Radio transmitter for safety-belt system for all types of automatic doors, without wiring thanks to its 868 MHz radio transmitter-receiver system.

NotesThe following: No receiver included, if you need the complete emitter-receiver kit you can find it below in the product accessories.

INSTALLATION AND USE

The BUR-STAR system is intended to be installed alongside an 8k2 security gate in garage door installations. This system enables the radio connection between the safety harness and the steering wheel. It is not guaranteed to be used to operate equipment other than that specified.

Install the transmitter as close as possible to the receiver. Do not install in environments with metal disturbances or interference, this could cause delay in the reaction of the system.

RECORD BUTTON

The burlete emitter paired with this receiver is already factory recorded. If you wanted to record a new one, you would delete the old one. It only allows one transmitter per receiver.

Press for 1s, turn on the recording LED and then press the "Test" button of the burlete emitter for 5sec. The Recording LED and Buzzer intermittently and automatically exit the recording mode.

TECHNICAL DATA

• Frequency of transmission/reception: FSK 868,35 MHz
• Number of broadcast channels: 1 channel or 3 channels
• Number of transmitters: 1 transmitter per receiver / 3 transmitters per receiver
• Maximum range: 10m without obstacles
• Power supply to receiver: 12v/24v cc/ca 220vac
• Power supply to the emitter: 3,6v (1x lithium battery 3,6v size "AA" Not rechargeable
• Standby emitter consumption: 0,004 mA
• Emitting power: 27 mA
• Stack duration approx: 1 year (included)
• Dimensions of the emitter: 86x61x41mm
• Dimensions of the receiver: 110x115x47mm
• Water resistance: IP65

MANUALS

Instruction manual Shockley BUR-STAR