The unlock safe LCBLIND09 it is designed to perform the functions of manual key and lever selector, in installations for motorised revolving doors.

Engine Clemsa AA30 electromechanical 230V for one-bladed swing doors for a maximum length of 3m by sheet. What. The AA30 model is ideal for automating residential doors for non-intensive use.

Hydraulic operator Aprimatic TWENTY 270 for swinging canes one or two leaves, semi-intensive use. Speed deceleration closing. Built-in anti-crush safety valves. Quick emergency release. Useful length of stem 270 mm. Stem diameter is 16 mm.

Machinery for making pulp of fibrous cellulosic material Motorline TELICA 230V for hinged doors with reduced space for leaves up to 2.5 metres.

I'm going to go with the P-1. Designed for roll-over doors up to 530 kg weight. What. Suitable for automating locks with side drive and gearbox.

Integrated electronic equipment that allows opening by key, button or remote control. Manual operation by crank.

" This product has been discontinued in 2024 and PUJOL has stopped manufacturing "

Motor kit CAME A5000A electromechanical 230V for one-bladed swinging blades up to 5 m, with a maximum weight of 400 kg.

Operator Forsa Reversible electromechanical COUGAR in oil bath for intensive use on doors up to 5 metres and/or 400 kg.

Receiver module Motorline MR10 to 30 transmitters.

It can incorporate MC230/MC400/MR12 power supplies.

Table of manoeuvres V2 CITY9 an analogue 230 V for sliding doors.

" TABLE CITY9 HAS BEEN REPLACED BY NEW FLEXY2 MODEL FULLY COMPATIBLE "

Curved arm PUJOL reference 900500090 other, of circular cross-section type ROPER or not overflowing.

The curved arm is necessary for most Roper manufacturer swing doors.

Pre-assembled chain guide V2 THE AZIMUTH.

Security transmitter by radio 868MHz Erreka RADSECTX that next to the receiver Erreka RADSECRX will get two-way radio communication for the security bands.

Telescopic bearings for the electro-mechanical motor Dea LIVI 902SR for sliding doors.

Kit Barrier shortage FAAC B614 in length 2 and 3 metres

Outer receiver Forsa of 230Vac for TP2 emitters at 868 MHz, with capacity for 500 users and 2 relays.

Hydraulic motor for tilting doors one or two-bladed counterweights with a not more than 14 m2, for residential, community or industrial use.

Engine Motorline KVM105 is a drive shaft automatic, for automation of industrial sectional doors of up to 35m2, with the possibility of horizontal or vertical application. The ease of installation, configuration and maintenance makes it ideal for all types of sectional doors.

Engine FAAC 413 electromechanical 230 V for residential swing doors of up to 1,80 m (without electric lock) or up to 2,50 m (with electric lock).

DOOYA transmitter 15 channels 433,92 MHz for tubular motors for household blinds (with fan function).

The remote offers a plastic finish with a digital screen to switch between channels to make it work up to 15 household blinds. What. It incorporates a magnetic base to place the remote on the wall.

The transmitter frequency is 433.92 MHz and is powered by a 3V lithium battery (CR2032).

Electromechanical engine V2 OTHER for use in the manufacture of motor vehicles residential buildings up to 9 m2.

Electromechanical engine V2 STARK6 irreversible in 230V and 24V format for swing doors with blades up to 6m. Designed to power residential or small semi-intensive community doors.

Straight telescopic harnesses for hydraulic motors Erreka the ATLAS model.

Complete kit of engine Motorline, with an innovative and modern design, developed for automation of other, not further worked than hot-rolled, hot-drawn or extruded. What. This engine is irreversible and possesses adjustable running ends at opening and closing. What. Available in 230Vac and 24Vdc.

Table of manoeuvres Clemsa 24 Vdc for sectional doorss residential, ideal for replacement of the AS60/AS120 engine.

Engine Aprimatic SR350 electromechanical for use in the manufacture of motor vehicles [1] residential overhangs up to 3,5 metres by leaf and 300 kg weight.

The electromechanical operator is sturdy and is built on an injected aluminium chassis and coated with polyester paint. Available in reversible and irreversible format.

Radio transmitter for safety-belt system for all types of automatic doors, without wiring thanks to its 868 MHz radio transmitter-receiver system.

NotesThe following: No receiver included, if you need the complete emitter-receiver kit you can find it below in the product accessories

L JDM vehicle magnetic loop detector Erreka for 1 or 2 loops, mainly used to detect vehicles, with 2 two-way relay outputs.

Electromechanical engine Clemsa AA 400 for folding doors up to 4 metres in length per sheet, of semi-intensive residential use (model 230V).

The kit includes a 400mm barrel engine locked with gearbox, receiver and controls.

Aperture sensor through the pressure exerted on the carpet, with a weight capacity up to 800Kg. Ideal for access control where the only action required to open the door is to step on the carpet. What. It was developed with small spaces in mind, like store entrances or other places very close to hallways where, with a radar, there would be many false door openings

In the case of vehicles of categories M1 and N1 with a maximum mass exceeding 2000 kg: for duplication of fixed-code commands such as binaries and trinaries.

* Special prices for professionals. Contact us to open your file.

Motor kit CAME Ver06 from 600N to 24V for sectional doors up to 9 m2 with chain guide and Rollingcode Emitter.

Emergency battery with built-in battery charge for engines V2 Ayros and Alfariss.

ROX is an electromechanical gearbox motor for the automation of sliding doors up to 600 kg for residential use: has an electronic control unit incorporating a 433,92 MHz radio receiver with coding FLO, FLOR, OPERA, HCS SMILO.

ATTENTION: THE NICE ROX600 ENGINE HAS BEEN DISCONTINUED FOR THE BETTER PERFORMANCE ROBO600 MODEL. WE HAVE THE ROBBERY KIT IS 600.

Microwave sensor for opening automatically closed doors, thus avoiding touching on handles and thrusters. It can be applied to any automatic door, to ensure convenient and safe access.

Spin 650N NICE engine for sectional doorss up to 8,8m2 and swings up to 9,8m2.

Table of manoeuvres Nice MC800 for 230 V swing door motors with BlueBUS technology and Opera system.

With technology Nice BlueBUS, compatible with the Opera system, for the management, programming and diagnosis of automation, also remotely.

Compatible with the Opera system which, through the O-View multifunction screen, allows you to customize the system by modifying the opening and closing positions, the leaf gaps and decelerations, changing for each motor parameters such as, for example, force, speed, sensitivity to obstacles.

2-metre lathe the unit for Medva swinging or tilting hydraulic motors with their respective racors.

Manufacture from materials of any heading Erreka ARC 230V for articulated arms for swing doors up to 2,5 m with wide pillars. What. The arms are available in 450mm or 650mm.

Electromechanical actuator V2 STARK3 irreversible 230V or 24V format for sliding doors with blades up to 3 m ideal length for powering residential doors. Equipped with mechanical opening cap.

Hydraulic motor 230 V FAAC 593 for sliding doors up to 3500 mm wide and 2700 mm high.

Garage command Trinario Celinsa AK-1 which replaces the old Clemsa TX-1 with frequency 30.035

The encoding of this emitter is done by micro dip switch's.

PUJOL model WINNER PRO 600/200 designed to automate rolling shutters for garages and commercial premises, with lifting capacity up to 170 kg.

The WINNER PRO engine has no electro brake and is designed for 48/60mm axles and 200/220mm pulleys.

Pinon Z15 M4 slide for engines Nice from the ROBUS and THOR series

Electronic plate CAME ZL56 for 24 V V900E sectional motor, ideal for use as a spare or replacement.

Issuer of the copy Remocon RMC165CS for fixed code duplication at 433,92 MHz.

The duplication must be done with the machine Remocon HDC 900.

* Special prices for professionals. Contact us to open your file.

MINGARDI MICRO+ chain actuator for hanging windows.

Drive rod for the lid with hinged windows and sash windows.

For the purposes of this Regulation: Nice; SHEL50KCE, SHEL75KCE, SPIN10KCE, SPIN11KCE, SPIN21KCE, SPIN22KCE, SPIN23KCE, SPIN40/A. THIS IS NOT THE FIRST TIME I'VE SEEN THIS.

Portable transmitter CAME 15 channels and frequency 869.50 MHz. Color white.