KIT engine Pujol Marathon PRO Q II single phase for sliding doors up to 1000 kg residential, community or industrial. Equipped with electronic board and built-in receiver.

Irreversible 24Vdc motor with integrated control centre and absolute encoder, installed internally in a column of small dimensions, properly drilled.

The first engine Nice slippery for sliding doors up to 400 kg and a blade length of up to 6 m.

Motorcycles V2 Electromechanical doors for sliding doors of 500, 600, 800, 1000, 1200 and 1500 kg with magnetic finishes and digital maneuver board with encoder.

MX93 or MX94 double wall wireless control, applied to the surface for tubular motors Motorline.

With a truly revolutionary design, this double wall controller is on the front line regarding this issue. Ideal for houses with contemporary or modern architecture.

Repeat radio frequency signal at 433.92 MHz and 868 MHz quickly and easily to improve the emission range, only by connecting the repeater to 230 V. The repeater itself will be responsible for receiving the transmission of a control and sending it to the receiver improving emission power to achieve greater range.

Table of manoeuvres BFT "THALIA' with screen for one or two 24 V electromagnetic operators used in 230 V/500 W swing doors (in the Power version). The bi-channel radio receiver at 433 MHz has been incorporated.

It has an anti-crushing system based on D-Track technology, manages decelerations during opening and closing and has an electronic self-learning function.

The main functions include: automatic closing, rapid closing, partial opening and manned operation.

Kit Magnetic keys for manual key fitting Clemsa without the need for a duplicating machine.

Probe cable for PC-Copy machine with 3 and 4 pin outputs for fixed and evolutionary codes.

The ARI02 kit of Erreka they 're hardware to power sliding doors that are telescopic, and we supply it with a 3-metre guide and chain drive system.

This transmission kit is recommended for use on sliding engines with mechanical running ends.

PUJOL model WINNER PRO 600/200 designed to automate rolling shutters for garages and commercial premises, with lifting capacity up to 170 kg.

The WINNER PRO engine has no electro brake and is designed for 48/60mm axles and 200/220mm pulleys.

OXYGEN NYX 230V motor for residential sliding doors up to 1,000 kg, with built-in box-receiver and mechanical racing ends.

The 230V NYX electromechanical motor is thought to power light or heavy doors up to 1,000 kg for residential or industrial use.

Digital keyboard V2 KIBO backlit model by radio In the case of vehicles of categories M1 and N2 or wired version (requires DEC4 decoder).

Electronic control panel EMFA CRFEM with force regulation for electromechanical + hydraulic.

Issuer Nice It was One model "ON4CE" 4-channel at 433.92 MHz with multiple insertion sequential coding.

Electronic plate Forsa "Evolution' to replace the manoeuvring frames of the RAYO tilting engine.

The 'Evolution' manoeuvre panel is compatible with sliding doors or sliding doors. The built-in receiver Forsa NEWFOR 868 MHz is compatible with TP2 MINI transmitters (on request it can be supplied with GO DMIL receiver).

Electromechanical engine DEA "LIVI 902 SR' 230V for semi-intensive residential tilting doors up to 9 m2 with built-in analogue box-receiver.

The engine incorporates mechanical opening-closing stroke ends for more precise adjustment.

It's an old model.

External release mechanism BFT "SET/S' for insulated sectional and tilting doors up to 50 mm thick.

Issuers V2 PROTEO for tubular motors for domestic blinds and awnings.

Damper with regulation and magnet Medva"CIL3095" with 95mm stroke designed to dampen the closures of industrial sliding doors.

The linear damper CIL3095 – CIL30120 reduces the speed of the door during the final stretch of the tour, avoiding sudden knocks and personal injury. The speed can be adjusted according to the need of the installation. The shock absorber is automatically charged by the neodymium magnet each time the door is opened, being operational for the subsequent closing cycle.

The MT-23 is a receiver that is automatically tuned to remote control frequency without the need to select the frequency by dip-switch.

It works with fixed and evolutionary code commands simultaneously.

The receiver is tuned to a single Frequency.

Engine Erreka TORO for heavy residential, community or industrial sliding doors up to 1800 kg or 2500 kg with programmed cruising and deceleration, easy unlocking and magnetic race ends.

Control panel with built-in receiver Clemsa CR81 (433 MHz) or CR81.8 (868 MHz) for retractable closures.

Engine EMFA 24V SKYLINE model, for residential or industrial sliding doors up to 600 kg. This equipment has a system that allows the pinion to oscillate and adapt to the irregularities of the zipper, even at gradients of up to 35 mm.

A one-channel receiver operating in both mono-stable and bi-stable mode, capable of storing up to 500 12-bit or Rolling-Code codes.

It's only compatible with the controls Motorline model FALK and MX4SP.

Alkaline 9V battery of the brand GP. What. Blister x1

KIT engine Motorline SLIDE800A at 230V with oil and grease lubricated reducer for sliding doors up to 800kg semi-intensive use and IP44 protection.

KIT 24V engine DEA model TEO 700 of 1000N, designed to drive other, of circular cross-section. What. It is the manufacturer's cheap and easy to install solution DEA.

Issuer Aprimatic model TX4E with RollingCode coding system. 4 channel remote control at 433.92 MHz.

Unlock safe with NICE KIO key selector with wire pull mechanism, ideal for the unlocking of the electric brake in roll-over motors in the event of a power failure in order to operate the blind manually.

Digital manoeuvring chart V2 CITY2+ 230 V for sliding doors and doors equipped with two 24 V direct current motors.

Head Electric motor V2 AZIMUTH irreversible for sectional and tilting doors up to 8 m2.Starting force 500 N 50 kilos .

With this electronic card you can light up your garage by opening the door to the entrance or exit.

It is very easily placed on the control board and can be programmed to be turned on by pulse or timer.

Manufacture from materials of any heading Forsa transmitter-receiver NEW MINI ideal for outdoor use with a maximum range of 20 metres, where we have a small space for the installation of these safety devices.

Fixed support for mast barriers Motorline

End of race Erreka Bull KM1800 with Hall sensor.

Motor head EMFA MTCH of 800N and 1,000N with built-in receiver box for residential sectional doors.

Hydraulic oil 1 litre DEA reference 600H.

Engine Nice 24 V SPINBUS with magnetic encoder for sectional doors of up to 17,5 m2 and tilting doors of up to 14,7 m2.

Irreversible electromechanical gearbox motor 230 Vac for residential use, 24 Vdc motor with magnetic encoder. Use with SNA30 - SNA31 strap guides or SNA30C - SNA31C chain guides.

Receiver DEA external bi-channel with capacity to store 1000 emitters.

Alkaline battery AAA of 1.5 V LR03 of the brand GP. What. Blister x4

Motion detector FAAC XBFRM1 (single directional microwave radar).

Key selector Beninca Two-touch TOKEY with metal housing.

Kit's OXYGEN SARGON 230 V electromechanical motors for residential swing doors up to 3 m in length per sheet.

The engines of the SARGON series have a 300 mm stem and are designed for use in lightweight doors up to 250 kg.

Additional accessories to the electromechanical barrier V2 I'M GOING IN.

Leverage unlock PUJOL MINI MARATHON & MARATHON DC with pump and keys.

Hydraulic oil Clemsa/FAAC in a 2-litre bottle.

KIT Sliding engine BFT "DEIMOS ULTRA BT A" 24V electromechanical for charges of up to 400/600 KG with intensive use and magnetic run ends.