Power cable Nice Solemyo to connect at Moonclever power plants through a 5-pin connector and with a two-wire output (positive and negative).

Outer receiver KINGGATES FREDDY2 at 433.92 MHz to cable it to 12/24V.

Compatible with remote controls KINGGATES STYLO4K.

Medva ROLLER manoeuvre chart for 230V rolling shutters with a built-in 868 MHz receiver.

USB WiFi device for sectionally mounted Medva VULCANO.

Sliding end motor stroke sensor FAAC 740 and 741.

Locker unlocked Aprimatic Armored outer chrome insertion with button.

• fittings for prestige installations

• interchangeable cylinder manufactured in Italy

• standard electrical connection with three-way buttonhole

• double unlocking of the brake from inside/outside with a single brake cable

Cable-based signal anemometer V2 MISTRAL for automatic tubular blinds or awnings.

Replacement Baseboard and Display Motorline RED EVO.

KIT Mechanical race finish with limit switch encoder for the SEA and FORSA SATURN/BOXER/MERCURY models.

Unlock pump and keys Nice The Titan HS.

Manufacture from materials of any heading Nice TOO3000 and TOO4500 230 V electromechanical switchgearblades up to 3 m and 300 kg (TOO3000 model) and up to 4,5 m and 250 kg (TOO4500 model).

Pineapple Beninca DU45E, AU45/L, and AU96/L.

Engine Nice SPIDER 1200BL WiFi integrated for sectional doors up to 17m2 or for a sheet of up to 19.5m2.

Equipped with integrated central and bidirectional receiver. System Wi-Fi integrated able to control automatism through the MyNice application, compatible with Android and iPhone.

SPIDER can also be integrated into the dometic ecosystem Yubii for use with devices Nice or third parties. The control will be done with the Yubii application along with other devices that have integrated into the ecosystem.

Electromechanical engine CAME ATI 5000A irreversible 230Vac for cancellations up to 5 meters per leaf, with end-of-run micro-interruptors in opening and closing.

Strap on Nice SPIN (6 meters of 10mm).

Read end run magnetic motor slide V2 ALFARIS (1 piece).

Electromechanical engine BFT 24V 'PHOBOS BT A25' for swing doors up to 400 kg and 2,5 m or 'PHOBOS BT A40' up to 500 kg and 4 m.

Complete range of electro-mechanical pistons for residential use, suitable for swinging canopies up to 4 metres wide and weighing up to 500 kg.

Recognition of obstacles: the D-Track torque management and control system ensures maximum safety for persons and property and facilitates system certification.

SUB D40X25 P994.

Trailer and connecting motor chain sectional V2 ATRIS.

Pinion Group C720 C721 FAAC 63003502

Hydraulic oil radial gasket in 2 liters for manufacturer's whirlwind engines EMFA MAP.

12/24v MICRO Receiver with capacity for 400 codes or 1,000 codes.

The configuration and management of this receiver is done with the PC-Copy Duplicator.

ROGER H30/643 sliding motor for residential doors up to 600KG with H70 series built-in maneuvers, optical and mechanical race finishes.

Three-colored LED lights Red/Verde/Amber Motorline for automatic door control thanks to the MCS01 compatible power station.

Receptor CAME RKLT-W50 for mechanical tubular motors up to 50 Nm and 500 W.

Unlock Motorline BRAVO lock bulb with 2 keys.

Bulb and two keys for unlocking the ROGER sliding engines.

Racer magnetic race runner Sommer (1 unit).

Emergency Unlock Key MEDVA ECO/HLR BAC

Universal bi-channel receiver model RX UNICOM with frequencies 433,92 MHz and 868 MHz, AM/FM bands. With encryption by Switch with 8-bit dip switch.

Aluminum and iron door hardware set for the MAGIC power supply Erreka.

" The manufacturer Erreka has decatalogued this product "

Engine Erreka LINCE at 24Vdc for residential sliding doors up to 650 kg with electronic obstacle detection and end of race (encoder).

KIT Electromechanical engine Clemsa "AA 300 B" 230Vac irreversible with lock, for residential sliding doors up to 3 metres in length per sheet.

The actuator has a lock so it does not require the use of electric locks, however, it may be installed as a recommendation. The actuator stroke is 300 mm and the stem output speed is 1,6 cm/sec. Manufacture is made of stainless steel, and the unlock is protected with a lock giving it greater security and reliability.

Electromechanical actuator with 230Vac and 24Vdc articulated arm for swinging doors up to 2 meters per blade, ideal for doors with wide pillars.

Other, of circular cross-section Clemsa "AR2581F' with electro-brake for roller shutters up to 170 kg. What. Designed to power center-axle winding closures of commercial premises.

The manoeuvre chart of this KIT is model CLAS 1 with receiver card RNE248 at 433 MHz.

Allmatic electric motor of the type XTILUS 230 Vfor hinged doors up to 3,5 metres (maximum 400 kg), for residential or community use. Attachment support included. Traditional unlock key.

Other, of circular cross-section Clemsa Mastercode "RMV 2" 433 MHz with two channels.

The receiving card 'RMV 2" connects directly to manoeuvring frames Clemsa have at their disposal connection 4 pins which allows us to connect directly to the circuit board without the need for wiring.

Analogue manoeuvring table for 1 or 2 sheet swing doors with built-in receiver. What. Includes electronic deceleration at end of run. Motor thrust force control by torque limitation.

Garage crew Sommer 4050V 2-channel with a quartz frequency of 40.685 MHz and programming by combination of dip-swtiches is therefore configured by placing the corresponding combination of digits.

Electromechanical engine EMFA BAT 2 in 230V and 24V version for residential swing doors of up to 3 metres per leaf.

Engine Clemsa AA40 electromechanical 230V for one-bladed swing doors for a maximum length of 4m per leaf. What. The AA40 model is ideal for automating residential doors for non-intensive use.

Motor kit CAME BXL04AGS at 24V for sliding doors up to 400 kg and length of 10m designed for residential use canals.

Magnetic key reader and encoder LK-10 + 200 Keys.

It allows the encoding of magnetic keys of 6 magnets basic codes, encodes key with central guide, left and right.

Electromechanical engine Forsa SURF 300 for swing doors with sheets up to 3,5 metres and 300 kg of weight.

KIT Motor Came BK-1200 from 230V for sliding doors of up to 1200 kg and a length not exceeding 20 metres. What. It incorporates electronic card with programming display, built-in radio decoding and mechanical race endings.

Facility manager via PC and SW 7 software (including) MUTANcode and MUTAN II systems. This is database management. Issuers N, NT and T.

" THE PT7 MODEL HAS BEEN REPLACED BY THE PT8 MODEL WITH NEW FEATURES "