List of products by brand Nice

Replacement electronic plate Nice OTHER for the engine THEFT 300.

Accessory Nice BMA1 for openings up to 360° in engines buried for leaves with a long maximum of 3.5 m.

Transmitter Nice ERA P6 for independently operating up to 6 blinds or awnings. What. RollingCode type radio frequency 433 MHz with a range of up to 200 metres outdoors and 35 metres indoors. Powered by two standard batteries for 2 years approx.

Action 49x150x14mm . With wall support included.

The NICE ERA P6 transmitter is compatible with the entire engine range Nice.

Central command Nice Moonclever MC424L for 24 Vdc sliding door motors, without encoder, with integrated receiveror and ready for Opera and Solemyo system.

Motor gearbox Nice SP6000 SPA03R04

Engine Nice TEN electromechanical 24Vdc for overflowing and non-overflowing tilt doors

Motor reducer for doors up to 9m2 and 2,6m high (up to 16 m2 and 2,6m high with the use of 2 motors).

Three versions, standard and powered:

• with integrated central, force regulator and absolute binding (TN2010L);

• with built-in central and receiver and electromechanical career end (TN2030L);

• without central (TN2020L).

Pair of transmission shafts 20x20 mm, length 200 mm for tilting motor Nice TRY.

Pair of standard telescopic straight arms for tilting motor Nice TRY.

Transmission device for a couple of motor shafts Nice TRY.

Engine Nice 24Vdc electromechanical soon with absolute encoder for sectional doors up to 20m2 of axis attack.

For balanced sectional doors up to 5 meters high, with anticated system (safety device in case of breakage of the springs).

NICE Era One LR bidirectional long range 433 MHz with 4 buttons: 3 radio channels and 1 button to request automatic status.

NICE transmitters were One BD bidirectional of a kind used in motor vehicles: 3 radio channels and 1 button to request automatic status.

Radio frequency 433,92 MHz with rollingcode encoding, enabling code management, self-learning with 192 Bit encoding, also compatible with encoded receivers Nice O-code floor. The two-way Era One remote is compatible with previous versions of plug-in and external receivers Nice, operating in one-way mode.

Other, of circular cross-section Nice OXI BD 433,92 MHz bidirectional,with Opera system functions.

OXIBD plug-in receiver kit with two-way 433 MHz Era One BD transmitters.

KIT engines Nice WINGO 24V electromechanical for two-bladed swing doors up to 2 m per sheet (model 4024) and up to 3,5 m per sheet (model 5024).

Engine Nice WINGO WG2024 24V electromechanical for swing doors up to 2 meters per leaf.

Engine Nice WINGO WG2024 24V electromechanical for swing doors up to 2 meters per leaf.

Replacement plant for Nice TN2030L and TNLKCE.

Electronic plate Nice RBA2/A (SPRBA2) for ROBUS 350 sliding engine.

Unlocking kit Nice KI1 from the outside with metal rope and key chain.

Electromechanical motor NICE model TOONA 4 external mounting for residential swing doors with blades up to 3 metres. Also available in 24Vdc version, with magnetic encoder.

Sliding engine Nice ROBUS RBS600HS high speed irreversible, 24 Vdc, magnetic race end, control unit with integrated radio receiver, optional backup battery (PS124).

Ideal for intensive use: the opening of a 4 m cancellation takes less than 10* seconds.

Efficient and safe: functional mechanical design and high performance materials. Reduction of 90% in stand-by consumption.

Easy-to-play and safe unlock lever; magnetic end, simple installation and which allows to reduce the length of the zipper.

Engine corridor Nice ROBUS RBS400 (up to 400KG) and ROBUS RBS600 (up to 600KG) irreversible, 24 Vdc, magnetic race end, control unit with integrated radio receiver, optional backup battery (PS124).

Efficient and safe: functional mechanical design and high performance materials.

Easy-to-play and safe unlock lever; magnetic end, simple installation and which allows to reduce the length of the zipper.

Easy to program,thanks to the MyNice Pro app, connecting to the control unit the Pro-View or the BiDi-WiFi.

Module for the operation of 1 automatic open-stop-close in single or multi-group mode.

1 channel module for the operation of 1 automatic with step-by-step function (Open-Stop-Closure).

Module for the operation of 2 open-stop-close automatic systems in single or multi-group mode.

Radio and central receiver NICE TT2N in miniature for the for use in the manufacture of motor vehicles.

Grade of protection IP20.

Simple and fast programming: using the dedicated key.

The presence of a signalling LED helps to follow the correct programming procedure by indicating, for example, exceeding the thresholds programmed in the climate sensor.

Transmitter Nice ERA P1 to operate one or a group of blinds or awnings. What. RollingCode type radio frequency 433 MHz with a range of up to 200 metres outdoors and 35 metres indoors. Powered by two standard batteries for 2 years approx.

Action 49x150x14mm . With wall support included.

The NICE ERA P6 transmitter is compatible with the entire engine range Nice.

Module for the operation of 1 automatic open-stop-close in single or multi-group mode.

Other, of circular cross-section Nice IN ORDER TO ENSURE THE CORRECT APPLICATION OF THIS REGULATION, MEMBER STATES SHALL TAKE INTO ACCOUNT THE FOLLOWING:.

Table of manoeuvres Nice OGA2N at 24V for SHEL50KCE, SHEL60KCE and SHEL75KCE sectional motor. What. The plate has a built-in receiver at a frequency of 433.92 MHz and functions of automatic shutdown, motion regulation and reversal of motion in case of obstacles during travel.

Table of manoeuvres Nice OGA0 to 24V for SHEL50KCE, SHEL60KCE and SHEL75KCE sectional motor. What. The plate has a built-in receiver at a frequency of 433.92 MHz and functions of automatic shutdown, motion regulation and reversal of motion in case of obstacles during travel.

Central or maneuvering frame Nice SOON reference SPSOA2R10 compatible with the former central Nice SOA2.

Unlocking Nice WINGO thumping engines.

Replacement Nice MBA01R03 is a 24V electric motor specially designed for spare parts for systems hyppo series drum doors automation Nice, a manufacturer known for its residential and commercial automation solutions. This engine, which has a encoder magnet, it is able to provide a power of 50W and uses a rolling screw to ensure smooth and efficient operation, regulating the speed and allowing precise and controlled movements of the motorized system.

Engine set and change box WIDE L R10 WIDE L (Nice SPAMG247B00)

Electronic plate Nice SPRBA4R10 for sliding engine ROAD400 (current model). It incorporates a 433 MHz receiver.

Compatibility: This control panel is suitable for those engines Nice ROAD400 manufactured from March 2018.

Table of manoeuvres Nice SP081-B control center electronic card A824.

Control, programming and diagnostics unit for equipment with the BUS T4 connection, in situ or remotely via GPRS through the connection with your PDA, Smartphone or PC.

Strap on Nice SPIN (6 meters of 10mm).

Central Nice WLA1 for WALKY articulated motor WL1024C.

Guidance for the extension of 0.8m + motor belt Nice SPIDO 600, PLEASE.

Manufacture from materials of any heading Nice TOO3000 and TOO4500 230 V electromechanical switchgearblades up to 3 m and 300 kg (TOO3000 model) and up to 4,5 m and 250 kg (TOO4500 model).

KIT Sliding engine Nice ROAD 400 24V ideal for residential sliding doors manoeuvre chart SPRBA4R10 with built-in receptor and the race finals are mechanical. It has a smooth stopping when opening and closing the door.

Content of the KITThe following: ROAD 400 sliding motor, FLOR2RE emitters, EPM photocell, and four feet of nylon zipper.

Plastic motor housing Nice ROAD 400.

Plain lock Nice PPD1630.

ROX is an electromechanical gearbox motor for the automation of sliding doors up to 600 kg for residential use: has an electronic control unit incorporating a 433,92 MHz radio receiver with coding FLO, FLOR, OPERA, HCS SMILO.

ATTENTION: THE NICE ROX600 ENGINE HAS BEEN DISCONTINUED FOR THE BETTER PERFORMANCE ROBO600 MODEL. WE HAVE THE ROBBERY KIT IS 600.