Parts and accessories of machinery V2 S.H.I.E.L.D.-180's outer orientation and sync.

Electronic housing assembly TMP Sprint low + lock unlock with 2 keys.

RFID proximity reader with independent access control, capable of adding up to 10000 users.

Ideal for outdoor use, with anti-passback and anti-vandalism function.

Requirements for the identification of the device Motorline For use with ML4S access control.

KITs Electromechanical engines DITEC PWR50 24V for heavy duty double swing doors with a leaf length of up to 5 metres.

Reversible actuator DITEC The 24 Vcc PWR50 is intended for frequent and intensive use. With machinery for making pulp of fibrous cellulosic material.

Base or bench PPA in iron for sliding motors.

Machinery and apparatus DEA TEO700 steel allowing to gear the engine axle with the cog wheel.

Sets of watertight seals or retainers BFT LUX.

Replacement rope unlock Motorline RED EVO.

Sliding engine BFT "DEIMOS ULTRA BT A" 24V electromechanical for charges of up to 400/600 KG with intensive use and magnetic run ends.

Replacement nylon crown BFT For the purposes of this Regulation, the following definitions shall apply:

Plastic housing for sliding motors Nice THOR IS 1500.

Plastic housing for sliding motors EMFA CU in black.

KIT Closing caps + cable insertion and rubber resistance V2.

Motor gearbox FAAC D600.

Outdoor antenna designed for installations with reception problems due to obstacles such as metal surfaces, radio shadow zones or long distances.

The external antenna RET 400 needs to be connected a decoder card or Access Control, replacing these to the affected receivers if necessary. This connection is carried out using only two wires, so the installation is simple by taking advantage of cables from old installations of other equipment

Removable memory card GO FORSA with capacity for 500 users.

DEA "NET-NODE 2.0" is a device that connects to DE@NET hubs and external receivers.

Thanks to NET-NODE, for programming with a smartphone you can use the DEAinstaller and DEAuser applications on your smartphone. It is only compatible with DE@NET power plants equipped with serial port and NETLINK technology.

Sliding engine Beninca "BULL5M' 230V for residential use up to 500 KG with built-in receiver. What. Possibility to optionally add Encoder and Magnetic Race Ends.

Replacement plant Nice SNA2 for SPINBUS SN6021 sectional engines.

230Vac to 20V transformer with 150VA and 4A.

Electronic plate PPA "TRIFLEX FULL RANGE DISPLAY' for sliding engines of the JETFLEX series.

End of motor racing DEA Liv or Rev.

Motor for sectional doors Aprimatic BLACK BOX 24V for semi intensive use.

» BLACK BOX 600 N for sectional doors up to 10m2

» BLACK BOX 800 N for sectional doors up to 12m2

» BLACK BOX 1200 N for sectional doors up to 16m2

Motor head Medva Vulcan for residential sectional doors with anti-crush and soft-stop system.

The operator has a maneuver board and a built-in receiver.

Attention This product does not include the Guide. The engine head is supplied for use as a replacement.

Sliding engine pinion BFT ARES, ICARUS, AND ERGO.

The two-channel SOMMER receiver S10696-00001.

The SOMMER bi-directional receiver is compatible with SOMLoq2 remote controls: Pearl 4018, Pearl 4019, Pearl status S10448, Slider S10305.

Surface-mounted photocells V2 DFN to embed auto-aligned and synchronized.

Motor head CAME VER10PLUS from 1000N to 24V with electronics for sectional doors up to 18m2.

Automation for sliding glass doors Motorline with its automatic and silent sliding system, the KAPVSP Simples glass door, is the perfect solution to improve the inflow and outflow of people from the buildings.

Designed for a daily intense and continuous use.

Plain lock Nice PPD1630.

Connection belt and recessing motor CAME V0685, V0686, V0688.

Unlocking knob Erreka PUMA & RINO.

Bulon guitar drag EMFA

Key unlock motors sliding Motorline sLIDE and OL series.

Sectional motor chain guide EMFA 3350 mm MTCH.

Spare parts 3350 mm chain guide compatible for motor section EMFA MTCH, equipped with adjustable chain thanks to the already mounted coupling. Equipped also with the manual drag and unlock car to activate the automatism in case of lack of the electric current.

Designed with high quality materials and optimal length, this guide ensures a smooth, safe and efficient movement of your door's sectional motor.

RadioBand Prastel TCO7SG-KIT for safety bands resistive 8.2 KΩ where its radiofrequency link to 868 MHz between Emisor and Receptor makes it an excellent choice for the use in residential or community doors of the type sliding doors, tilting or canceling battens.

26Vdc/2Ah Li-Ion battery with 50cm connection cable. It includes protection of load and discharge voltage and protection against short circuits.

The keyboard Motorline Wireless TEC2 is ideal for pedestrian doors and accesses, designed for access control, simple and effective assembly thanks to radio frequency 433.92 MHz avoiding electrical wiring.

The degree of iP65 protection ensures protection against dust and water, guaranteeing reliable performance even under demanding conditions.

Built in reinforced aluminium, resists attempts of vandalism, while wireless installation simplifies implementation, making it quick and practical.

PD16 maneuver box for Barrera V2 NIUBA

Engine Erreka LINCE to 24Vdc for residential sliding doors up to 650 kg with electronic obstacle detection and end of run (encoder).

The Control Panel Clemsa CLASS 5 is designed to govern automatic doors of intensive use, sliding, tilting and folding type with 1 and 2 blades, with single and three-phase drives of 230 V AC or 380 V AC and up to 1500 W of power.

Motor kit FAAC 740 EZ16 to 230V for residential sliding doors up to 500 kg.

Electric locks Erreka LBE20 down 230Vac with inner cylinder.

It is used as a leaf-locking device in automated vibrating shutters. It can only be unlocked from the inside. We don't have a light bulb on the outside.

Hydraulic motor Erreka 230Vac ATLAS for residential or community intensive use for doors up to 15 m2 with an obstacle detection system. Available in reversible or irreversible versions and with anti-lock system.

The Juguar Low is a 24V electromechanical motor with built-in central for doors from 2.5 to 5 meters. What. It is the most robust and fastest electromechanical motor to place, and has a telescopic arm.

Analogue manoeuvring table for 1 or 2 sheet swing doors with built-in receiver. What. Includes electronic deceleration at end of run. Motor thrust force control by torque limitation.

KIT's engine Clemsa AA30 electromechanical 230V for one-bladed swing doors for a maximum length of 3m by sheet. What. The AA30 model is ideal for automating residential doors for non-intensive use.