Control panel for one 230 V retractable drive. What. Power supply 230 Vac 50-60 Hz. Maximum load of the motor 1000 W. Power lock output 12 V 2A.

End of career Pujol WINNER PRO 600 (new model).

This end of race set is only compatible with the new WINNER PRO 600 model. It includes the electronic plate and the plastic case with the race finishes.

Infrared radar Motorline MR30 easy to install and extremely compact, developed to activate automatic doors at a distance of up to 3m.

DTM-Q remote control to duplicate quartz emitters from 26 MHz to 40 MHz.

* Special prices for professionals. Contact us to open your file.

Magnetic motor racing finish FAAC 740 and 741.

Transmitter FAAC TM XT1 433MHZ with 6 channels for tubing motors for household blinds.

Sensor FAAC XBFA of movement and presence over infrared radiation.

The ideal security for automatic curtain doors. Aperture and security in one sensor.

This is a universal maneuver chart DEA NET24N with screen and box 100 G, for 1 or 2 24 V DC motors, with or without magnetic encoder.

One-step selection of the type of engine used (slide, swing, tilting, barrier, sectional door, pylon), with automatic configuration of all inputs/outputs and usage parameters. Factory setting for sliding doors.

Rechargeable battery CR2025 of 3.6V to replace BMW.

The MF2020 is a column photocell developed to safeguard all types of industrial doors (sectional and fast doors) up to a maximum width of 10 metres.

The sender and receiver create a infrared grating it offers protection up to eight feet high.

When the infrared beams are interrupted, a signal is sent to the control room. After the holding area is clear, a new signal is sent to the control to indicate that the area is clear.

Key to unlock the bulbs Erreka PUMA, LYNX AND RHINO.

Column support for photocells and complementary accessories Motorline.

Sliding engine Nice ROAD 400 24V ideal for residential sliding doors manoeuvre chart SPRBA4R10 with built-in receptor and the race finals are mechanical. It has a smooth stopping when opening and closing the door.

Hydom MINIMAX rolling stock; ■ a complete range of telescopes, torsion bars and saxophone hardware according to the needs of the installation.

Electromechanical engine BFT BOTTICELLI SMART BT A for intensive or very intensive use, designed to automate sectional garage doors.

It has a very compact design, suitable for installation anywhere, thanks to the wide range of chain rails available in various lengths.

The control centre and the end of run with encoder and mechanical cap are incorporated, respectively, on the operator and the guide.

Engine Motorline KVM25 is a axle traction automation, for automation of other, of circular cross-section. What. It is ideal for all types of vertical opening doors due to its ease of installation, configuration and maintenance.

The LDD loop detector can be installed in most parking, traffic and vehicle access control applications for the control of barriers, doors, bollards and vehicle access equipments . Automatic frequency tuning and simple sensitivity adjustment provide easy setup and installation. The automatic increase in sensitivity ensures reliable detection of tall vehicles.

The indication Multicolored LED allows the user to easily adjust the inductance and indicates installation problems intuitively for easy diagnosis. The user individually assigned relay mode for 2 SPDT outputs provides easy adaptation to a multitude of applications. The directional logic in the double loop version can be used

230V Medva ELIOT electronic board with built-in receiver at 433 MHz.

Electric brakes for rolling stock Pujol Winner with 5-meter cable.

Of a thickness of V2 which prevents pedestrians from catching their fingers on the hinge edge.

OXYGEN ARTEMIS 230V sliding motor for residential sliding doors up to 800 kg, with built-in receiver box.

The 230V electromechanical ARTEMIS motor is thought to power light or heavy doors up to 800 kg for residential use.

Electronic plate V2 PD8M for sliding motors V2 GOLD.

The switchboard has a display for your programming, ensures safety and reliability in sliding door automations . The PD8 design has aimed at making a product that suits all needs, to achieve an extremely versatile control unit that meets all the necessary requirements for a functional and efficient solution.

Why EVO NOA is an all-in-one garage remote for automation, which allows you to have 4 different remote controls in just 1 (home, office, parking, etc.).

It's multi-frequency technology with both Fixed code like with rolling code.

Motor centre axle ACM for use in the manufacture of products falling within heading 8528, ideal for powering commercial doors or private garages.

Do not allow the engine to lock when the door is stopped or left closed, if there is no electricity, you can climb by hand. It is recommended to use in places where there is NO alternative access to the shop/garage or an external brake unlocker cannot be installed, as when there is no electric current it can be operated manually.

A micro receiver of 12/24v of 2 channels, with capacity for 400 codes or 1,000 codes.

The configuration and management of this receiver is done with the PC-Copy Duplicator.

Engine Pujol Marathon PRO Q II single phase for sliding doors up to 1000 kg residential, community or industrial. Equipped with electronic board and built-in receiver.

Hydraulic lock, 1.4 m whip and rotor-unic tilting rack

Triangular three-key game of unlocking CAME 119RIY077

Supported cable Erreka ORION (3 threads of 0,25 mm2 + mesh).

Notes: Sold in 10 metre coils.

Issuer of the copy Remocon RMC165CM for fixed code duplication at 433,92 MHz and low frequency.

The duplication must be done with the machine Remocon HDC 900.

* Special prices for professionals. Contact us to open your file.

The system consists of a TX module and an RX module. Used to equip sectional doors fitted with an inserted pedestrian door. What. It can be used with external magnetic or mechanical contact, or with internal magnetic contact. This allows you to know the state of the pedestrian door (open or closed).

Contactless proximity key reader Clemsa CK40 1 channel and CK42 2 channels for use with TD420/U decoders.

Engine Nice ROX600 is a 230 V electromechanical gearbox motor designed to automate sliding doors up to 600 kg for residential use: has an electronic control unit incorporating a 433,92 MHz radio receiver with coding FLO, FLOR, OPERA, HCS SMILO.

ATTENTION: THE NICE ROX600 ENGINE HAS BEEN DISCONTINUED BY MODEL THEFT600 OF BETTER BENEFITS.

Roof motor Erreka NAOS for sectional garage doors up to 11m2 24Vdc with encoder capable of lifting up to 70 kg. What. Includes receiver for up to 20 codes.

Machinery for making pulp of fibrous cellulosic material Clemsa, to detect vehicles (cars or motorcycles) when that vehicle passes over the door, it reverses the maneuver just as if we were passing in front of a photocell. A magnetic loop is also usually installed to prevent an owner from opening the door to enter on foot, therefore the door would only open if the magnetic loop detects a vehicle in the area where the winding is installed (usually in the buried ground).

RFID proximity card from Clemsa for the readers CK40 and CK42.

Electric motor with 230 V Medva ELIOT for residential, communal or industrial sliding doors up to 600 or 1000 kg with built-in manoeuvring frame and 433,92 MHz receiver.

Mechanical lock or bolt for locking swing gates with two blades. What. It shall be applied in conjunction with an electric lock to ensure that the gate is locked. Possibility of application on the left or right (reversible).

Hydraulic motor BFT BERMA intensive use at 230V indicated for tilting doors up to 9m2. What. Manufactured to withstand the harshest conditions of use, it combines strength and operator reliability BFT. 

Change the environment of your home, control devices and program routines easily with the range Motorline MCONNECT BRIDGE. What. Through your smartphone or tablet and, with one tap, controls the opening and closing of the garage door (MCONNET BRIDGE) and turn on and off your lights (MCONNECT DUAL SWITH), blinds and curtains (MCONNECT SHUTTER).

Electronic plate BFT SHYRA CPEM for sliding, swinging, swinging and rolling shutters with LCD screen programming.

It has a removable knob to connect accessories that extend the functionality of this control board. Up to 63 controllers with Rolling Code technology can be installed, which you can also buy in our product catalogue, always with the best price and reliable quality of the leading brands in the automation market.

Sliding motor unlocking knob assembly TMP Sprint low.

KIT engine Motorline BRAVO500 at 230Vac with oil and grease lubricated reducer for sliding doors up to 500kg and IP44 protection.

The unlock cabinet of Pujol it's a Mini Box that allows us to unlock the electric brake in case of a power failure of a roller shutter motor. It incorporates an internal push-button for automatic rise, fall and stop in case of electric current.

Emitter of evolutionary code copy type Keeloq 433 MHz

Command for evolutionary code duplication of the Keeloq type: Clemsa Mutant code, Pujol The Vario, the NEO, BFT, Erreka, Dea, AERF, among others.

* Special prices for professionals. Contact us to open your file.

JAG engine kit of Motorline electrical engineer for use in the manufacture of products falling within heading 8528 [1] up to 4 metres/leaf (JAG400) and for doors up to 6 m/sheet (JAG600). Irreversible motor incorporating electric running ends in opening and closing.

Electromechanical engine DEA LOOK in 230V or 24V format for swing doors of 2, 3 or 5 metres in length.

OXYGEN ARTEMIS 230V sliding motor for residential sliding doors up to 800 kg, with built-in receiver box.

The 230V electromechanical ARTEMIS motor is thought to power light or heavy doors up to 800 kg for residential use.