Support DUO attachment for two CONTROLGIR M4, maximum 14Nm.

24 V buffer battery charger for sliding motors V2 THE TORQ.

Battery buffer 24V 1,6 Ah for sliding motor V2 THE TORQ.

Battery kit with integrated charger BFT BAT-associated emission levels for emissions from combustion plants.

The quick and easy-connect battery backup kit allows the operator to work when the electrical current at 230V is lost. The 24V battery backup system can be installed in the motors BFT in the case of products of the series DEIMOS BT A, DEIMOS ULTRA, ARES BT A, ARES ULTRA.

The charger will be responsible for recharging the batteries when they lose their charging capacity.

Plastic motor housing Nice ROAD 400.

Kit of 2 12V 1.2Ah batteries for DEA LIGHTWEIGHT 24V with motor connection system and mounting plate.

Thanks to the 12V batteries we can use the LIVI/N 24V motor with battery system when we lose power.

Magnetic contact Clemsa CM1 for pedestrian doors. What. Medium power. In the case of vehicles of categories M1 and N2. Surface installation. 6 terminals. High power.

12V and 1.2A motor battery CAME of 24 V.

Battery charging kit + motor batteries Forsa Mercury 24V

The Sprint Low is intended to insert some self-charging batteries by the same electronic board, which ensures its operation in the event of a power failure.

The kit consists of 2 batteries, the stand and the charging plate.

Kit 2 12V 1,3Ah batteries and cables for motor ranges MEDVA OF WHICH:.

Moulded moulds for sliding doors

Kit batería de seguridad 2 x 1,2Ah para motor corredera Erreka Dolfin

Compatible switchgear Motorline BRAVE 500

Box for compatible power plants Motorline SLIDE/OL

Box for compatible power plants Motorline THE STARK4000

Emergency battery V2 For the purposes of this Regulation, the following definitions shall apply:

12-tooth crown, module 6, use associated with ROA81 zipper.

Run is supplied with a module 4 crown for use with standard ROA7 and ROA8 zippers.

Hydraulic retainer or rotary brake for sliding door with slope.

CONTROLGIRO is a rotary brake M4 Z16 (standard version) or M5 (PUJOL MARATHON PRO version) which has been developed for regulating and controlling door speed in slope facilities all the way.

Emergency battery with built-in battery charge for engines V2 Ayros and Alfariss.

Kit Batteries sliding motor Pujol The Mini Marathon 24V.

Replacement nylon pinion for engines TMP of the SPRINT LOW series.

End of engine stroke sensor Pujol The marathon. This is a 310mm REED detector.

The ARI02 kit of Erreka they 're hardware to power sliding doors that are telescopic, and we supply it with a 3-metre guide and chain drive system.

This transmission kit is recommended for use on sliding engines with mechanical running ends.

Magnetic race finish pair Pujol This is Marathon Pro Q II M5. Plastic shell.