Bulon guitar drag EMFA

Parking controls BFT 2-channel COOL MITTO, RollingCode 433.92 MHz system.

Receiver Forsa ST500 wiring with 2 independent channels frequency 868.35 MHz for TP2/TP4 commands.

Key unlock motors sliding Motorline sLIDE and OL series.

Sectional motor chain guide EMFA 3350 mm MTCH.

Spare parts 3350 mm chain guide compatible for motor section EMFA MTCH, equipped with adjustable chain thanks to the already mounted coupling. Equipped also with the manual drag and unlock car to activate the automatism in case of lack of the electric current.

Designed with high quality materials and optimal length, this guide ensures a smooth, safe and efficient movement of your door's sectional motor.

26Vdc/2Ah Li-Ion battery with 50cm connection cable. It includes protection of load and discharge voltage and protection against short circuits.

Communicator Motorline M250 with integrated microSIM data card that allows to control devices remotely in real time, even in places without internet access via Wi-Fi or cable.

Accessability, from anywhere in the world, to all the features of the device through the APP MCONTROL.

The keyboard Motorline Wireless TEC2 is ideal for pedestrian doors and accesses, designed for access control, simple and effective assembly thanks to radio frequency 433.92 MHz avoiding electrical wiring.

The degree of iP65 protection ensures protection against dust and water, guaranteeing reliable performance even under demanding conditions.

Built in reinforced aluminium, resists attempts of vandalism, while wireless installation simplifies implementation, making it quick and practical.

PD16 maneuver box for Barrera V2 NIUBA

Antenna Motorline MA4 with reach up to 100m with cable and support compatible with 433 MHz frequencies.

Engine Erreka LINCE to 24Vdc for residential sliding doors up to 650 kg with electronic obstacle detection and end of run (encoder).

The Control Panel Clemsa CLASS 5 is designed to govern automatic doors of intensive use, sliding, tilting and folding type with 1 and 2 blades, with single and three-phase drives of 230 V AC or 380 V AC and up to 1500 W of power.

Motor kit FAAC 740 EZ16 to 230V for residential sliding doors up to 500 kg.

Electric locks Erreka LBE20 down 230Vac with inner cylinder.

It is used as a leaf-locking device in automated vibrating shutters. It can only be unlocked from the inside. We don't have a light bulb on the outside.

Hydraulic motor Erreka 230Vac ATLAS for residential or community intensive use for doors up to 15 m2 with an obstacle detection system. Available in reversible or irreversible versions and with anti-lock system.

KIT's engine Clemsa AA30 electromechanical 230V for one-bladed swing doors for a maximum length of 3m by sheet. What. The AA30 model is ideal for automating residential doors for non-intensive use.

The unlock safe LCBLIND09 it is designed to perform the functions of manual key and lever selector, in installations for motorised revolving doors.

Engine Clemsa AA30 electromechanical 230V for one-bladed swing doors for a maximum length of 3m by sheet. What. The AA30 model is ideal for automating residential doors for non-intensive use.

Hydraulic operator Aprimatic TWENTY 270 for swinging canes one or two leaves, semi-intensive use. Speed deceleration closing. Built-in anti-crush safety valves. Quick emergency release. Useful length of stem 270 mm. Stem diameter is 16 mm.

Machinery for making pulp of fibrous cellulosic material Motorline TELICA 230V for hinged doors with reduced space for leaves up to 2.5 metres.

I'm going to go with the P-1. Designed for roll-over doors up to 530 kg weight. What. Suitable for automating locks with side drive and gearbox.

Integrated electronic equipment that allows opening by key, button or remote control. Manual operation by crank.

" This product has been discontinued in 2024 and PUJOL has stopped manufacturing "

Motor kit CAME A5000A electromechanical 230V for one-bladed swinging blades up to 5 m, with a maximum weight of 400 kg.

Operator Forsa Reversible electromechanical COUGAR in oil bath for intensive use on doors up to 5 metres and/or 400 kg.

Table of manoeuvres V2 CITY9 an analogue 230 V for sliding doors.

" TABLE CITY9 HAS BEEN REPLACED BY NEW FLEXY2 MODEL FULLY COMPATIBLE "

Table of manoeuvres V2 EASY1 230V analogue for blinds, blinds and awnings with built-in receiver 433.92 MHz.

Curved arm PUJOL reference 900500090 other, of circular cross-section type ROPER or not overflowing.

The curved arm is necessary for most Roper manufacturer swing doors.

Pre-assembled chain guide V2 THE AZIMUTH.

Electric locks Nice PLA10 to 12V for sliding doors.

The use of these electric locks is mandatory for non-lock vibrating motors with blades over 3 metres.

Security transmitter by radio 868MHz Erreka RADSECTX that next to the receiver Erreka RADSECRX will get two-way radio communication for the security bands.

Electromagnetic lock Motorline EF70 with a capacity of up to 70 kg at 12 Vdc to 24 Vdc power supply.

Kit Barrier shortage FAAC B614 in length 2 and 3 metres

Outer receiver Forsa of 230Vac for TP2 emitters at 868 MHz, with capacity for 500 users and 2 relays.

Hydraulic motor for tilting doors one or two-bladed counterweights with a not more than 14 m2, for residential, community or industrial use.

Engine Motorline KVM105 is a drive shaft automatic, for automation of industrial sectional doors of up to 35m2, with the possibility of horizontal or vertical application. The ease of installation, configuration and maintenance makes it ideal for all types of sectional doors.

Engine FAAC 413 electromechanical 230 V for residential swing doors of up to 1,80 m (without electric lock) or up to 2,50 m (with electric lock).

DOOYA transmitter 15 channels 433,92 MHz for tubular motors for household blinds (with fan function).

The remote offers a plastic finish with a digital screen to switch between channels to make it work up to 15 household blinds. What. It incorporates a magnetic base to place the remote on the wall.

The transmitter frequency is 433.92 MHz and is powered by a 3V lithium battery (CR2032).

Electromechanical engine V2 OTHER for use in the manufacture of motor vehicles residential buildings up to 9 m2.

Electromechanical engine V2 STARK6 irreversible in 230V and 24V format for swing doors with blades up to 6m. Designed to power residential or small semi-intensive community doors.

Straight telescopic harnesses for hydraulic motors Erreka the ATLAS model.

Complete kit of engine Motorline, with an innovative and modern design, developed for automation of other, not further worked than hot-rolled, hot-drawn or extruded. What. This engine is irreversible and possesses adjustable running ends at opening and closing. What. Available in 230Vac and 24Vdc.

Control panel Clemsa CR81 with built-in receiver Rollingcode Mutancode 433,92 MHz for rolling shutters and blinds.

This kit includes 2 Rollingcode NT2 controllers at 433.92 MHz.

Table of manoeuvres Clemsa 24 Vdc for sectional doorss residential, ideal for replacement of the AS60/AS120 engine.

Engine Aprimatic SR350 electromechanical for use in the manufacture of motor vehicles [1] residential overhangs up to 3,5 metres by leaf and 300 kg weight.

The electromechanical operator is sturdy and is built on an injected aluminium chassis and coated with polyester paint. Available in reversible and irreversible format.

Radio transmitter for safety-belt system for all types of automatic doors, without wiring thanks to its 868 MHz radio transmitter-receiver system.

NotesThe following: No receiver included, if you need the complete emitter-receiver kit you can find it below in the product accessories

In the case of vehicles of categories M1 and N1 with a maximum mass exceeding 2000 kg: for duplication of fixed-code commands such as binaries and trinaries.

* Special prices for professionals. Contact us to open your file.

Motor kit CAME Ver06 from 600N to 24V for sectional doors up to 9 m2 with chain guide and Rollingcode Emitter.

Proximity reader V2 CLOSE for Read & Write keys.

ROX is an electromechanical gearbox motor for the automation of sliding doors up to 600 kg for residential use: has an electronic control unit incorporating a 433,92 MHz radio receiver with coding FLO, FLOR, OPERA, HCS SMILO.

ATTENTION: THE NICE ROX600 ENGINE HAS BEEN DISCONTINUED FOR THE BETTER PERFORMANCE ROBO600 MODEL. WE HAVE THE ROBBERY KIT IS 600.