Keyboard Erreka with a thickness of not more than 10 mm for access to housing or commercial premises. With output of 2 NA/NC relays and up to 250 codes.

KIT Sliding engine Clemsa "AC562N" electromechanical 230 V for residential doors up to 500 kg. It incorporates a manoeuvre chart CLAS62C. The actuator has magnetic running ends, levered unlock system, aluminum body painted with polyester powders and ABS crankcase. in addition, thanks to its anti-crush system and smooth stopping we will have an engine with reliability and maximum precision.

KIT engine Motorline SLIDE800A at 230V with oil and grease lubricated reducer for sliding doors up to 800kg semi-intensive use and IP44 protection.

The electromechanical actuator Erreka ARES is designed to drive automatic doors for use in the manufacture of motor vehicles.

Easy installation with two stem sizes (300mm and 400mm race), economic range, with obstacle detection and electronic soft shutdown.

Side bar or bar with bucket for tilting motor Erreka THE ATLAS.

Longingtwo meters per unit.

Electromechanical safety belt Clemsa, under the supervision of the cable tension and with sensitivity regulation. What. Recommended use for folding doors. Sensitive throughout the course of the band (even extremes).

Electromechanical engine Clemsa TO 300 for folding doors up to 3 metres in length per sheet, of semi-intensive residential use. 

Hydraulic motor for tilting doors one or two-bladed counterweights with a not more than 14 m2, for residential, community or industrial use.

Curved arm Motorline reference ARC007 other, of circular cross-section type ROPER or not overflowing.

The curved arm is necessary for most Roper manufacturer swing doors.

KIT Electromechanical engine V2 AZIMUTH irreversible for sectional and tilting doors up to 8 m2.Starting force 500 N 50 kilos .

Motorcycles V2 Electromechanical doors for sliding doors of 500, 600, 800, 1000, 1200 and 1500 kg with magnetic finishes and digital maneuver board with encoder.

Tube motor Motorline designed to power chest-type arm curtains, allows the application of various accessories to work with all types of pipes.

Sectional engine guides Pujol STC600 & STC1000, pre-assembled in two pieces in aluminium or iron format.

Electronic plate for replacement Clemsa FAAC 740, 741 and 748 of sliding doors at 230 V.

230Vac or 12-24Vac/dc plug-in receiver relay interface, with a programmable channel allowing the use of a plug-in receiver in installations without radio connector.

Usable in all types of temperatures between -20/+60.

Valid for any ERREKA receiver.

Kit's OXYGEN hydraulic motors at 230V intensive use for swing doors up to 3 meters per sheet.

The PARIS series engines are available in: the following paragraph is added: (lock on opening and closing) and REVERSIBLE format (without locking with which electrical electric lock would be needed for locking the sheets in the closure). The actuators have a 240 mm stem for residential or community doors up to 350 kg.

OXYGEN NYX 230V motor for residential sliding doors up to 1,000 kg, with built-in box-receiver and mechanical racing ends.

The 230V NYX electromechanical motor is thought to power light or heavy doors up to 1,000 kg for residential or industrial use.

Leverage unlock PUJOL MINI MARATHON & MARATHON DC with pump and keys.

Electronic plate Forsa "Evolution' to replace the manoeuvring frames of the RAYO tilting engine.

The 'Evolution' manoeuvre panel is compatible with sliding doors or sliding doors. The built-in receiver Forsa NEWFOR 868 MHz is compatible with TP2 MINI transmitters (on request it can be supplied with GO DMIL receiver).

It's an old model.

Plaque with Cross mark CAME MONDRIAN 4

Silentbloc rear rubber hood hydraulic engine swing Hydom 3LC.

Issuer CAME TOP44RBN encoding RollingCode and FixedCode 433 MHz.

String Motorline ROSSO EVO

Spare belt for dry motor Motorline ROSSO EVO, compatible with ROSSO EVO models, 60, 100 and 120.

KIT engines Clemsa AA30 230 V electromechanical two-bladed swing doors for a maximum length of 3m by sheet. What. The AA30 model is ideal for automating residential doors for non-intensive use.

Hydraulic motor HYDOM MINIMAX for semi-intensive use for oversized two-bladed hinged doors (maximum 14m2). Allows manual opening and closing in the event of a power failure.

Maintenance on this engine is practically zero.

KIT 24V engine DEA model TEO 700 of 1000N, designed to drive other, of circular cross-section. What. It is the manufacturer's cheap and easy to install solution DEA.

Issuer Aprimatic model TX4E with RollingCode coding system. 4 channel remote control at 433.92 MHz.

Electromechanical engine Clemsa AA400 for swing doors up to 4 metres in length by leaf, designed for motorized residential use door. What. The model "AA400 424 B" allows us to perform a semi-intensive use motorization.

External engine unlocking Erreka sections for emergency locking.

Electromechanical motor of 24 V dc MEDVA PL500 for sliding doors of residential use up to 500 kg with built-in receiver box and 2 RollingCode controls.

KIT engine Pujol Marathon PRO Q II single phase for sliding doors up to 1000 kg residential, community or industrial. Equipped with electronic board and built-in receiver.

Irreversible 24Vdc motor with integrated control centre and absolute encoder, installed internally in a column of small dimensions, properly drilled.

The first engine Nice slippery for sliding doors up to 400 kg and a blade length of up to 6 m.

Digital manoeuvring chart V2 CITY2+ 230 V for sliding doors and doors equipped with two 24 V direct current motors.

Engine Forsa Electromechanical ERG 24V for revolving doors of a thickness of residential use up to 10m2. What. With encoder and end-of-course micro-switches on opening and closing. Unlocking by lever, maneuver board, anti-crush system, courtesy light and unlocking in case of power failure.

MX93 or MX94 double wall wireless control, applied to the surface for tubular motors Motorline.

With a truly revolutionary design, this double wall controller is on the front line regarding this issue. Ideal for houses with contemporary or modern architecture.

Repeat radio frequency signal at 433.92 MHz and 868 MHz quickly and easily to improve the emission range, only by connecting the repeater to 230 V. The repeater itself will be responsible for receiving the transmission of a control and sending it to the receiver improving emission power to achieve greater range.

Fixed support for mast barriers Motorline

Table of manoeuvres BFT "THALIA' with screen for one or two 24 V electromagnetic operators used in 230 V/500 W swing doors (in the Power version). The bi-channel radio receiver at 433 MHz has been incorporated.

It has an anti-crushing system based on D-Track technology, manages decelerations during opening and closing and has an electronic self-learning function.

The main functions include: automatic closing, rapid closing, partial opening and manned operation.

Kit Magnetic keys for manual key fitting Clemsa without the need for a duplicating machine.

Engine Nice 24 V SPINBUS with magnetic encoder for sectional doors of up to 17,5 m2 and tilting doors of up to 14,7 m2.

Irreversible electromechanical gearbox motor 230 Vac for residential use, 24 Vdc motor with magnetic encoder. Use with SNA30 - SNA31 strap guides or SNA30C - SNA31C chain guides.

Probe cable for PC-Copy machine with 3 and 4 pin outputs for fixed and evolutionary codes.

The ARI02 kit of Erreka they 're hardware to power sliding doors that are telescopic, and we supply it with a 3-metre guide and chain drive system.

This transmission kit is recommended for use on sliding engines with mechanical running ends.

PUJOL model WINNER PRO 600/200 designed to automate rolling shutters for garages and commercial premises, with lifting capacity up to 170 kg.

The WINNER PRO engine has no electro brake and is designed for 48/60mm axles and 200/220mm pulleys.

Kit's OXYGEN SARGON 230 V electromechanical motors for residential swing doors up to 3 m in length per sheet.

The engines of the SARGON series have a 300 mm stem and are designed for use in lightweight doors up to 250 kg.

Digital keyboard V2 KIBO backlit model by radio In the case of vehicles of categories M1 and N2 or wired version (requires DEC4 decoder).

Issuer Nice It was One model "ON4CE" 4-channel at 433.92 MHz with multiple insertion sequential coding.

External release mechanism BFT "SET/S' for insulated sectional and tilting doors up to 50 mm thick.