Damper with regulation and magnet Medva"CIL3095" with 95mm stroke designed to dampen the closures of industrial sliding doors.

The linear damper CIL3095 – CIL30120 reduces the speed of the door during the final stretch of the tour, avoiding sudden knocks and personal injury. The speed can be adjusted according to the need of the installation. The shock absorber is automatically charged by the neodymium magnet each time the door is opened, being operational for the subsequent closing cycle.

Hydraulic oil Clemsa/FAAC in a 2-litre bottle.

KIT Sliding engine BFT "DEIMOS ULTRA BT A" 24V electromechanical for charges of up to 400/600 KG with intensive use and magnetic run ends.

Quartz transmitter Aprimatic tG2C model of two channels, fixed code, quartz to frecuencua 27.195 MHz. Programming by placing dip-switch.

Engine Erreka TORO for heavy residential, community or industrial sliding doors up to 1800 kg or 2500 kg with programmed cruising and deceleration, easy unlocking and magnetic race ends.

Control panel with built-in receiver Clemsa CR81 (433 MHz) or CR81.8 (868 MHz) for retractable closures.

Engine EMFA 24V SKYLINE model, for residential or industrial sliding doors up to 600 kg. This equipment has a system that allows the pinion to oscillate and adapt to the irregularities of the zipper, even at gradients of up to 35 mm.

KIT engines Motorline Electromechanical winch at 230Vac or 24Vdc for swing doors of 10 to 20 feet per sheet. It incorporates main, two controls and a security photocell.

A one-channel receiver operating in both mono-stable and bi-stable mode, capable of storing up to 500 12-bit or Rolling-Code codes.

It's only compatible with the controls Motorline model FALK and MX4SP.

Unlock safe with NICE KIO key selector with wire pull mechanism, ideal for the unlocking of the electric brake in roll-over motors in the event of a power failure in order to operate the blind manually.

Head Electric motor V2 AZIMUTH irreversible for sectional and tilting doors up to 8 m2.Starting force 500 N 50 kilos .

With this electronic card you can light up your garage by opening the door to the entrance or exit.

It is very easily placed on the control board and can be programmed to be turned on by pulse or timer.

Manufacture from materials of any heading Forsa transmitter-receiver NEW MINI ideal for outdoor use with a maximum range of 20 metres, where we have a small space for the installation of these safety devices.

End of race Erreka Bull KM1800 with Hall sensor.

Motor head EMFA MTCH of 800N and 1,000N with built-in receiver box for residential sectional doors.

Hydraulic oil 1 litre DEA reference 600H.

Receiver DEA external bi-channel with capacity to store 1000 emitters.

Alkaline battery AAA of 1.5 V LR03 of the brand GP. What. Blister x4

Motion detector FAAC XBFRM1 (single directional microwave radar).

Key selector Beninca Two-touch TOKEY with metal housing.

Additional accessories to the electromechanical barrier V2 I'M GOING IN.

Electronic plate Erreka NAOS 70/100, ideal as a replacement to replace the built-in panel.

Battery GP 3V lithium CR2 in a blister.

Blister of the brand GP. What. Battery 27A at 12V

Programmable control panel. Rolling and sliding actuators 230 V or 400 V. Max. 1500 W.

Lock and key

GO DMIL garage transmitter with 2 channels at 868 MHz.

The new emitter can be activated with a previously memorized control or by recording it directly on the receiver button.

Transponder T5 for the xHorse cloning machine VVDI Key Tool's.

KIT swinging motor Motorline LINCE for residential cancellations. What. Models of 230 Vc and 24 Vdc for running 300 mm, 400 mm, 600 mm

Proximity reader Nice IT WAS A TRANSPONDER READER for cards and badges with a transponder.

Electromechanical engine DEA "LIVI 902' 230V or 24V for semi-intensive residential swing doors up to 9m2.

The 'LIVI 902' version does not incorporate a manoeuvre chart and the 'LIVI 905' version incorporates a digital manoeuvre chart. The engine travel is done by Encoder but optionally you can acquire the end of race system.

The Sprint Low is a 24V electromechanical motor that includes a gearbox and receiver for 255 emitters. What. For residential or communal sliding doors.
It is manufactured with the highest quality products and is undoubtedly the fastest automation on the market in its placement in sliding doors as it lacks exact quotas, and thanks to its pivot pin , it always fits the zipper.

Replacement plate EMFA The Skyline sliding motor up to 600 kg. The manoeuvre chart incorporates a receiver Rolling code at 433.92 MHz.

Table of manoeuvres Nice OGA0 to 24V for SHEL50KCE, SHEL60KCE and SHEL75KCE sectional motor. What. The plate has a built-in receiver at a frequency of 433.92 MHz and functions of automatic shutdown, motion regulation and reversal of motion in case of obstacles during travel.

Hydraulic motor EMFA TOR 4A & TOR 5A for heavy use swing doors for residential, community or industrial canopies for leaves from 4 metres to 7 metres in length.

OXYGEN SARGON 230 V electromechanical motor for residential swing doors up to 4 m in length per sheet.

The SARGON series engines have a 400 mm stem and are designed for use in lightweight doors up to 250 kg.

Unlocking lever assembly DEA LIVI 400/800 with its respective light bulb and 2 keys.

Hydraulic motor EMFA Global Reversible and Irreversible community sliding doors intensive use with force regulation and smooth stopping.

It shall be so designed and constructed as to conform to the requirements of this Regulation.

24 V hydraulic motor BFT "FAST ULTRA BT A' for hinged doors of heavy use up to 5 metres in length. It incorporates a selectable locking system and magnetic run ends.

Full range of highly intensive use oleodynamic pistons, suitable for any type of application: residential, industrial or community.

KIT End of the race DEA LIVI 902/905 for electromechanical tilting motors.

Spare set end of race Nice SPIDER AND SPIDER.

Universal assembly with P-6 motor valve Pujol P1 for chain roller blinds.

Issuer Prastel SLIM2E+ RollingCode 2-channel, 433.920 MHz, XP and RW+ code management, encrypted transmission.

Roof motor Erreka NAOS for sectional garage doors up to 15m2 24Vdc with encoder capable of lifting up to 100 kg. What. Includes receiver for up to 20 codes.

LED signalling lamp with fixed or flashing light. What. In the case of vehicles with a maximum mass not exceeding 2000 kg:. THIS IS IP 54. 90 x 190 x 75 mm

Receiver 12/24v fixed (trinary) code and rolling code at 433,92 MHz or 868 MHz.

Operating with Trinitary Fixed Code or RollingCode Variable Issuers. Receiver with RSD radio module with connector allowing modification of working frequency. With 2 programmable channels with logic of operation mono-stable, bi-stable or timed.

Hydraulic motor EMFA Tor 2000, for heavy use swing doors of a maximum blade length of 4/6 metres (600KG/800kg), with an elegant triangular design.