List of products by brand V2

In the case of vehicles of categories M1 and N2 for a single leaf and for running ones.

Digital control panel 230V with encoder V2 CITY1-EVO for one- or two-leaf clover and slippers.

Table of manoeuvres V2 CITY9 an analogue 230 V for sliding doors.

" TABLE CITY9 HAS BEEN REPLACED BY NEW FLEXY2 MODEL FULLY COMPATIBLE "

Digital manoeuvring chart V2 CITY2+ 230 V for sliding doors and doors equipped with two 24 V direct current motors.

Analogue maneuvering chart V2 CITY11 230 V for swing lamps (one and two sheets).

Table of manoeuvres V2 EASY-TOP digital 230 V for rolling shutters.

Table of manoeuvres V2 EASY-LUX for rolling shutters with courtesy led light and buttons.

Table of manoeuvres V2 EASY-BASIC an analogue 230V with built-in receiver for roller shutters.

Table of manoeuvres V2 EASY1 230V analogue for blinds, blinds and awnings with built-in receiver 433.92 MHz.

Table of manoeuvres V2 EASY2 230V analogue for roller blinds with courtesy light and automatic closure.

Table of manoeuvres V2 "FLEXY' analogue 230V for sliding and swinging doors.

Replacement of sectional motor chain tensor V2 THE JEDI.

Replacement plate V2 PD13 for ALFARISS sliding engines, with programming display.

Electronic plate "PD14" for use as spare parts in sliding motors V2 OTHER IT 'S 24V .

The PD14 is equipped with a display that allows, in addition to easy programming, the constant visualization of the status of the entries; in addition, the structure with menus allows a simple programming of working times and operating logic.

Tube motor V2 LEX Final Race Mechanical for household blinds with a diameter of Ø45 designed to power blinds and roller blinds with tubing from 52 mm to 70 mm.

The operator is powered at 230Vac and has a diameter of 45mm. It has a mechanical manual end run with progressive screw regulation.

Other, of circular cross-section V2 AGON for revolving doors with axle 60 and up to 280 kg with electro-brake. What. Motor for spring-loaded industrial revolving doors, axle 60 mm in diameter, lifting capacity up to 280 kg and crown 200/220.

Emergency battery with built-in battery charge for Barrier V2 NOUR.

Barrier of passage V2 24V NUUR with fast opening for residential and public accesses up to 4 or 6 metres long.

Fixed support Barrier of passage V2 NOUR.

Electromechanical and automatic barrier V2 Quickly opening NIUBA in a 230V (non-intensive) or 24V (intensive) version for residential and collective access with a 12-foot pole.

Additional accessories to the electromechanical barrier V2 I'M GOING IN.

Electromechanical and automatic barrier V2 Quickly opening NIUBA in a 230V (non-intensive) or 24V (intensive) version for residential and collective access with a 20-foot pole.

Inverter board V2 I'M NOT SURE.

End-of-race supports or blades V2 ALFARISS, PLEASE.

Head Electric motor V2 AZIMUTH irreversible for sectional and tilting doors up to 8 m2.Starting force 500 N 50 kilos .

Engine V2 Electromechanical JEDI 24 V irreversible for sectional and tilting doors up to 15 m2 with a starting force of 1000 N (100 kg).

" THE JEDI MODEL HAS BEEN DISCONTINUED AND REPLACED BY THE MODEL ATRIS "

KIT engine V2 Electromechanical JEDI 24 V irreversible for sectional and tilting doors up to 15 m2 with a starting force of 1000 N (100 kg).

" THE JEDI MODEL HAS BEEN DISCONTINUED AND REPLACED BY THE MODEL KIT ATRIS "

Electromechanical gear motor V2 For the purposes of this Regulation, the following definitions shall apply: for sliding doors up to 1,800 kg / 2,200 kg and 2,500 kg weight.

Electric motor kit V2 OTHER for use in the manufacture of motor vehicles residential buildings up to 9 m2.

Hydraulic motor V2 URSUS 230V for heavy duty swing doors, sheets up to 4 or 6 meters long designed to power canopies of community garages.

Electromechanical engine V2 STARK6 irreversible in 230V and 24V format for swing doors with blades up to 6m. Designed to power residential or small semi-intensive community doors.

Electric motor kit V2 STARK6 irreversible in 230V and 24V format for swing doors with blades up to 6m. Designed to power residential or small semi-intensive community doors.

KIT Electromechanical engine V2 "ATRIS 1000' Irreversible 24 V for sectional and tilting doors of up to 15m2, with a starting force of 1000 N (100 kg).

Electromechanical engine V2 New Zealand 24V for residential canopies up to 2 m per sheet, equipped with a mechanical opening cap.

Kit Electromechanical engines V2 24V NYK for residential lights up to 2 m per sheet, equipped with a mechanical opening cap.

Electromechanical actuator V2 STARK3 irreversible 230V or 24V format for sliding doors with blades up to 3 m ideal length for powering residential doors. Equipped with mechanical opening cap.

Electromechanical actuator V2 STARK3 irreversible 230V or 24V format for sliding doors with blades up to 3 m ideal length for powering residential doors. Equipped with mechanical opening cap.

KIT available in electromechanical 230V with CITY4-EVO and electromechanical 24V with CITY2+.

KIT Electromechanical engine V2 "ATRIS 700' Irreversible 24 V other, of circular cross-section, of iron or steel, with a starting force of 700 N (70 kg).

Electromechanical actuators V2 STARK3 irreversible 230V or 24V format for sliding doors with blades up to 3 m ideal length for powering residential doors. Equipped with mechanical opening cap.

KIT available in electromechanical 230V with CITY4-EVO and electromechanical 24V with CITY2+.

Machinery for making pulp of fibrous cellulosic material V2 ZORUS 24V electromechanical for residential switchgear, designed to power canopies with wide pillars.

Two models are available:

• ZORUS2 for leaves up to 2,8 m per leaf.

• ZORUS4 for leaves up to 4.2 m per leaf.

Couple Finals race by sliding motor magnets V2 GOLD AND ALFARISS.

Table of manoeuvres V2 PD20 for sliding motors FORTECO / AYROS with inverter technology.

Other, of circular cross-section V2 THE JEDI.

Unlocking knob V2 GOLD.

It doesn't include a water bottle or keys.

Pump and key unlock V2 GOLD 171301-MCR002

DOES NOT INCLUDE THE HANDLE

Outer receiver V2 model WALLY of 1, 2 or 4 channels at 433,92 MHz or 868 MHz.

KIT Electromechanical engine V2 AZIMUTH irreversible for sectional and tilting doors up to 8 m2.Starting force 500 N 50 kilos .

Emergency battery V2 For the purposes of this Regulation, the following definitions shall apply: