PD16 maneuver box for Barrera V2 NIUBA

Maneuvering frame FAAC 455D for electromechanical or hydraulic motors of 230Vac.

The programming of the center FAAC 455D is performed using a Display of three pushers able to accurately configure all parameters of automatism.

Electronic spare plate BFT LINX for model engines BFT VIRGO.

Maneuvering frame CAME ZN6 (3199ZN6) 24V for motor sliding bXL series.

Medva QRF 24V H433 maneuvering table for electromechanical sliding motors 24V with Encoder, Inbuilt Receiver open source 433.92 MHz, with capacity for 255 emitters, force regulation and soft strike.

Maneuvering frame Beninca CP.JACK of 24V for built-in LCD and 433.92 MHz receiver doors.

Electronic plate CAME 24V ZL39B for use as spare parts in Barreras GT3750 and GARD4.

Electronic plate ROGER H70/104AC is compatible with Roger Technology brand sliding engines that work at 230V AC and be monophase asynchronous. This control center is designed to automate sliding and tilting doors, and is integrated into several brand engine models

Maneuvering frame Aprimatic T2-E for ONDA sliding engines and swing engines.

Time programming is done by potentiometers and has a connection for the receiver card.

BENINCA BULL 5M/8M without encoder.

Electronic Plaque CAME 3199ZL92, designed to deliver maximum performance and engine compatibility CAME ATI, AXO and KRONO of 24V. Ideal for automatic door management smoothies, this electronic card guarantees precise control, safety and durability in each opening and closing.

The electronic update kit FAAC 490114 is designed to modernize and improve motors of sliding doors FAAC 746MPS and 844MPS. This kit allows to replace the old control units, providing an efficient and up-to-date solution for door automation systems.

Electronic plate DEA TE700

Electronic plate Nice SPA600 for SPIDO600 sectional motor

Electronic central budget Erreka RINO AP600S002 of 230V.

Central Beninca CP.B6-1024 TURBO 24V with built-in receiver compatible with BULL624 TURBO and BULL1224 TURBO engines.

Electronic plate Nice RBA2/A (SPRBA2) for ROBUS 350 sliding engine.

Central or maneuvering frame Nice SOON reference SPSOA2R10 compatible with the former central Nice SOA2.

SOMMER 11515V407 electronic plate for SPRINT & DUO motor. FM frequency 868 MHz.

Table of manoeuvres Nice SP081-B control center electronic card A824.

Central Nice WLA1 for WALKY articulated motor WL1024C.

Table of manoeuvres sectional motors BFT VENERE MA X B GDA reference I700072 10001.

It incorporates 433 MHz receptor compatible with MITTO emitters, with capacity of up to 63 emitters, expandable by socket to connect a receiver to expand the number of commands.

Electronic plate BFT "BOTTICELLI VENERE BT TO SAY" with a built-in 433 MHz receiver and display to perform parameter settings.

I'm not going to tell you what to do with a built-in 433.92 MHz manoeuvre frame compatible with VARIO controls.

The electronic plate has a socket to add a 6-pin receiver card externally.

This is a 24V Medva PL1000 sliding motor control panel.

Attention the replacement is supplied without the box/casing. Only electronics are supplied.

Electronic plate LIFE RG1R DL for sliding engines with built-in receiver and mechanical end-of-race tickets.

Attention the delivery time of this plate is 10 to 15 days

Table of manoeuvres V2 PD20 for sliding motors FORTECO / AYROS with inverter technology.

Table of manoeuvres Nice SPNKA3R10 for NAKED engines after 2018.

Electronic plate BFT SHYRA for sliding engines "WE AC A".

Electronic plate PPA "TRIFLEX FULL RANGE DISPLAY' for sliding engines of the JETFLEX series.

Electronic plate FAAC E680S compatible with the 24V automatic barrier B680H.

Electronic plate Nice SNA1 for SPIN10, SPIN11 and SN6011 engines.

Ditec E1HBOX electronic board with built-in receiver with potentiometers to regulate force and manoeuvre times.

Electronic plate DEA NET324 for sliding engine LIVI 3/24E.

Replacement plant Nice SNA2 for SPINBUS SN6021 sectional engines.

Electronic plate CAME & MOTOSTAR XS100.

Table of manoeuvres Aprimatic T240 for 1 motor at 230V, intended for use in ONDA sliding motors.

Electronic plate CAME Z3P for use in the manufacture of motor vehicles [1] regulation of deceleration speed. What. It doesn't incorporate a receiver.

Table of manoeuvres Clemsa "SPRINT M24' for sliding engine 'AC424N'.

Electronic plate "PD14" for use as spare parts in sliding motors V2 OTHER IT 'S 24V .

The PD14 is equipped with a display that allows, in addition to easy programming, the constant visualization of the status of the entries; in addition, the structure with menus allows a simple programming of working times and operating logic.

Electronic plate DEA NET724N for sectional engines ADVANCE & SPACE.

In the case of vehicles of categories M1 and N2 with a maximum mass not exceeding 2000 kg:

NICE SPWA20 electronic plate for barriers WIL4 and WIL6

Electronic plate CAME 3199ZLJ14 for controlling 24Vdc actuators compatible with the AXO, FROG, FERNI, FAST engines.

Electronic plate BFT SCHEDA VENERE ARGO G. THIS IS THE FIRST TIME.

Electronic plate FORSA/SEA "SLIDE DG" with digital programming for sliding or swinging 230Vac doors.

Electronic plate Medva QRF H4 24Vdc for 24V sliding motors with emergency battery connection terminals. It has: incorporated receiver RollingCode 433,92 MHz.

Table of manoeuvres Erreka RINO Inverter is 230V.