List of products by brand Nice

Flashing light Nice integrated into the barrier caps.

Power cable Nice Solemyo to connect at Moonclever power plants through a 5-pin connector and with a two-wire output (positive and negative).

NICE THOR motor for automating sliding doors up to 1500 kg for industrial or residential use. What. With the THOR-1500 engine you can easily and quickly automate very heavy doors or locks.

Garage crew Nice SMILO 4 channels RollingCode is 433.92 MHz.

This emitter is supplied with a standard code which can be memorised on the receiver by radio or manually according to the corresponding instructions.

Garage crew Nice SMILO two channels RollingCode 433.92 MHz.

This emitter is supplied with a standard code which can be memorised on the receiver by radio or manually according to the corresponding instructions.

Lever unlocking sliding engines Nice ROBUS, ROAD and ROX.

Issuer Nice It was One model "ON9E" 9-channel at 433.92 MHz with RollingCode encoding.

Replacement plate Nice RBA/A for sliding motor ROAD400 with built-in receiver compatible with FLO and SMILO emitters.

Table of manoeuvres Nice SPNKA3R10 for NAKED engines after 2018.

Wi-Fi controller for the smartphone operation of automatic systems of the mark Nice. What. It includes domestic blinds, section motors, sliding motors or lights.

Engine Nice SHEL75 of 750N at 24Vdc for doors other, of circular cross-section and doors other, of circular cross-section (of 1 sheet), with pre-assembled guide in one piece of 2,850 mm. What. Includes receiver (built-in) and 2 NICE FLO4RCE controls.

Metal wrapping for photocell Nice FT210.

NICE SPWA20 electronic plate for barriers WIL4 and WIL6

Electronic plate Nice SNA1 for SPIN10, SPIN11 and SN6011 engines.

Automation of capacity control is one of the preventive measures that have been put in place to curb the spread of the Covid-19 epidemic.

ControlTradeGate® allows management and control of any glass door, automation or access system, being an integral system and adapted to the various new or existing installations.

It 's the only device on the market that 's "plug and play"I'm not going anywhere. In a very short time, and without the need for special knowledge, anyone will be able to perform an installation of this device, which will be used to manage, accesses, capacity and doors ...

Unlock safe with NICE KIO key selector with wire pull mechanism, ideal for the unlocking of the electric brake in roll-over motors in the event of a power failure in order to operate the blind manually.

It's called NICE SPIN30 SNA3/A, ideal for engine replacement OTHER and OTHER.

Pair of photocells Nice It was PHOTOCELL S with transmitter-receiver operation.

The models EPSB and EPSAB have the BlueBus technology compatible with some Nice which allow the photocell to be connected with only two wires where they will receive power and the safety contact.

Pair of safety photocells Nice EPM for indoor or outdoor use, with a maximum range of 15 meters. The power supply of the EPM photocell is 24V and incorporates IP44 protection.

Non-reversible electromechanical motor Nice TUB 400Vac for sliding doors industrial use up to 4000 kg.

KIT Roof motor Nice SPY 550N 24V for automating sectional doors up to 9m2 and tilting doors (overflowing and non-overflowing) of a thickness not exceeding 10 mm. What. The SPY engine is ideal for residential use doors.

Engine Nice WINGO HS electromechanical for rapid actuation sliding doors with blades up to 3 metres or 200 kg. Ideal for automating residential folding doors.

Motor for rapid actuation (HS technology) for swing doors with blades up to 3 m or 270 kg. Electromechanical gearbox with articulated arm, external mounting, 24 Vdc, with magnetic encoder. Ideal for residential applications also in the presence of large columns. Ideal for heavy use and fast manoeuvres: opening to 90o in approximately 10 seconds.

KIT Motor NICE model SPINKIT 650N for sectional doors up to 8,8m2 and tilting doors up to 9,8m2. What. Leash traction.

The version in KIT comes with pre-assembled guide of 3m SPIN11KCE.

THE NICE SPIN ENGINE HAS BEEN REPLACED BY THE NEW MODEL NICE SPIDO600 WITH IMPROVEMENTS OVER THIS MODEL

Electromechanical engine Nice Toona HS, 24Vdc with magnetic encoder for rapid actuation of swing doors with blades up to 5 metres or 400 kg (TO5024HS) and up to 6 metres or 1,450 kg (TO6024HS). The installation of this motor is ideal for residential or community doors of intensive use.

Electromechanical gearbox engine 24 Vdc Nice TITAN HS with magnetic encoder for use in the manufacture of motor vehicles up to 3,7 m (TTN3724HS, TTN3724RHS), and for sheets of up to 6 m (TTN6024HRS, TTN6024HRS) AND.

Electromechanical motor of 24 V Nice TOONA7 of a kind used in motor vehicles intensive use up to 7 metres of leaf.

Externally mounted electromechanical gearbox, powered at 24 Vdc, with magnetic encoder.

Receiver kit Nice long range OXILR with two-way emitters and a universal adapter for frames from other manufacturers.

Lever axle unlocked Nice THE FOLLOWING POINT IS ADDED:

Leverage release Nice RUN

Pre-wired aerial receiver Nice 2 channel transmitter compatible Nice it shall be capable of operating at a frequency of 433,92 MHz (FLO, SMILO and ERA INTI).

Plastic housing for sliding motors Nice THOR IS 1500.

A length of not more than 50 mm with a metal insert for canisters with a maximum weight of 500 kg.

Opla wall mount for NiceWay buttons.

Discreet, elegant and functional: Very thin - as much as the single plate - the transmitters, located on the Opla wall plate, allow you to add control points in a discreet and elegant way without masonry work.

NiceWay's Opla wall plates are available in square Opla-S and rectangular Opla-R versions, and in numerous color variants.

Engine Nice In the case of vehicles of categories M1 and N2 for residential sliding doors with electromechanical race versions (RB6010 and RB1000) and for inductive running purposes (RB600P and RB1000P).

Electromechanical barrier Nice S-BAR 24V with 4-metre mast for vehicle access control. What. The equipment is provided for the optional pre-installation of protective rubber and signal lights.

Plastic housing Nice THE ROBUS HS250/600.

High speed NICE ROBUS HS sliding motor for fast drive other, of circular cross-section up to 250 kg (RB250HS) and 500 kg (RB500HS), for doors for residential or industrial use.

Engine Nice Electromechanical SUMO 24Vdc for sectional doors and sliding doors of up to 35m2.

A voltage of not more than 300 V, of a kind used in motor vehicles. What. Ideal for heavy use.

For the purposes of this Regulation, the following definitions shall apply:

Issuer Nice It was Flor's 4-channel "FLO4RCE" model at 433.92 MHz with multiple insertion sequential coding.

Issuer Nice It was One model "ON2CE" 2-channel at 433.92 MHz with multiple insertion sequential coding.

Issuer Nice It was a 2-channel Inti at 433.92 MHz available in various colors (Pack of 10 units).

Spare set end of race Nice SPIDER AND SPIDER.

End of the race Nice Thor and Rob.

Electronic board 12/24V that allows us converting a plug-in receiver into a wired output for use in most frames with alternating button output.

12-tooth crown, module 6, use associated with ROA81 zipper.

Run is supplied with a module 4 crown for use with standard ROA7 and ROA8 zippers.

Plastic housing for sliding motors Nice Robus is 600/1000.