Garage command Trinario Celinsa AK-1 which replaces the old Clemsa TX-1 with frequency 30.035

The encoding of this emitter is done by micro dip switch's.

Garage crew PPA the frequency range of the radio spectrum shall be as follows:.

Garage crew MEDVA model of the vehicle with 4-channel RollingCode coding at 868 MHz.

The new transmitter can be programmed remotely using a pre-programmed control or by pressing the "PROG EMISSORES" button on the receiver.

Module for the operation of 1 automatic open-stop-close in single or multi-group mode.

1 channel module for the operation of 1 automatic with step-by-step function (Open-Stop-Closure).

Garage crew Forsa Alpha mini with 2 channels with RollingCode coding system at 868 MHz.

This emitter comes with the code Alpha Towers so it won't work in garages where there's a different custom code. Activation can be done by the receiver button or remotely by radio with a pre-programmed control.

Module for the operation of 2 open-stop-close automatic systems in single or multi-group mode.

Garage crew Clemsa model MUTANcode N82 two channel, RollingCode 868 MHz.

" This model has been replaced by the model MUTANcode N82M "

Garage crew Hormann RSC2 EcoStar 2 channels with a frequency of 433,92 MHz.

Garage control Hörmann HSE4 868 BS BiSecur frequency is 869.3 MHz.

2 channel transmitter JCM MINI, rolling code type GO is 868 MHz.

4 channel remote control Somfy model Keytis 4 RTS for garage doors and frequency cancellation Rollingcode 433,92 MHz.

NICE Era One LR bidirectional long range 433 MHz with 4 buttons: 3 radio channels and 1 button to request automatic status.

NICE transmitters were One BD bidirectional of a kind used in motor vehicles: 3 radio channels and 1 button to request automatic status.

Radio frequency 433,92 MHz with rollingcode encoding, enabling code management, self-learning with 192 Bit encoding, also compatible with encoded receivers Nice O-code floor. The two-way Era One remote is compatible with previous versions of plug-in and external receivers Nice, operating in one-way mode.

Pro'sKit flat ceramic screwdriver 1PK-034ND is a screwdriver with the edge made of zirconium dioxide. What. Pro'sKit 1PK-034ND ensures maximum safety at work, as it is thermally and electrically insulated, antimagnetic and antistatic.

Garage crew Forsa model TP-4 with RollingCode coding system at 868 MHz.

This emitter comes with the standard code, so it won't work in garages where an installer has put in a custom code. It is 100% compatible with the receivers and receiver cards of this website Tecnoparking. Activation can be done by the receiver button or remotely by radio with a pre-programmed control.

Issuer AERF Earth C8 with channels 2-8-4-E RollingCode frequency 868 MHz.

It allows the use of up to 5 channels using a combination of buttons.

We know that remote control management takes a lot of time and travel for installers. Replacements, faulty controls and displacements to wrap those controls to power stations, etc.

PALGATE it solves all those problems with a simple click from the internet. What. Assign from our website, the unique and uncopyable code from your remote to the device you want, or several and select which button opens each door.

Microwave sensor for opening automatically closed doors, thus avoiding touching on handles and thrusters. It can be applied to any automatic door, to ensure convenient and safe access.

The SLIM SWITCH is a «contactlessuls Pusher for automatic door opening in narrow profile format.

Width of 40 mm suitable for placing in the door frame. The detection distance is up to 30 cm.

It has LED lighting to be seen even in the dark.

2 channel remote control Dorcas model K43 for opening a receiver Dorcas K4.

Garage command Emfa MTCH4 channel Rollingcode at 433 MHz for the new Emfa receiver series.

Control of household blinds Somfy this Regulation shall be binding in its entirety and directly applicable in all Member States unidirectional 1 channel at 433,42 MHz.

Control of household blinds Somfy this Regulation shall be binding in its entirety and directly applicable in all Member States unidirectional 5 channel frequency 433,42 MHz.

Issuer Nice It was Flor's 4-channel "FLO4RCE" model at 433.92 MHz with multiple insertion sequential coding.

Garage command Medva Powertech PR4 with coding RollingCode 433.92 MHz of 4 channels.

Activation of this emitter shall be carried out directly on the receiver according to the instructions of the control panel model.

Garage crew Erreka Four channel IRIS, rolling code at 868 MHz.

HYDOM transmitter model HD4 this is a four-button RollingCode at 433.92 MHz.

This emitter comes with the standard code, so it won't work in garages where an installer has put in a custom code. It is 100% compatible with the receivers and receiver cards of this website Tecnoparking. Activation can be done by pressing the receiver or remotely by radio with a pre-programmed control.

Garage crew DEA model GTI2M, 2 channel RollingCode at a frequency of 433.92 MHz.

Self-programmable model of standard code with the possibility of activation on the receiver or with a pre-programmed control.

Issuer Clemsa NT1 health care two-channel, unmatched Rollingcode 433.92 MHz system with a sleek and minimalist design.

Garage crew Sommer PEARL 4018 with 4 channels and frequency 868 MHz and 128-bit SOMloq2 signal transfer system.

Garage crew Forsa model RT-2 this is a 2-channel RollingCode 433.92 MHz.

Garage crew Forsa model RT-1 this is a one channel RollingCode 433.92 MHz.

" THE 1-BUTTON RT1 CONTROL HAS BEEN DISCARDED, YOU CAN USE THE MODEL INSTEAD 2 BUTTON RT2 "

The new TOGO VW remote control from Beninca uses a new 128-bit ARC encoding (Advanced Rolling Code).

The new encryption guarantees maximum security thanks to the security of the transmitted code (128 bits against the 64 of the previous TOGO).

Garage crew CAME the model TOP2DRBS Rollingcode frequency 433,92 MHz and 868 MHz.

Garage crew CAME model TOP4DRBS Rollingcode frequency 433,92 MHz and 868 MHz.

Transmitter FAAC TM XT1 433MHZ one channel for tubing motors for household blinds.

Garage crew MEDVA model of the vehicle with 3-channel RollingCode coding at 433.92 MHz.

Garage crew DEA model GT-4, RollingCode frequency 433.92 MHz with 4 channels.

Garage control of the CLEMSA brand, model MASTERcode MV12 two green buttons. The frequency of this remote is 433.92 MHz and coding is done by 8 switch system.

The command Clemsa MTH2 is an original compatible controller for 8-digit binaries and trinaries compatible with the vast majority of 433.92 MHz and low frequency off-the-shelf controllers.

Garage crew Clemsa model MUTANcode N82 this is a 2-channel mini format, RollingCode 868 MHz.

The new TOGO remote goes from Beninca uses a new 128-bit ARC encoding (Advanced Rolling Code).

The new encryption guarantees maximum security thanks to the security of the transmitted code (128 bits against the 64 of the previous TOGO).

The new TOGO remote goes from Beninca uses a new 128-bit ARC encoding (Advanced Rolling Code).

The new encryption guarantees maximum security thanks to the security of the transmitted code (128 bits against the 64 of the previous TOGO).

This is the ENTREMATIC ZEN4 garage door, Rollingcode at 433.92 MHz with 4 channels.

The ZEN4 model replaces the old model DITEC GOAL FOUR.

Garage crew Sommer 4050V 2-channel with a quartz frequency of 40.685 MHz and programming by combination of dip-swtiches is therefore configured by placing the corresponding combination of digits.

Issuer Aprimatic model TX4E with RollingCode coding system. 4 channel remote control at 433.92 MHz.

Garage crew Telcoma EDGE two channel rolling code 433.92 MHz.