KIT engine EMFA MTCH of 800 N and 1000 N for residential-intensive sectional doors.

Engine Forsa Electromechanical ERG 24V for revolving doors of a thickness of residential use up to 10m2. What. With encoder and end-of-course micro-switches on opening and closing. Unlocking by lever, maneuver board, anti-crush system, courtesy light and unlocking in case of power failure.

Hydraulic motor Medva HB1 for swing doors one or two-bladed counterweights with a not more than 25 m2, for residential, community or industrial use.

KIT swinging motor Motorline LINCE for residential cancellations. What. Models of 230 Vc and 24 Vdc for running 300 mm, 400 mm, 600 mm

• Automation for bellow or dissected gates Motorline KFM, effective and robust intensive use with built-in central.

Operator Forsa Reversible electromechanical COUGAR in oil bath for intensive use on doors up to 5 metres and/or 400 kg.

Irreversible 24Vdc motor with integrated control centre and absolute encoder, installed internally in a column of small dimensions, properly drilled.

The first engine Nice slippery for sliding doors up to 400 kg and a blade length of up to 6 m.

Driving FAAC D600 electromechanical 24 V by drawing for doors other, of circular cross-section and spring swings and counterweights for residential use.

Engine Pujol SYROS at 230 V for residential sliding doors up to 600 or 800 kg.

New series of sliding motors Pujol with fixed anchorage system and built-in receiver box, which adapts easily to cancellation with m4 zipper and allows you to easily adjust the motor force.

KIT Motor Came BK-1200 from 230V for sliding doors of up to 1200 kg and a length not exceeding 20 metres. What. It incorporates electronic card with programming display, built-in radio decoding and mechanical race endings.

KIT engine Pujol Marathon PRO Q II single phase for sliding doors up to 1000 kg residential, community or industrial. Equipped with electronic board and built-in receiver.

Motor kit CAME A5000A electromechanical 230V for one-bladed swinging blades up to 5 m, with a maximum weight of 400 kg.

Electromechanical engine Forsa SURF 300 for swing doors with sheets up to 3,5 metres and 300 kg of weight.

Sliding engine oil bath traffic for sliding doors of industrial use and maximum weight other. 

Electromechanical engine Forsa BAT 400 at 230 V for use with hinged doors residential up to 2,5 metres or 250 kg.

Hydraulic motor HYDOM MINIMAX for heavy use thanks to its heat-cooled aluminium tank, for oversized two-bladed swing doors (maximum 14m2). Allows manual opening and closing in the event of a power failure.

Maintenance on this engine is practically zero.

Electromechanical motor PUJOL ARCO PRO, Irreversible 230 V or 24 V for residential use for sheets up to 2,5 metres (ARCO25) or sheets up to 3,5 metres (ARCO40).

The PUJOL ARCO PRO electromechanical actuator is a motor with manual locking and unlocking ideal for powering residential lightweight swing doors. What. The gear motor keeps the lock open and closed without the need for electric locks. The actuator has no mechanical friction.

Kits Linear hydraulic motor Erreka VULCAN intensive use for swing doors residential, community and industrial with a maximum leaf length of 4 or 6 metres depending on the chosen stem.

Range of 24 V operators for heavy duty sliding doors with blades up to 1500 kg. What. Magnetic race terminals and command centers compatible with the U-link communication protocol.

Kits Linear hydraulic motors Erreka VULCAN intensive use for double swing doors residential, community and industrial with a maximum leaf length of 4 or 6 metres depending on the chosen stem.

Hydraulic motor for tilting doors one or two-bladed counterweights with a not more than 14 m2, for residential, community or industrial use.

Motor gearbox Aprimatic Wave 600 to 230V, use in individual residences up to 600 Kg. What. Built on a sturdy aluminum monoblock injected and oven lacquered with special outdoor epoxy resin. It has a precise encoder which provides maximum control over the speed, force and position of the door. Incorporates maneuver chart easy start-up with self-learning of the basic working parameters. Transmission consisting of endless steel screws and bronze crown obtaining a door movement soft, quiet and very reliable.

Motor gearbox Aprimatic Wave 400 to 230 V, use in individual residences up to 400 kg. What. Built on a sturdy aluminum monoblock injected and oven lacquered with special outdoor epoxy resin. It has a precise encoder that facilitates maximum control over the speed, strength and position of the door. Incorporates maneuver chart easy start-up with self-learning of the basic working parameters. Transmission consisting of endless steel screws and bronze crown obtaining a door movement soft, quiet and very reliable.

Operator Aprimatic Electromechanical MATICBOX at 24 Vcc for residential use in spring doors and sectional doors, chain and belt drive. What. Equipped with an automatic path recognition system, deceleration in opening and closing phases and anti-crush sensitivity.

I'm going to go with the P-1. Designed for roll-over doors up to 530 kg weight. What. Suitable for automating locks with side drive and gearbox.

Integrated electronic equipment that allows opening by key, button or remote control. Manual operation by crank.

" This product has been discontinued in 2024 and PUJOL has stopped manufacturing "

Motor kit CAME BXL04AGS at 24V for sliding doors up to 400 kg and length of 10m designed for residential use canals.

Electromechanical motor of 24 V dc MEDVA PL1000 for sliding doors of residential use up to 1000 kg with built-in receiver box and 2 RollingCode controls.

" THE PRODUCT HAS BEEN DISCONTINUED BY THE MANUFACTURER . WE RECOMMEND YOU CHECK OTHER ENGINES IN OUR SLIDING ENGINE CATEGORY "

Electromechanical motor of 24 V dc MEDVA PL500 for sliding doors of residential use up to 500 kg with built-in receiver box and 2 RollingCode controls.

Machinery for making pulp of fibrous cellulosic material Motorline TELICA 24V for hinged doors with reduced space for leaves up to 2.5 metres.

Machinery for making pulp of fibrous cellulosic material Motorline TELICA 230V for hinged doors with reduced space for leaves up to 2.5 metres.

Kit Electromechanical motor Medva PW230K 24V for residential use swing doors for sheets up to 3,5 meters.

The PW230K engine is designed to power residential swing doors that we can give semi-intensive use.

Kit Electromechanical motors Medva PW230K 24V for swing doors for residential use for sheets up to 3,5 meters.

The PW230K engine is designed to power residential swing doors that we can give semi-intensive use.

Mechanical power supply for residential use swing doors leaves up to 3,5 metres.

Kit Electromechanical motors Medva PW200 24V for swing doors for residential use up to 2.5 meters per sheet.

Mechanical power supply for residential sliding doors up to 2.5 metres.

Hydraulic operator Aprimatic TWENTY 270 for swinging canes one or two leaves, semi-intensive use. Speed deceleration closing. Built-in anti-crush safety valves. Quick emergency release. Useful length of stem 270 mm. Stem diameter is 16 mm.

Hydraulic operator Aprimatic TWENTY 270 for swinging canes one or two leaves, semi-intensive use. Speed deceleration closing. Built-in anti-crush safety valves. Quick emergency release. Useful length of stem 270 mm. Stem diameter is 16 mm.

Hydraulic operator Aprimatic TWENTY 270 for swinging canes one or two leaves, semi-intensive use. Speed deceleration closing. Built-in anti-crush safety valves. Quick emergency release. Useful length of stem 270 mm. Stem diameter is 16 mm.

KIT Hydraulic operators Aprimatic FORTY 4 for swing bars of two leaves for residential use.

Built-in anti-crush safety valves. Quick emergency release. Useful length of stem 270 mm. Stem diameter is 18 mm.

KIT Hydraulic operator Aprimatic FORTY 4 for swing bars of a leaf for residential use.

Built-in anti-crush safety valves. Quick emergency release. Useful length of stem 270 mm. Stem diameter is 18 mm.

Hydraulic operator Aprimatic FORTY 4 for swing bars one or two leaves, residential use.

Built-in anti-crush safety valves. Quick emergency release. Useful length of stem 270 mm. Stem diameter is 18 mm.

Electromechanical engine BFT BOTTICELLI SMART BT A for intensive or very intensive use, designed to automate sectional garage doors.

It has a very compact design, suitable for installation anywhere, thanks to the wide range of chain rails available in various lengths.

The control centre and the end of run with encoder and mechanical cap are incorporated, respectively, on the operator and the guide.

With the Lineal Low engine, it's no longer a problem to power a community door. With our reader system angle the automatism recognizes the position and function to be performed.

The Lineal Low incorporates an angle reader (encoding) which allows us to have no quotas in the case of vehicles with a maximum design speed exceeding 50 km/h, the maximum design speed shall not exceed 50 km/h.

24 V motor DEA model TEO 700 of 1000N, designed to drive other, of circular cross-section. What. It is the manufacturer's cheap and easy to install solution DEA.

Engine FAAC model C721 with 24V operation for light residential and communal sliding doors of up to 800 kg.

Electromechanical gearbox engine 24 Vdc Nice TITAN HS with magnetic encoder for use in the manufacture of motor vehicles up to 3,7 m (TTN3724HS, TTN3724RHS), and for sheets of up to 6 m (TTN6024HRS, TTN6024HRS) AND.

Engine Clemsa AA40 electromechanical 230V for one-bladed swing doors for a maximum length of 4m per leaf. What. The AA40 model is ideal for automating residential doors for non-intensive use.

Engine Clemsa AA30 electromechanical 230V for one-bladed swing doors for a maximum length of 3m by sheet. What. The AA30 model is ideal for automating residential doors for non-intensive use.